Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood replacement door gives you a matched recessed panel door sized 12-1/2 inches wide by 22 inches high for Kitchen Kompact kitchen projects, so damaged or missing doors can be swapped while keeping layout and reveals consistent. The door is identified as model WW22X12 and is part of the Kitchen Kompact Warmwood line, which keeps product selection straightforward when aligning with existing Warmwood fronts across a run of cabinets. All frames in this line are built of solid 3/4 inch oak, maple or beech, so the stiles and rails carry solid stock rather than a thin face layer, helping the door stand up to regular opening and closing in a busy kitchen. This Warmwood recessed panel style supports straightforward visual matching wherever the rest of the kitchen uses the same Kitchen Kompact series.
This Kitchen Kompact cabinet door carries a finished size of 12-1/2 inches wide by 22 inches high, giving installers a defined panel for narrow wall or base cabinet openings that share the Warmwood style. Using the WW22X12 size within a run of Kitchen Kompact cabinets lets hinge layout and reveal planning stay predictable from one opening to the next. Because the frame stock is solid 3/4 inch oak, maple or beech, there is sufficient material at the edges for typical routing, hinge boring, and minor trimming during installation while still keeping a robust perimeter around the recessed panel.
The WW22X12 cabinet door is part of the Kitchen Kompact category, so it is intended to sit within coordinated Kitchen Kompact kitchen layouts using the Warmwood recessed panel look. Its 12-1/2 inch width suits narrower openings often found near ranges, sinks, or end runs, allowing the same Warmwood face style to carry through those tighter cabinet bays. End panels built with 3-ply construction and a 1/2 inch engineered wood core with hardwood veneers give cabinet sides a stable surface next to the door edge, so reveals along tall and base runs remain visually even. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide a sturdy anchoring zone for the cabinet boxes, which supports accurate positioning of the WW22X12 door relative to neighboring fronts. Solid wood toe kicks at 3/4 inch thick create a rigid base line under base cabinets, so the doors above sit over a firm platform instead of a flexible lower edge.
All frames built of solid 3/4 inch oak, maple or beech give hinge screws and edge tooling solid fibers to bite into, which supports long-term alignment when doors are opened and closed throughout daily kitchen use. Each mortise-and-tenon rail joint, glued for added strength, locks the frame corners so they stay square, reducing the need to fight twisting or sagging when setting reveals and hinges. Kiln-dried rails help limit movement after installation, so once gaps between doors and cabinet faces are set, those clearances are less prone to seasonal change. Solid wood corner blocks, glued and power nailed, reinforce stress points where the frame sees torsion, helping the door hold its shape when handled from different edges over time. Across the broader Kitchen Kompact system, 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers keep side panels flatter, giving every WW22X12 Warmwood door a more consistent plane to close against in a bank of cabinets.
Kitchen Kompact Warmwood replacement door WW22X12 is 12-1/2 inches wide and 22 inches high, so it fits narrow cabinet openings in Kitchen Kompact layouts using this Warmwood style.
The Warmwood cabinet door frame is built of solid 3/4 inch oak, maple or beech, giving a hardwood perimeter that accepts hinges, machining, and daily use in kitchen installations.
The WW22X12 door rails are joined by mortise and tenon and then glued, creating a strong mechanical and adhesive joint that supports square, long-lasting corners under regular door operation.
The Warmwood door rails are kiln-dried, so moisture is controlled before assembly, helping reduce movement after installation and supporting more stable gaps between doors and cabinet faces.
The Warmwood door uses solid wood corner blocks that are glued and power nailed, reinforcing high-stress corners so the frame resists racking in everyday opening and closing.
Kitchen Kompact end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing flatter cabinet sides for more consistent Warmwood door alignment.
The Kitchen Kompact cabinet door 22 x 12-1/2 Warmwood recessed panel design, identified by part WW22X12, gives you a defined size and style when updating or repairing Kitchen Kompact runs. With solid 3/4 inch oak, maple or beech frames, kiln-dried rails, mortise-and-tenon joints, and reinforced corners, this Warmwood replacement door is built to work within the broader Kitchen Kompact system. For projects centered on maintaining a consistent Warmwood appearance across cabinets, this specific WW22X12 door aligns with the construction and sizing details used throughout the matching Kitchen Kompact line.
Sold In: 1 Each