Kitchen Kompact replacement door gives you a Warmwood 15-1/2 inch wide by 33 inch high recessed panel door sized as WW33X15, so you can match an existing Kitchen Kompact layout when you need a door in this specific opening. This Kitchen Kompact Warmwood door uses a recessed panel design, which keeps the face clean and straightforward for a consistent look across Warmwood cabinets on a run. All frames on this door are built of solid 3/4 inch oak, maple or beech, which provides a robust frame structure that holds hinges and daily use stresses in normal cabinet applications. The solid 3/4 inch frame construction supports long-term door alignment around the opening and helps the door hang square in the cabinet run. The Warmwood finish identity on this WW33X15 model ties directly to Kitchen Kompact Warmwood cabinet lines, so replacement work keeps a uniform series and size labeling.
The WW33X15 Warmwood door uses a solid 3/4 inch frame of oak, maple or beech, so hinge screws have substantial material to bite into when attaching the door to a Kitchen Kompact cabinet. Kiln-dried rails joined with mortise and tenon joints and glued for added strength hold the stiles and rails together in a square frame that supports accurate reveals between the door edge and cabinet face. Solid wood corner blocks that are glued and power nailed further brace the frame, helping the door maintain its intended geometry along the cabinet run. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give the cabinet carcass firm top and bottom mounting zones that help maintain consistent door gaps. The 3-ply end panel construction with a 1/2 inch thick engineered wood core and hardwood veneers stabilizes cabinet sides, which supports reliable hinge alignment relative to the Warmwood door.
This Kitchen Kompact Warmwood door, identified as WW33X15, is sized for openings needing a 33 inch high by 15-1/2 inch wide recessed panel door in a Kitchen Kompact Warmwood run. The solid 3/4 inch oak, maple or beech frame gives the door the rigidity expected in Kitchen Kompact cabinet frames, which suits wall or base cabinet positions matching this size. In a Warmwood kitchen layout that uses solid wood hanging strips at the top and bottom of wall and base cabinets, this door fits into a system designed around those solid wood strips and solid wood toe kicks. The 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers create a consistent structural context for the hinges that carry this solid frame door in the cabinet run.
The kiln-dried rails joined with mortise and tenon joints and glued for added strength support repeatable alignment because the door frame is designed to stay tight over time. When paired with solid wood corner blocks that are glued and power nailed, the corners resist spreading, which keeps door edges tracking straight along cabinet faces. Solid 3/4 inch frame material in oak, maple or beech creates a robust hinge-mounting zone, so hinge screws engage well-defined grain in solid wood for reliable holding. Solid wood hanging strips on wall and base cabinets, positioned at the top and bottom, work with the rigid door frame to keep reveals steady along the height of the cabinet. End panels with 3-ply construction around a 1/2 inch thick engineered wood core and hardwood veneers maintain stable cabinet sides, which supports consistent hinge spacing and helps the Warmwood door sit flush across adjoining units.
The Kitchen Kompact replacement door is 15-1/2 inches wide and 33 inches high, matching the WW33X15 size used in Warmwood cabinet layouts where this specific opening is required.
The Warmwood door frame is built of solid 3/4 inch oak, maple or beech with kiln-dried rails joined by mortise and tenon and glued, which creates a strong, square frame for mounting hinges.
The door uses solid wood corner blocks that are glued and power nailed, which brace the corners so the door keeps its rectangular shape and helps margins stay even along the cabinet.
Kitchen Kompact wall and base cabinets use solid wood hanging strips at the top and bottom, giving a stable cabinet structure that supports accurate alignment of the Warmwood door on the face.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing stable cabinet sides that help hinges hold the Warmwood door in consistent alignment.
This Warmwood door uses a recessed panel design, giving a defined frame-and-panel look that matches Kitchen Kompact Warmwood styling across coordinated cabinet runs.
The WW33X15 Kitchen Kompact Warmwood door combines a 15-1/2 inch by 33 inch recessed panel face with a solid 3/4 inch oak, maple or beech frame, so it matches Warmwood sizing and construction in Kitchen Kompact cabinet runs. Kiln-dried mortise and tenon rails, glued joints, and solid wood corner blocks provide a stable structure that works with solid wood hanging strips and 3-ply end panels in the surrounding cabinet assembly. For jobs built around Kitchen Kompact Warmwood dimensions and construction details, this replacement door keeps the frame design, panel style, and size consistent from unit to unit.
Sold In: 1 Each