Kitchen Kompact Warmwood replacement door gives you a 14 inch wide by 27 inch high recessed panel door matched to the Warmwood door style, so you can swap a damaged front or add a new cabinet opening while keeping a consistent look across the run. The door is part of the Kitchen Kompact cabinet line, which uses solid 3/4 inch oak, maple, or beech for all frames, so the frame construction supports everyday cabinet use in a typical kitchen environment. Each rail in the frame is kiln-dried, joined by mortise and tenon, and then glued, creating a stable joint that helps the door stay square during installation and use. That kiln-dried, mortise-and-tenon, glued construction resists movement at the corners, which matters when you are aligning hinges and setting even reveals on a replacement.
The Kitchen Kompact 14 inch wide by 27 inch high Warmwood recessed panel door size ties directly to typical Kitchen Kompact cabinet layouts, which helps when replacing a single front in an existing run. Because all frames in the line are solid 3/4 inch oak, maple, or beech, hinge screws engage consistent material, supporting repeatable mounting torque when you hang this door. The kiln-dried, mortise-and-tenon, glued rail construction keeps the frame joints tight, which helps you hold even gaps between this replacement and neighboring doors. With cabinet boxes built around solid wood hanging strips and 3 ply hardwood veneer end panels, the structure behind the Warmwood door stays stable, which supports long-term alignment after installation.
The Kitchen Kompact Warmwood replacement door, identified by manufacturer part number WW27X14, is sized at 14 inches wide by 27 inches high and configured with a recessed panel, so it fits Warmwood-style cabinet openings that match those dimensions. Because the Warmwood line uses solid 3/4 inch oak, maple, or beech for all frames, this door works in cabinet runs that share that same Kitchen Kompact construction, supporting a uniform face across base and wall units. Cabinet boxes in the system rely on solid wood hanging strips located at the top and bottom of wall and base cabinets, giving a solid backbone that supports this door when you swing it open or closed. End panels built from 3 ply, 1/2 inch thick engineered wood core with hardwood veneers keep the cabinet sides flat, which helps this Warmwood recessed panel door sit properly in the face frame opening with consistent reveals.
Because each rail in the Kitchen Kompact frame is kiln-dried, then joined using mortise and tenon joints and glued, the WW27X14 Warmwood door resists twisting at the corners, which is important when you are aligning it to existing fronts. Solid wood corner blocks in the cabinets are glued and power nailed, tying the face frame, toe kicks, and hanging strips together so the structure supporting the Warmwood recessed panel door stays rigid under daily use. Solid wood toe kicks at 3/4 inch thick visually coordinate with the 3/4 inch solid frame on this replacement door, helping finished cabinet banks look consistent from floor to top. The 3 ply end panels, with a 1/2 inch thick engineered wood core and hardwood veneers, reduce side-panel deflection, which supports long-term hinge alignment and helps this 14 inch by 27 inch Warmwood door continue to close cleanly against the cabinet.
The Kitchen Kompact Warmwood WW27X14 replacement door is 14 inches wide by 27 inches high, so it matches cabinet openings designed around that specific door size.
The Warmwood replacement door uses a solid 3/4 inch oak, maple, or beech frame with kiln-dried rails joined by mortise and tenon and glued, which supports a stable, square door.
The kiln-dried, mortise-and-tenon, glued joints keep the Warmwood door frame rigid, which helps maintain even gaps and accurate hinge alignment during cabinet door replacement.
Kitchen Kompact cabinets use solid wood corner blocks, solid wood toe kicks, and solid wood hanging strips, creating a rigid box that supports the Warmwood recessed panel door.
End panels with 3 ply construction and a 1/2 inch engineered wood core with hardwood veneers help cabinet sides stay flat, supporting consistent alignment of the Warmwood door.
This 14 inch by 27 inch recessed panel door is part of the Kitchen Kompact Warmwood cabinet line, tying into the same solid wood frame and cabinet construction details.
The Kitchen Kompact Warmwood replacement door in the 14 inch by 27 inch WW27X14 size gives you a recessed panel front that matches the Warmwood cabinet construction, so you can handle repairs or layout changes without changing the overall cabinet style. With solid 3/4 inch oak, maple, or beech frames, kiln-dried mortise-and-tenon glued joints, and supporting cabinet components like solid wood corner blocks, toe kicks, hanging strips, and 3 ply hardwood veneer end panels, the system is built around stable, solid wood construction. Use this Warmwood door when you need a replacement front that aligns with existing Kitchen Kompact cabinet boxes and supports straightforward hinge mounting and door alignment.
Sold In: 1 Each