Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood replacement door gives you a 15-1/2 inch wide by 15 inch high recessed panel door sized for Warmwood cabinet runs, so you can swap a damaged front while keeping the original style consistent across the kitchen. The frame is built of solid 3/4 inch oak, maple, or beech, which provides a robust edge for hinges and everyday use in a busy cabinet line. Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating a tight, stable joint that helps the door stay square after installation. Solid wood corner blocks are glued and power nailed, tying the frame together at stress points where doors take daily handling. This Warmwood door configuration matches Kitchen Kompact construction standards, helping installers maintain a uniform look when replacing doors in existing Kitchen Kompact layouts.
This Kitchen Kompact cabinet door uses the WW15X15 configuration, described as Warmwood door 15 x 15 1/2, so it aligns with cabinet openings sized for that standard within the Warmwood line. The recessed panel style keeps the face profile in step with other Kitchen Kompact Warmwood fronts, which is useful when only one or a few doors are being replaced in an existing job. Because the frame uses solid 3/4 inch wood, hinge mounting positions along the stile have a consistent thickness, which supports accurate drilling and hardware layout. Solid wood hanging strips at the top and bottom of the wall and base cabinets back up the case, so once the door is hung on the carcass, the overall assembly is ready to handle regular opening cycles.
The WW15X15 Kitchen Kompact cabinet door is used where a 15-1/2 inch wide by 15 inch high Warmwood recessed panel front is specified, such as smaller wall cabinets or specific base cabinet configurations in that line. In Kitchen Kompact layouts built around Warmwood finishes, this door keeps the look continuous, because it follows the same recessed panel profile and frame construction. The solid 3/4 inch oak, maple, or beech frame lets installers tie into existing hinge patterns on Warmwood cabinets, maintaining uniform gaps between doors. Solid wood hanging strips in the cabinet carcass, set at the top and bottom, support the case behind this replacement door, so the hinge side has reliable backing. End panels built with a 3-ply, 1/2 inch engineered wood core and hardwood veneers hold the cabinet box square, which lets the WW15X15 door swing cleanly within the opening.
The rail construction on this Kitchen Kompact Warmwood replacement door relies on kiln-dried stock joined with mortise and tenon and then glued, giving the joints a tight mechanical connection that resists loosening and sagging. Solid wood corner blocks, glued and power nailed, further stabilize the frame, so the door responds predictably when adjusted on its hinges to tighten reveals. Because the frame is a full 3/4 inch thick in solid wood, edge boring for hinges stays within solid material, which supports firm screw hold and smooth door action. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers help the cabinet maintain its shape around the door opening, keeping the WW15X15 replacement aligned with neighboring fronts. Solid wood toe kicks in the Kitchen Kompact construction support base cabinets carrying this Warmwood door, which helps the entire cabinet stay steady during long-term use.
The Kitchen Kompact WW15X15 Warmwood replacement door is described as 15-1/2 inches wide by 15 inches high, which sets its fit for cabinet openings designed around that size.
The frame of the Warmwood replacement door is built of solid 3/4 inch oak, maple, or beech, giving a dense, stable structure for hinge mounting and daily cabinet use.
The rails on this Kitchen Kompact cabinet door are kiln-dried, joined by mortise and tenon, and then glued, which creates tight joints that help the door remain square over time.
The Warmwood door uses solid wood corner blocks that are glued and power nailed, reinforcing the corners where doors see repeated handling and impact.
Solid wood hanging strips on wall and base cabinets, positioned at the top and bottom, provide a strong anchor for the cabinet case that carries the Warmwood door.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, helping the cabinet stay square around the Warmwood replacement door opening.
The Kitchen Kompact Warmwood replacement door WW15X15 pairs a 15-1/2 inch by 15 inch recessed panel front with solid 3/4 inch wood frame construction, making it a direct fit for Warmwood layouts built to that size. Kiln-dried, mortise and tenon, glued joints, along with solid wood corner blocks, give this door a stable structure suited to everyday kitchen use. Within Kitchen Kompact cabinets using solid wood hanging strips, engineered-core end panels, and solid wood toe kicks, this Warmwood door helps maintain a consistent, finished appearance across the run.
Sold In: 1 Each