Kitchen Kompact Warmwood replacement door defines a specific 17 inch wide by 12 inch high recessed panel door sized for matching Warmwood kitchen cabinetry. This fixed size gives installers a clear target for replacing a damaged or worn front while holding existing layout lines. The Kitchen Kompact branding ties the door directly to the Warmwood cabinet line, helping jobs stay visually consistent across a run of uppers or bases. The recessed panel style keeps the face profile aligned with other Warmwood fronts that use the same design language. For service work or partial remodels, this replacement approach avoids disturbing surrounding cabinets while restoring one opening. The Warmwood door identity also helps with ordering and job labeling, reducing mix-ups when multiple door styles are present in the shop or on the truck.
The 17 inch width on this Warmwood replacement door governs how it spans the cabinet opening and affects reveal against neighboring fronts. The 12 inch height supports use on shorter cabinets or upper rows where vertical spacing is tight. The recessed panel style keeps the center field lower than the surrounding frame, which influences hinge cup placement because the frame defines the drilling zone. The WW12X17 identifier links directly to this 17 by 12 inch format, helping installers match drawings, cut lists, and cabinet labels during layout and hanging. Using a door with these exact dimensions helps keep reveals and joint lines consistent when tying into existing Warmwood cabinetry.
This Warmwood door is defined as 17 inches wide and 12 inches high, placing it in the smaller door range often used on upper cabinets or compact sections. That fixed size helps installers maintain consistent vertical and horizontal lines in Warmwood runs where one front needs replacement. The recessed panel design keeps the face style aligned with other Warmwood recessed panel doors, which matters when only one or two fronts are swapped on a larger wall. The SAP description as a Warmwood door 12 x 17 reinforces its sizing role in cabinet layouts, tying directly to plan notes or cut lists that call out that dimension pair.
All frames in the Kitchen Kompact line are built of solid 3/4 inch oak, maple, or beech, so the structural pieces around Warmwood doors share that solid wood construction. This solid 3/4 inch frame helps the door resist racking during everyday use and supports stable hinge mounting. Each rail is kiln-dried, joined by mortise and tenon, and glued, creating tight, long-grain joints that hold alignment under door cycling. Solid wood corner blocks are glued and power nailed in the cabinet structure, adding rigidity that keeps openings square so the 12 by 17 door swings cleanly. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide firm anchoring points that help keep cabinet boxes stable, which supports reliable door clearances over time. End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, forming stable sides that resist movement and help keep the Warmwood door reveals consistent along the front of the run.
The Warmwood WW12X17 door is defined as 17 inches wide by 12 inches high, which sets its role for smaller cabinet openings and helps maintain consistent reveals in matching layouts.
The Kitchen Kompact Warmwood replacement door uses a recessed panel design, giving a framed appearance that aligns with other Warmwood recessed panel fronts in a cabinet run.
All frames are built of solid 3/4 inch oak, maple, or beech, so the supporting structure matches this Warmwood door and promotes stable door alignment at the cabinet face.
Each rail is kiln-dried and joined by mortise and tenon, then glued, creating strong joints that help keep the openings square for the 12 by 17 Warmwood door.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, stabilize the cabinet box so the Warmwood door operates along consistent reveals.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, supporting cabinet rigidity that helps the 17 by 12 door swing along a stable front plane.
The Kitchen Kompact Warmwood replacement door in the WW12X17 size gives a defined 17 inch by 12 inch recessed panel front for matching Warmwood cabinetry. The solid 3/4 inch frame construction used in the line supports dependable hinge mounting and door action. The precise part number and sizing simplify ordering for focused repairs or small layout changes within existing Warmwood kitchens. For projects that require keeping a matched look while addressing a single opening, this Warmwood recessed panel door provides a clearly specified solution ready to drop into the existing cabinet system.
Sold In: 1 Each