Kitchen Kompact Warmwood replacement door gives you a 14 inch wide by 12 inch high door sized specifically as a Warmwood recessed panel replacement, so you can match the WW12X14 opening and keep existing cabinet runs visually consistent. The Kitchen Kompact brand and WW12X14 manufacturer part number identify this door as a direct Warmwood door solution, which simplifies ordering for repeat work across multiple kitchens or phased remodels. All frames are built of solid 3/4 inch oak, maple or beech, so the door frame provides a substantial edge for hinge boring, handle drilling and routine adjustments over time. Warmwood styling and the recessed panel layout support continuity with other Kitchen Kompact pieces, which matters when tying new work into existing installations. The solid-frame approach suits professional installers and serious DIY buyers who want a wood door structure ready for standard cabinet shop operations.
The Warmwood cabinet door 12 x 14 sizing aligns with WW12X14 labeling, so it coordinates with corresponding cabinet layouts during replacement or new installation. Solid 3/4 inch oak, maple or beech frames give a predictable edge thickness for hinge layout, simplifying jig setup and hinge cup drilling passes. Mortise and tenon joints that are kiln-dried and glued provide a rigid frame, which helps doors hang square on the cabinet and stay aligned after hardware installation. Solid wood hanging strips on wall and base cabinets at the top and bottom create consistent screw zones, so installers can plan stud locations and fastener patterns ahead of time. The 3-ply end panel construction with a 1/2 inch engineered core and hardwood veneers supports case alignment with the door plane, helping the Warmwood replacement door sit properly in the overall run.
The Kitchen Kompact Warmwood replacement door is identified as WW12X14, aligning with a 14 inch wide by 12 inch high opening in Warmwood cabinet layouts, so it suits locations where that specific size is required within a run. The recessed panel style coordinates with Warmwood cabinet components, helping maintain a consistent front appearance when tying new doors into existing Kitchen Kompact lines. All frames built of solid 3/4 inch oak, maple or beech mean the door frame behaves like other Kitchen Kompact wood fronts during machining, so installers can use familiar boring, routing and sanding steps across the entire project. In a cabinet system using solid wood toe kicks that are 3/4 inch thick, this door matches a cabinet platform designed to carry the vertical load of the case while presenting a sturdy base, which supports stable door operation over time. End panels using 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers create a stable cabinet side, helping this Warmwood replacement door align predictably with adjacent surfaces in longer runs.
Each rail on the Warmwood door is kiln-dried, joined by mortise and tenon, and then glued for added strength, so installers can expect a rigid frame that helps hinges hold door alignment under daily use. Solid wood corner blocks that are glued and power nailed bring strength to cabinet corners in the broader Kitchen Kompact system, which supports the loads transferred by the Warmwood door when it opens and closes. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, create defined mounting zones that work with the door weight, aiding in accurate placement and long-term cabinet stability. End panels with 3-ply construction and a 1/2 inch engineered wood core offer balanced dimensional stability, helping the door margins stay even against the cabinet opening as seasons change. The solid 3/4 inch oak, maple or beech frame specification gives enough material around the perimeter for precise hardware positioning, which supports repeatable results across multiple Warmwood cabinets on a job.
The Kitchen Kompact Warmwood replacement door is 14 inches wide by 12 inches high, which matches the WW12X14 size designation for fitting that specific cabinet opening.
The Warmwood door frame uses solid 3/4 inch oak, maple or beech, giving a substantial edge for hinge cups, handle drilling and standard cabinet machining operations.
The Warmwood door rails are kiln-dried, joined by mortise and tenon, and glued, providing strong joints that help keep the door square and stable during daily opening and closing.
The cabinet end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, supporting stable sides that keep door gaps more consistent.
Kitchen Kompact cabinets have solid wood hanging strips on wall and base cabinets, located at the top and bottom, giving defined areas for mounting fasteners into wall structure.
The solid wood toe kicks are 3/4 inch thick, supporting the base cabinet structure so the Warmwood door operates on a cabinet that can handle vertical loads at the floor line.
This solid wood Warmwood cabinet door, identified by the WW12X14 part number, matches a 14 inch wide by 12 inch high Warmwood opening, helping keep cabinet fronts consistent on new work or replacements. With frames built of solid 3/4 inch oak, maple or beech and rails joined by kiln-dried mortise and tenon joints, the door supports standard hinge layouts and repeated operation in busy kitchens. End panels with 3-ply construction and a 1/2 inch engineered wood core, plus solid wood hanging strips and toe kicks, create a coordinated Kitchen Kompact cabinet structure around this front. Use this Warmwood replacement door when the WW12X14 size and construction details align with your planned Kitchen Kompact cabinet run.
Sold In: 1 Each