Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood replacement door is a recessed panel door sized 15-1/2 inches wide by 18 inches high, so it matches the WW18X15 opening layout when replacing a Warmwood door in that size. The door uses frames built of solid 3/4 inch oak, maple, or beech, giving a hardwood frame structure that stands up to normal cabinet use and handling. Each rail is kiln-dried, joined by mortise and tenon, and glued, creating a stable, tight joint that helps the door stay square over time. The Warmwood style is part of the Kitchen Kompact cabinet line, so this door keeps the same design family when swapping out a damaged or worn front. The recessed panel profile aligns visually with other Kitchen Kompact recessed panel components, supporting a consistent look across a run of cabinets.
This Warmwood door is identified as WW18X15, describing an 18 inch high by 15-1/2 inch wide replacement, so it targets openings laid out for that Kitchen Kompact size. The solid hardwood frame construction around the recessed panel gives installers material thickness at the perimeter, which supports standard hinge boring and edge operations used on cabinet doors. Because the rails are kiln-dried and mortise-and-tenon joined, the joints are designed to remain tight under typical indoor conditions, supporting reliable alignment with adjacent doors. The Warmwood designation ties back to the Kitchen Kompact cabinet series, so using this door in a repair or refacing project keeps the Warmwood look consistent.
The Kitchen Kompact Warmwood 15-1/2 inch wide by 18 inch high recessed panel door is suited to cabinet openings originally built around the WW18X15 Warmwood specification, such as upper or base cabinets sized to that door height and width. Because it matches the Kitchen Kompact Warmwood cabinet line, it works in situations where an existing Warmwood door has been damaged and needs a direct-size replacement to maintain the same recessed panel style. The solid 3/4 inch oak, maple, or beech frame gives the door enough edge material for hinge locations along the stile, fitting standard cabinet construction practices for this size range. Using a door labeled with the same WW18X15 part number allows planners to align door sizes across multiple cabinets when laying out replacements.
The kiln-dried rails with mortise-and-tenon joints are designed to limit movement at the corners, which supports consistent reveals between doors in a run. Glue used at the joints adds strength at every connection point, which helps the frame stay tight during normal use and when doors are opened and closed frequently. The recessed panel design centers the panel within a solid hardwood frame, so most hinge loads are carried by the 3/4 inch thick oak, maple, or beech members rather than the center panel. This frame-focused structure is useful when boring for standard concealed hinges, as it concentrates drilling into solid wood for better fastener holding. Matching the Warmwood recessed panel profile across cabinets lets installers keep sightlines and panel lines uniform, which matters when replacing only one or a few fronts in an existing Kitchen Kompact Warmwood installation.
The Kitchen Kompact Warmwood WW18X15 door is 15-1/2 inches wide by 18 inches high, so it fits cabinet openings laid out for that specific Warmwood door size.
The Warmwood replacement door frame is built of solid 3/4 inch oak, maple, or beech, giving a hardwood structure suitable for hinge boring and everyday cabinet operation.
The Warmwood door uses kiln-dried rails joined by mortise and tenon and then glued, which creates tight, stable corners that help the door stay square in service.
The WW18X15 part number identifies a Warmwood recessed panel door that is 18 inches high and 15-1/2 inches wide, simplifying matching to existing Warmwood cabinet layouts.
The Warmwood door uses a solid 3/4 inch hardwood frame around the panel, providing edge thickness commonly used when boring for concealed cabinet hinges.
The Warmwood recessed panel design matches other Kitchen Kompact Warmwood fronts, so replacing a WW18X15 door maintains the same style lines across adjacent cabinets.
The Kitchen Kompact Warmwood replacement door in size 15-1/2 inches by 18 inches provides a recessed panel front that aligns with the WW18X15 Warmwood cabinet standard. With a solid 3/4 inch oak, maple, or beech frame and mortise-and-tenon, glued joints, it is designed for typical cabinet hinge boring and daily operation. When a Warmwood door in this size needs to be swapped, choosing the Kitchen Kompact Warmwood WW18X15 part keeps dimensions, style, and frame construction consistent with the rest of the installation.
Sold In: 1 Each