Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood replacement door gives you a recessed panel door sized for cabinet work at 18-1/2 inches wide by 22 inches high, so you can match existing Warmwood fronts on a specific opening without changing your cabinet layout. The door uses a Kitchen Kompact frame construction built from solid 3/4 inch oak, maple, or beech, which provides a substantial frame around the recessed panel and supports standard hinge boring and mounting operations. Each rail in the frame is kiln-dried, so movement from normal shop or home humidity is reduced compared to green stock, helping the door stay closer to size after installation. The rails are joined by a mortise and tenon joint and then glued, creating a mechanical and glued connection that keeps the corners tight in typical use. This Warmwood door follows the WW22X18 part sizing, tying directly to the Kitchen Kompact line.
The Kitchen Kompact cabinet system for this Warmwood replacement door relies on solid wood hanging strips positioned at both the top and bottom of wall and base cabinets, so the case stays anchored while you align the WW22X18 door to the opening. The recessed panel Warmwood door size of 18-1/2 inches wide by 22 inches high is intended to match the corresponding Kitchen Kompact Warmwood cabinet module, giving a consistent reveal pattern alongside other doors in the same run. Solid wood toe kicks at 3/4 inch thickness support the cabinet cases below the doors, which keeps the lower edge of the Warmwood door aligned with adjacent fronts in a straight run of bases. The 3 ply end panel construction with hardwood veneers maintains a true side surface next to the door opening, helping hinge and gap lines stay visually consistent across the cabinet bank.
The WW22X18 Warmwood door is identified as a Kitchen Kompact 18-1/2 inch wide by 22 inch high recessed panel replacement, so it is sized to suit Kitchen Kompact cabinets that follow this Warmwood module. Within the Kitchen Kompact line, solid wood hanging strips at the top and bottom of wall and base cabinets provide structural mounting points that define the opening, and this door fits into that framed opening to restore or build out a Warmwood layout. The solid 3/4 inch oak, maple, or beech frame around the recessed panel means the door edges have enough material to accommodate standard hinge cups and edge profiles used with Kitchen Kompact cabinet runs. Because the cabinet cases use 3 ply end panels with a 1/2 inch engineered core and hardwood veneers, the surfaces around the door opening present a stable, flat reference so the 18-1/2 by 22 inch Warmwood door can align visually with adjacent doors and drawer fronts.
The Warmwood door uses kiln-dried rails joined by mortise and tenon and then glued, so the primary joints are long-grain to long-grain and mechanically interlocked, which helps the door stay square after handling, finishing, and everyday cabinet use. Solid wood corner blocks that are glued and power nailed back up those joints at the corners, giving additional resistance to twist and racking when the cabinet is opened from one edge. The 3/4 inch solid wood frame stock in oak, maple, or beech provides consistent thickness for machining hinge cups or edge details without cutting into weak material, which aids repeatable hinge placement across multiple Warmwood doors. In the surrounding cabinet, solid wood toe kicks at 3/4 inch thickness and solid hanging strips positioned at the top and bottom work together to hold the case geometry, so reveals around the WW22X18 Warmwood recessed panel door stay more consistent along the run. The 3 ply end panel with 1/2 inch engineered core and hardwood veneers gives a dependable substrate near the hinge side, supporting screw holding where the door meets the case.
The Kitchen Kompact Warmwood replacement door is 18-1/2 inches wide by 22 inches high, so it matches cabinet openings built around that specific Warmwood module in the Kitchen Kompact line.
The Warmwood door frame is built from solid 3/4 inch oak, maple, or beech, providing substantial edge material for hinge machining and helping the frame hold fasteners securely in cabinet use.
The Kitchen Kompact Warmwood door rails are joined with mortise and tenon joints that are glued, creating a strong, interlocking corner that resists racking during everyday opening and closing.
Kitchen Kompact cabinets use solid wood hanging strips at the top and bottom to provide sturdy mounting points, which support the case so door openings for Warmwood fronts remain aligned.
The Kitchen Kompact end panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving a stable, flat side surface next to the Warmwood door opening.
The Warmwood door uses solid wood corner blocks that are glued and power nailed, backing up the frame joints so the door stays square and aligned during normal cabinet operation.
The Kitchen Kompact Warmwood replacement door in the WW22X18 size gives you an 18-1/2 inch by 22 inch recessed panel front that aligns with Kitchen Kompact cabinet construction, from solid 3/4 inch oak, maple, or beech frames to kiln-dried mortise and tenon joints. When paired with cabinets using solid wood hanging strips, 3/4 inch solid toe kicks, and 3 ply end panels with a 1/2 inch engineered core and hardwood veneers, this Warmwood door lets you continue or restore a consistent Kitchen Kompact Warmwood layout. Use this specific size and construction when the project calls for a Warmwood recessed panel door that matches the Kitchen Kompact system around it.
Sold In: 1 Each