Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood replacement door is a 21-1/2 inch wide by 22 inch high recessed panel door identified as WW22X21, so it matches the Warmwood style sizing for change-out work. The door uses a recessed panel layout, which keeps the look in line with existing Warmwood fronts when a damaged door needs to be swapped. All frames are built of solid 3/4 inch oak, maple or beech, so the door frame brings full-thickness hardwood to the job instead of thinner stock. Each rail is kiln-dried, which stabilizes the wood before assembly to support dimensional consistency on the hinge and handle edges. The rails are joined by mortise and tenon and then glued for added strength, so the corner joints are engineered for long-term service instead of light-duty use. This Warmwood door matches the Kitchen Kompact product class, which aligns with Kitchen Kompact cabinet runs already on site.
This Kitchen Kompact Warmwood replacement door is specified at 21-1/2 inches wide by 22 inches high, so it targets openings built around that original cabinet door size. The WW22X21 part number matches this dimension callout, giving installers a clear way to align ordering with field measurements. The door belongs to the Kitchen Kompact cabinet class, which keeps the construction logic consistent with existing Kitchen Kompact Warmwood runs during a repair or upgrade. Because the frame uses solid 3/4 inch hardwood, hinge-side edges present full material thickness for drilling or machining as required by the hinge layout. The recessed panel design ties in visually with Warmwood fronts, so a single-door replacement can blend with neighboring doors instead of drawing attention.
The Kitchen Kompact WW22X21 Warmwood door is intended for use on Kitchen Kompact kitchen cabinets that match the 21-1/2 inch by 22 inch door size, so it aligns with Warmwood cabinet runs needing a door replacement. Its recessed panel layout keeps the visual style in step with other recessed Warmwood fronts in the same room. Because the product falls under the Kitchen Kompact product class, it follows the same design approach found in matching wall and base cabinets from that line. All frames are built of solid 3/4 inch oak, maple or beech, so the door frame weight and feel line up with other Kitchen Kompact doors already hanging nearby. In kitchens using cabinets with 3-ply end panels and hardwood veneers, this Warmwood door maintains a coordinated face appearance when viewed from the front.
Each rail on this Warmwood recessed panel door is kiln-dried, joined by mortise and tenon, and then glued, so the frame resists twisting or loosening over years of cycles, which supports repeatable reveals along the cabinet face. The solid 3/4 inch hardwood frame gives hinge screws a thick, dense edge to bite into, helping hinges hold their setting instead of pulling out under door weight. Kitchen Kompact cabinets in this product class use solid wood hanging strips at the top and bottom, giving the cabinet box strong anchor points so this door works on a stable structure without sag from cabinet flex. Solid wood corner blocks in the cabinet construction are glued and power nailed, which stiffens the case and helps this replacement door open and close without the case shifting. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers in the cabinet line provide a stable base for alignment, so the WW22X21 door can be set to even gaps across the run.
The WW22X21 Warmwood replacement door is specified at 21-1/2 inches wide by 22 inches high, which targets cabinet openings designed around that original Kitchen Kompact Warmwood door size.
The Warmwood cabinet door frame is built of solid 3/4 inch oak, maple or beech, with kiln-dried rails joined by mortise and tenon and then glued, creating a strong, stable frame for everyday kitchen use.
The Warmwood door uses a recessed panel layout, so it visually aligns with other Kitchen Kompact Warmwood recessed panel fronts, helping a replacement door blend into the existing cabinet run.
The Kitchen Kompact product class means this Warmwood door follows the same construction approach as Kitchen Kompact cabinets, supporting consistent frame thickness, style, and cabinet integration.
Cabinets in this line use 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers, giving a stable, hardwood-faced case that visually coordinates with the Warmwood door.
This Warmwood door uses kiln-dried rails with mortise and tenon joints that are glued, which helps the frame resist movement and keeps door alignment more consistent over its service life.
The Kitchen Kompact Warmwood replacement door WW22X21 brings a recessed panel design and a solid 3/4 inch hardwood frame to 21-1/2 inch by 22 inch cabinet openings, aligning with Kitchen Kompact construction standards. When a Warmwood door in that size needs to be changed out, matching the WW22X21 part number and dimension callout keeps the new door consistent with the existing cabinet line. For runs built with solid wood hanging strips, corner blocks, and 3-ply end panels with hardwood veneers, this Warmwood door maintains both the structural feel and the front appearance of the original Kitchen Kompact installation.
Sold In: 1 Each