Kitchen Kompact Warmwood replacement door gives you a 27 inch high by 6-1/2 inch wide recessed panel door that matches the Warmwood style for cabinet repairs or layout changes. The door frame uses solid 3/4 inch oak, maple or beech, so the frame puts real hardwood at the working edges where hinge boring, alignment, and day-to-day use happen. Each rail is kiln-dried, which stabilizes the wood so the door helps hold its shape as humidity changes in a typical kitchen. Those rails are joined by a mortise and tenon connection and then glued, creating a strong joint at every corner that stands up to repeated opening and closing. Solid wood corner blocks are glued and power nailed, tying the frame together so the door resists racking when mounted. The recessed panel layout matches Kitchen Kompact Warmwood design, supporting visual continuity when replacing or adding a narrow cabinet front.
This Kitchen Kompact Warmwood replacement door is identified as WW27X6, reflecting a 27 inch by 6-1/2 inch format that suits narrow cabinet openings in a Warmwood run. The solid 3/4 inch hardwood frame depth supports standard cabinet door hinge boring operations, since there is enough material to hold common hinge cup pockets without breaking through the front face. Kiln-dried rails in the frame help limit seasonal expansion and contraction, which supports consistent reveals when doors are aligned across a wall or base run. Mortise and tenon joints at the corners give the frame a positive mechanical lock, so when hinges are adjusted, the door behaves as a single, stable unit instead of flexing at the joints.
The Kitchen Kompact Warmwood cabinet door WW27X6 works wherever a 27 inch high by 6-1/2 inch wide recessed panel front is needed within a Warmwood kitchen layout. The narrow width fits vertical fillers, small pull-out sections, or slim wall cabinet fronts that still need a full-height Warmwood face. Solid 3/4 inch oak, maple or beech in the frame gives enough edge material for hinge placement along the 27 inch stile, which supports typical overlay runs. The recessed panel Warmwood design allows this door to visually sit alongside other Kitchen Kompact Warmwood units, supporting consistent appearance from base cabinets up through wall cabinets that share this height.
The solid wood Warmwood cabinet door frame gives a dependable base for hinge cup boring and screw holding, so hinge positions can be laid out with confidence that the substrate is full-thickness hardwood. Kiln-dried rails help the door maintain a flatter plane once hung, which reduces the amount of hinge adjustment needed to keep margins even over time. Mortise and tenon cabinet door construction, glued at the joints, produces a rigid rectangle, so the weight of the door works through the frame rather than stressing a single joint. Solid wood corner blocks that are glued and power nailed stiffen each corner, so the door resists twisting when opened from the outer stile. Together, these details create a replacement door that supports straightforward hinge alignment and helps maintain consistent reveals across Warmwood cabinets after installation.
The Kitchen Kompact Warmwood replacement door is 27 inches high by 6-1/2 inches wide, which suits narrow but full-height cabinet openings in a Warmwood layout.
The Kitchen Kompact Warmwood door frame is built of solid 3/4 inch oak, maple or beech, giving hardwood strength at the edges where hinges and pulls are mounted.
The Warmwood door rails use mortise and tenon joints that are glued, creating mechanically locked, reinforced corners that support long-term square alignment.
Each rail is kiln-dried, which stabilizes the wood, so the Warmwood door is better able to hold its shape and keep more even gaps between doors.
Solid wood corner blocks are glued and power nailed, tying the frame corners together so the door resists racking when opened or closed from the outer edge.
This door is identified as a Warmwood door with part number WW27X6, aligning it with the Kitchen Kompact Warmwood recessed panel cabinet style.
The Kitchen Kompact Warmwood cabinet replacement door WW27X6 combines a 27 inch by 6-1/2 inch recessed panel format with a solid 3/4 inch hardwood frame, kiln-dried rails, mortise and tenon joints, and solid wood corner blocks. Those verified construction details support hinge boring, screw holding, and long-term frame stability when tied into a Warmwood cabinet run. For narrow, full-height openings where a Warmwood look is required, this door provides a matched style and a construction build that supports consistent alignment with adjacent Kitchen Kompact fronts.
Sold In: 1 Each