Kitchen Kompact Warmwood replacement door gives you a matched 9 inch wide by 12 inch high recessed panel door for existing Warmwood kitchen runs. The WW9X12 part identification ties directly to the Warmwood door style, which helps keep a consistent look across repaired or remodeled cabinet sections. All frames are built of solid 3/4 inch oak, maple or beech, which provides a solid wood frame structure for dependable cabinet door strength in everyday use. Each rail is kiln-dried, so the door frame components start with stable lumber, helping maintain fit as temperatures and humidity change in a typical kitchen environment. The mortise and tenon joints between frame pieces are glued, creating a strong mechanical joint that supports repeated door opening and closing without loosening under normal cabinet service.
The Kitchen Kompact 9 inch W x 12 inch H Warmwood replacement door gives installers a clearly defined size to plan hinge layout and reveal. Because the frame is solid 3/4 inch oak, maple or beech, hinge mounting lands on solid wood, supporting secure fastener bite along the stile. Kiln-dried rails joined by mortise and tenon and then glued create a frame that stays tight at the corners, which supports consistent gaps around the door opening. The recessed panel layout works with standard frame-and-panel cabinet construction, helping this door integrate smoothly into typical Warmwood cabinet runs that rely on the same profile.
The Kitchen Kompact Warmwood replacement door with WW9X12 designation is used wherever a 9 inch wide by 12 inch high door is called out in a Warmwood kitchen layout. This size works on narrow cabinet sections, allowing installers to match doors on small wall or base units. The recessed panel design lines up visually with other Warmwood recessed panel fronts, supporting a uniform appearance across adjacent cabinets. Because the frame is built from solid 3/4 inch oak, maple or beech, the door fits naturally into wood cabinet constructions that expect solid framing around the opening. The Warmwood styling and dimensions let you target specific spots in an existing Kitchen Kompact installation that require a replacement door.
Each rail of the Warmwood WW9X12 door is kiln-dried, which means the frame components are conditioned before assembly to support dimensional stability once installed. Mortise and tenon joints between these rails and the mating stiles are glued for added strength, so the frame behaves as a single unit when hung on hinges. This construction helps keep the door square, which in turn supports even reveals along the top and bottom of the cabinet opening. The solid 3/4 inch oak, maple or beech frame gives hinge screws a deep wood base, supporting long-term grip where hinges fasten to the stile. For cabinet runs using Kitchen Kompact Warmwood fronts, this door brings matching style and construction details that support repeatable alignment and appearance across multiple replacement or remodel locations.
The Kitchen Kompact 9 inch W x 12 inch H Warmwood replacement door provides a defined size, helping installers lay out hinge locations and door reveals around small cabinet openings.
The Kitchen Kompact Warmwood replacement door uses a recessed panel design, giving cabinets a framed panel look that ties into other Warmwood recessed panel fronts in the same kitchen.
The Warmwood replacement door frame uses solid 3/4 inch oak, maple or beech, with each rail joined by mortise and tenon and glued, giving the door a strong, unified frame structure.
The Warmwood door rails are kiln-dried, so the frame components start dimensionally stable, supporting consistent fit as kitchen temperature and humidity change during normal service.
The WW9X12 Warmwood door part number identifies a 9 inch by 12 inch recessed panel Kitchen Kompact door, helping installers match existing Warmwood layouts during repairs or expansions.
The Warmwood replacement door uses a solid 3/4 inch oak, maple or beech frame, giving hinges a solid wood landing area that supports secure fastener grip along the stile.
The Kitchen Kompact 9 inch W x 12 inch H Warmwood replacement door, part WW9X12, pairs a recessed panel style with a solid 3/4 inch oak, maple or beech frame for strong, stable service. Kiln-dried rails joined by glued mortise and tenon joints help maintain a square frame as conditions change, supporting even cabinet reveals. For Warmwood kitchen runs that need a 9 inch by 12 inch door replaced or added, this door keeps style and construction in line with existing Kitchen Kompact cabinetry. Use this Warmwood replacement door when a defined WW9X12 size and matching recessed panel appearance are required for the job.
Sold In: 1 Each