Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood replacement door gives you a 9-1/2 inch wide by 27 inch high recessed panel door sized for Warmwood cabinet layouts, so you can match an existing run or finish a new cabinet line with consistent proportions. The door uses a recessed panel design, which creates a defined frame around the center panel, helping your cabinet fronts read clean and uniform across a kitchen wall. All frames are built of solid 3/4 inch oak, maple or beech, so the door frame carries the load on its own timber rather than on a thin composite, which supports long-term alignment in everyday use. Working with solid 3/4 inch stock also gives installers familiar material thickness for boring hinge cups or edge drilling, which keeps hinge placement and adjustments predictable from job to job.
This Warmwood recessed panel door at 27 inches high and 9-1/2 inches wide gives installers a defined footprint to work from, so hinge layout and overlay planning can be calculated around known dimensions instead of field-measured approximations. The frame uses solid 3/4 inch oak, maple or beech members joined by mortise and tenon and then glued, so screw-holding for hinges occurs in hardwood rather than a thin veneer, which supports firm hinge mounting. Kiln-dried rails resist movement from moisture swings better than green stock, which helps the door maintain a flat swing path once hung. Solid wood corner blocks, glued and power nailed, further stiffen the frame, so when you are adjusting hinges to fine-tune reveals, the frame itself remains stable and responds predictably to small adjustments.
The WARMWOOD DOOR 27 X 9 1/2 designation and 9-1/2 inch width x 27 inch height sizing place this door directly in the Warmwood cabinet system, so it slots into layouts that call for that exact opening size. The recessed panel style matches other recessed fronts from Kitchen Kompact, letting you maintain the same door profile across base or wall cabinets that share the Warmwood look. Because the frame is solid 3/4 inch oak, maple or beech, the edge thickness suits standard concealed hinge cup boring, so you can use your normal hinge line and boring distances when fitting this door into an existing run. The solid frame also gives you enough material for hinge screw bite on both wall and base cabinet applications where this size is used.
The manufacturer part number WW27X9 and the SAP description WARMWOOD DOOR 27 X 9 1/2 tie the physical door directly to documentation, so when you specify or reorder, you can call out this size confidently, reducing mix-ups between similar sizes. Mortise and tenon joinery at the rails, combined with kiln-dried stock and glued joints, creates a frame that keeps joints tight, so hinge-side corners stay firm when doors are opened repeatedly. Solid wood corner blocks that are glued and power nailed back up those joints, giving the frame more resistance to twisting during transport, hanging, and everyday use. With all frames built of solid 3/4 inch oak, maple or beech, you are working with predictable hardwood density for boring, sanding, and edge work, which supports clean machining and consistent finishing across multiple doors on the same job.
The Kitchen Kompact WW27X9 Warmwood door is 9-1/2 inches wide and 27 inches high, so it suits cabinet openings designed around that specific Warmwood size.
The Warmwood door frame is built of solid 3/4 inch oak, maple or beech, giving a hardwood frame that supports hinge boring and screw-holding in solid stock.
The WW27X9 frame uses kiln-dried rails joined by mortise and tenon and then glued, so the corners lock together to handle typical cabinet door use.
The recessed panel design places structural strength in the solid 3/4 inch frame, so hinge loads act mainly on the frame, helping the door stay square when mounted.
The solid wood corner blocks are glued and power nailed, adding bracing at each corner so the frame resists racking under everyday opening and closing.
The WW27X9 part number and WARMWOOD DOOR 27 X 9 1/2 description identify this exact size, simplifying ordering the same Warmwood door for future projects.
The Kitchen Kompact Warmwood replacement door at 9-1/2 inches wide by 27 inches high, identified as WW27X9 and WARMWOOD DOOR 27 X 9 1/2, gives you a known size tied to the Warmwood line. With all frames built of solid 3/4 inch oak, maple or beech, kiln-dried mortise and tenon rails, and solid wood corner blocks that are glued and power nailed, the door is built around a hardwood frame that supports hinge mounting and everyday operation. For cabinet runs using this Warmwood size, choosing this recessed panel door lets you match dimensions and framing style across the project.
Sold In: 1 Each