Salice Progressa+ 24" Push-to-Open Full Extension 170 lb Undermount Drawer Slide, Zinc, G7U9P610CXF2

24 Inch Undermount Drawer Slide For Handle-Less, Heavy-Load Applications

The Salice Progressa+ is a 24 inch, full-extension concealed undermount slide with mechanical push-to-open, designed for frameless cabinets and drawer boxes built with 3/4 inch sides. At 170 lb per pair, it covers the heavy end of residential and commercial drawer work where a handle-less front and a high load rating are both required.

Key Features

• Push-to-open mechanism ejects the drawer with a light press on the handle-less front, so pulls and knobs stay off the design entirely.
• Full extension brings the entire 24 inch drawer out to the cabinet face for complete access to the back of the box.
• 170 lb capacity per pair places this slide well above the standard 90 to 110 lb undermount range, making it viable for heavy pantry and utility drawers.
• 3/4 inch (19mm) drawer side thickness compatibility makes it the right fit for shops building boxes from thick plywood or hardwood stock.
• Fully concealed beneath the drawer box so the slide hardware disappears when the drawer is open.
• Steel construction with zinc finish for lasting indoor service.

Where This Slide Fits the Job

The 24 inch length and 170 lb capacity combination makes this slide a practical choice for base cabinet drawers that carry real weight: deep pots-and-pans drawers, file drawers loaded with hanging folders, or utility pulls stocked with tools and supplies. The push-to-open mechanism is the deciding factor for contemporary handle-less kitchen and bath designs, where every front is clean and uninterrupted. This is a frameless-only slide, so it belongs in European-style casework where the slide mounts directly to the cabinet side panel without a face frame in the way.

Build and Finish

The Progressa+ is manufactured from steel with a zinc finish, the standard corrosion-resistant coating for indoor cabinetry hardware. Because the slide is concealed beneath the drawer box, the finish is functional rather than decorative. The slide is engineered for drawer boxes with sides up to 3/4 inch (19mm) thick. Build the box to Salice's published specification for the Progressa+ series, including the correct box width, bottom recess, rear notch, and the drilling positions for the Salice series-specific front fixing clips. The push-to-open trigger requires the front panel to have the specified gap so the mechanism can travel; a front set too tight against the cabinet face will not actuate reliably.

Who Orders This Slide

Cabinet shops running handle-less frameless kitchens reach for this slide when the box is built from 3/4 inch material and the drawer needs to carry more than a standard undermount can hold. Designers specifying deep pantry pulls or heavy utility drawers in a handleless scheme get the 170 lb rating and full extension in one concealed package. Contractors finishing commercial or high-end residential installs find the 24 inch length the right fit for standard base-cabinet depth drawers that demand both strength and a clean front profile.

Full Capacity, Clean Front, No Compromises

When the design calls for a handle-less front, a 24 inch deep drawer, and load capacity well above the standard undermount range, the Salice Progressa+ push-to-open slide fills all three requirements from a single, concealed pair.