Kitchen Kompact Warmwood replacement door is a recessed panel cabinet door sized 21-1/2 inches wide by 18 inches high, so it matches the WW18X21 Warmwood door opening and keeps dimensions consistent on existing Kitchen Kompact layouts. The door uses a recessed panel design, which maintains the original style of Kitchen Kompact Warmwood cabinetry for visual continuity across a run of cabinets. All frames are built of solid 3/4 inch oak, maple, or beech, giving the door a solid wood frame structure that supports everyday cabinet use in a kitchen environment. This solid 3/4 inch construction helps the frame resist twisting during normal opening and closing cycles, which matters when aligning doors across multiple cabinets. The product is identified by manufacturer part number WW18X21 and SAP description Warmwood door 18 x 21 1/2, which ties the size and Warmwood finish directly to Kitchen Kompact specifications for replacement work.
The Warmwood replacement door is specified as 21-1/2 inches wide by 18 inches high, allowing it to match openings built to the WW18X21 Kitchen Kompact standard so hinge layout and reveals can be planned around known dimensions. All frames use solid 3/4 inch oak, maple, or beech, giving consistent frame thickness that works predictably with typical hinge cup and screw positions on Kitchen Kompact cabinets. Kiln-dried, mortise and tenon joined, and glued rails create a rigid frame corner, which helps hold door alignment once hinges are set. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give the cabinet structure firm mounting points that support the door hanging plane.
The Kitchen Kompact Warmwood door with manufacturer part number WW18X21 is identified as a Warmwood door 18 x 21 1/2, so it is intended to match cabinet sections built to that opening size within the Kitchen Kompact system. The recessed panel design aligns with Kitchen Kompact cabinet styling, helping installers keep a consistent look across upper or base cabinet runs that already use Warmwood recessed panel fronts. All frames are built of solid 3/4 inch oak, maple, or beech, so the door integrates with other Kitchen Kompact components that rely on the same frame thickness and material strength. Solid wood toe kicks at 3/4 inch thick and 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers create a coordinated cabinet structure around the door location, supporting visual alignment from door edge to cabinet end. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, define stable mounting lines so door placement can be referenced to a rigid cabinet body.
Each rail on the Warmwood replacement door is kiln-dried, joined by mortise and tenon, and then glued, giving installers a door frame that holds its geometry when adjusted to neighboring fronts. This joint construction helps keep the stiles and rails square, which matters for maintaining even gaps and clean sight lines when replacing a single door within an existing Kitchen Kompact Warmwood run. Solid wood corner blocks that are glued and power nailed reinforce cabinet corners near the door area, so hinge side loads transfer into a robust cabinet box during daily operation. End panels with 3-ply construction and a 1/2 inch engineered wood core with hardwood veneers add dimensional stability along the cabinet side, which helps doors stay aligned relative to the case over time. The consistent 3/4 inch solid wood frame thickness works with industry-standard hinge setups on Kitchen Kompact cabinets, supporting repeatable adjustments without the frame compressing under hardware pressure.
The Kitchen Kompact Warmwood replacement door is specified as 21-1/2 inches wide by 18 inches high, so it matches cabinet openings designed around the WW18X21 size standard.
The Warmwood replacement door frame is built of solid 3/4 inch oak, maple, or beech, giving a solid wood structure that supports everyday cabinet door use in kitchen installations.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, producing a stable corner joint that helps the door stay square for consistent reveals and hinge alignment.
Manufacturer part number WW18X21 and SAP description Warmwood door 18 x 21 1/2 tie the Warmwood finish and 21-1/2 by 18 inch size directly to Kitchen Kompact replacement layouts.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give a rigid mounting base that supports consistent door positioning along the cabinet run.
End panels with 3-ply construction and a 1/2 inch engineered wood core with hardwood veneers provide a stable cabinet side, helping adjacent doors maintain alignment over time.
The Kitchen Kompact Warmwood replacement door in size 21-1/2 inches wide by 18 inches high provides a direct match to WW18X21 Warmwood cabinet openings, so it fits established Kitchen Kompact dimensions during service or remodeling work. Its solid 3/4 inch oak, maple, or beech frame, kiln-dried mortise and tenon joined rails, and recessed panel design keep the door in line with existing Kitchen Kompact construction and style. For projects centered on Warmwood recessed panel cabinets, choosing this WW18X21 door keeps sizing, structure, and appearance consistent across replacements or added sections.
Sold In: 1 Each