Kitchen Kompact Warmwood replacement door gives you a 33 inch high by 12 1/2 inch wide Warmwood door sized to match the WW33X12 cabinet opening, so you can swap a damaged front while keeping the existing Kitchen Kompact run consistent. The door is identified as WARMWOOD DOOR 33 X 12 1/2 and carries manufacturer part WW33X12, which ties it directly to the Kitchen Kompact cabinet line for straightforward selection when you are matching an existing layout. The recessed panel style keeps the face profile aligned with other Kitchen Kompact Warmwood components, which matters when you are tying into an original installation and want stiles and rails to read the same across a wall of units.
The Kitchen Kompact Warmwood replacement door is tied to the WW33X12 part number, so its 33 inch by 12 1/2 inch sizing is set up for that Kitchen Kompact cabinet footprint and keeps reveals predictable when you hang it in place of the original. Because the cabinet line uses solid wood hanging strips at the top and bottom on wall and base cabinets, hinge mounting lands on solid material, which supports consistent screw bite and holds the door position once it is adjusted. The solid-wood frame construction around the recessed panel gives you reliable screw holding at the stile edges, which matters when you are aligning gaps and need the hinge plates to stay put over time.
This Kitchen Kompact cabinet door is identified by manufacturer part WW33X12 and described as WARMWOOD DOOR 33 X 12 1/2, which positions it specifically for Warmwood runs built around that cabinet size in the Kitchen Kompact line. In a repair or upgrade, that direct tie to the Kitchen Kompact catalog lets you match an existing Warmwood layout without reworking surrounding cabinets, because the height and width are set to the same standard used when the run was originally installed. The recessed panel style keeps the face detail in line with other Warmwood fronts, so when you hang this on a WW33X12 opening the panel depth and frame look remain consistent across neighboring doors and drawers in the same kitchen.
All frames on these Kitchen Kompact components are built of solid 3/4 inch oak, maple or beech, which gives the rails and stiles enough thickness and strength to hold hinge screws and door hardware under daily kitchen use without crushing the edge. Each rail is kiln-dried, then joined by mortise and tenon and glued, creating tight, long-grain joints that resist racking when the door is pulled from one corner. Solid wood corner blocks in the cabinet, together with solid wood toe kicks and solid wood hanging strips, form a rigid base and hanging structure, so once the Warmwood door is mounted and aligned to the WW33X12 opening the cabinet box does not flex and change the reveal. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers keep the cabinet sides straight, which helps maintain even gaps along exposed ends where the door closes against the case.
The Kitchen Kompact Warmwood replacement door is identified as WARMWOOD DOOR 33 X 12 1/2 with part WW33X12, aligning it with Kitchen Kompact cabinets using that 33 inch by 12 1/2 inch front.
The solid 3/4 inch oak, maple or beech frame gives the door thick, strong edges for mounting hinges and handling everyday opening without crushing or splitting at the stile.
The Kitchen Kompact door frame uses mortise and tenon joints that are glued, so the rails lock into the stiles and resist racking when the door is pulled from one side.
Each rail is kiln-dried, which stabilizes the wood before assembly and supports a door that holds its shape as humidity changes in normal kitchen environments.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide firm fastening zones so the mounted door keeps its alignment over time.
End panels with 3-ply construction and a 1/2 inch engineered wood core keep cabinet sides straight, helping the Warmwood door close against a consistent case edge.
The Kitchen Kompact Warmwood replacement door with part WW33X12 gives you a recessed panel front sized at 33 inches by 12 1/2 inches for that specific Kitchen Kompact cabinet opening, so you can match an existing Warmwood installation while relying on solid 3/4 inch frame construction, kiln-dried mortise and tenon rails, and a rigid cabinet structure that supports stable reveals once the door is hung.
Sold In: 1 Each