Kitchen Kompact replacement door describes this Warmwood recessed panel door sized 18-1/2 inches wide by 27 inches high, so installers can match an existing opening and keep cabinet lines consistent across a run. The door carries Kitchen Kompact part number WW27X18, which ties it directly to the original Warmwood program for straightforward ordering and straightforward job documentation. All frames are built of solid 3/4 inch oak, maple, or beech, giving a solid-wood structure around the recessed panel that holds hinges firmly and supports repeated daily use. Each rail is kiln-dried, which stabilizes the wood in service and supports cleaner reveals between doors on finished installations. The rails are joined by mortise and tenon and then glued, creating a mechanically interlocked joint that resists racking when the door is opened and closed. This combination of solid hardwood frame and traditional joinery helps replacement doors blend into existing Kitchen Kompact Warmwood kitchens.
The Kitchen Kompact Warmwood replacement door is specified at 18-1/2 inches wide by 27 inches high, giving a defined door blank for builders who are matching an opening or a previous Kitchen Kompact layout. The recessed panel style sets the center panel back from the 3/4 inch solid hardwood frame, creating a framed profile that aligns with the Warmwood design while giving hinge screws a substantial edge distance. All frames are built of solid 3/4 inch oak, maple, or beech, so the door perimeter uses hardwood stock suited to machining, hinge boring, and edge adjustments on site. Each rail is kiln-dried, joined by mortise and tenon, and then glued, giving a joint structure that supports consistent alignment when doors are hung across multiple cabinets.
This Warmwood recessed panel door with 18-1/2 inch width and 27 inch height fits cabinet openings designed around the WW27X18 size, helping maintain uniform sightlines when replacing a single Kitchen Kompact front. The recessed panel layout pairs with a solid 3/4 inch hardwood frame, so the visual edge profile matches other Warmwood doors that use the same construction approach. All frames are built of solid oak, maple, or beech, giving shops flexibility to work with a hardwood edge that responds predictably to hinge boring, light planing, or sanding when dialing in reveals. The frame corners are supported by mortise and tenon joints that are glued, so the perimeter acts as a rigid rectangle that resists spreading or racking while the door is operating on wall or base units.
The Kitchen Kompact WW27X18 identifier links this Warmwood door directly to the manufacturers 27 inch by 18-1/2 inch door specification, helping installers track the part against drawings or prior orders on the same kitchen. Each rail is kiln-dried before being joined, so the hardwood frame begins from seasoned stock that is less prone to movement, supporting tight gaps between doors over time. Rails joined by mortise and tenon and then glued create long-grain contact inside the corners, which helps the door stay square and keeps hinge-side alignment steady after repeated use. The recessed panel is framed by the 3/4 inch solid hardwood, giving a substantial border that works well with standard hinge boring distances and provides material depth for adjustments along the edge during fit-up.
The Kitchen Kompact WW27X18 Warmwood door is 18-1/2 inches wide and 27 inches high, so it matches cabinet openings built around that door size in Kitchen Kompact layouts.
The Warmwood replacement door frame is built from solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and then glued, supporting a rigid, long-lasting frame.
The Warmwood door uses a recessed panel set inside a 3/4 inch solid hardwood frame, creating a framed center panel look that aligns with Kitchen Kompact Warmwood styling.
The kiln-dried rails on this Warmwood door start from stabilized hardwood, which supports straighter doors and more consistent reveals across cabinet runs after installation.
The WW27X18 part number identifies a Warmwood recessed panel door measuring 27 inches high by 18-1/2 inches wide, tying this door to a specific Kitchen Kompact size.
The Warmwood door frame is built of solid 3/4 inch oak, maple, or beech, giving a hardwood perimeter that supports hinge mounting and routine use in kitchen environments.
The Kitchen Kompact Warmwood replacement door WW27X18 pairs a recessed panel design with an 18-1/2 inch by 27 inch size, giving a direct route to match existing Warmwood fronts on service or expansion work. Solid 3/4 inch oak, maple, or beech frame construction with kiln-dried, mortise-and-tenon-joined rails supports dependable cabinet operation once hung. For projects built around Kitchen Kompact Warmwood, this identified WW27X18 door provides a clearly defined component that helps maintain consistent sizing and styling across the kitchen.
Sold In: 1 Each