Kitchen Kompact Warmwood replacement door in size 9-1/2 inch wide by 18 inch high provides a matched recessed panel door solution when working with Warmwood cabinets. The door uses a recessed panel style, so it maintains a consistent look where this profile is already installed and keeps finished runs visually aligned. The frame is built of solid 3/4 inch oak, maple, or beech, which gives you a solid-wood frame structure suited to typical cabinet use. Each rail is kiln-dried before assembly, so the frame components start out properly conditioned for stable performance in normal interior environments. The rails are joined by mortise and tenon, then glued, creating a traditional joint that supports long-term strength at the corners. This Kitchen Kompact door is identified by manufacturer part number WW18X9, which ties directly to the Warmwood door line for straightforward selection when matching existing fronts.
This Kitchen Kompact cabinet door provides a 9-1/2 inch by 18 inch front that installers can use anywhere the casework is framed to accept that opening, giving a predictable footprint for hinge and edge layout. The solid 3/4 inch oak, maple, or beech frame supplies a consistent edge thickness around the perimeter, which helps when positioning hinge cups or edge-mount hinge locations relative to the door face. Because each rail is kiln-dried and joined with mortise and tenon, the frame is engineered to keep corners square, which supports clean reveals when the door is aligned to adjacent fronts. The recessed panel style sits inside the frame, so hinge positioning can focus on the solid-frame section while the center panel provides the intended Warmwood profile on the visible face.
The WW18X9 Warmwood recessed panel door is sized at 9-1/2 inch wide by 18 inch high, so it fits cabinet layouts using this specific module, whether in wall or base positions built for that door size. Because the frame is solid 3/4 inch oak, maple, or beech, the door works in cabinet runs where solid-wood frames are already present, helping maintain consistency in material at the front of the casework. The recessed panel configuration aligns with Warmwood styling, so when this door is placed next to other Warmwood doors, the panel depth and frame appearance work together visually across the installation. The Kitchen Kompact brand connection ties this door directly to the Kitchen Kompact cabinet family, which is helpful when the job involves matching or extending an existing Warmwood series installation in a kitchen or similar interior setting.
The solid 3/4 inch oak, maple, or beech frame on this Kitchen Kompact door provides a uniform thickness around the edges, which supports repeatable drilling and mounting for hinges and helps maintain consistent reveal lines. Kiln-dried rails joined by mortise and tenon and then glued create a frame structure designed to hold corners in alignment, which reduces the likelihood of twist that could affect door swing or gap uniformity. The recessed panel is captured by this solid-wood frame, so the structural load of everyday opening and closing concentrates in the frame members, supporting stable performance in regular cabinet use. The defined 9-1/2 inch by 18 inch sizing supports layout planning, because once the cabinet opening is framed for this dimension, the WW18X9 Warmwood door can be used repeatedly wherever that same module appears in the run.
The WW18X9 Warmwood door is 9-1/2 inch wide by 18 inch high, giving installers a defined footprint for cabinet openings designed around this specific module size.
The Kitchen Kompact door frame is built of solid 3/4 inch oak, maple, or beech, providing a solid-wood front that suits typical cabinet door use in interior environments.
The rails on this Warmwood recessed panel door are joined by mortise and tenon and then glued, creating interlocking corner joints that support alignment and structural strength.
This cabinet door uses kiln-dried rails so the solid wood is conditioned before assembly, supporting stable performance and helping the frame hold its shape in normal interior use.
The Kitchen Kompact Warmwood door uses a recessed panel style, so the center panel sits inside the solid frame and matches other Warmwood recessed panel fronts.
The WW18X9 part number identifies this Warmwood door as a 9-1/2 inch by 18 inch recessed panel model within the Kitchen Kompact Warmwood line.
The Kitchen Kompact Warmwood replacement door in 9-1/2 inch by 18 inch sizing offers a recessed panel front that aligns with existing Warmwood installations. The solid 3/4 inch oak, maple, or beech frame, kiln-dried rails, and mortise-and-tenon construction create a door built around proven cabinet joinery. Using the WW18X9 part number ties your selection directly to the Warmwood series, which helps maintain consistent appearance and structure when replacing or extending doors in a run. For projects built around Kitchen Kompact Warmwood casework, this door slots into layouts using this module size and supports a uniform finished look across the installation.
Sold In: 1 Each