Salice Progressa+ 30" Push-to-Open Full Extension 170 lb Undermount Drawer Slide, Zinc, G7U9P762CXF2

Zinc Undermount Slide For Heavy Handle-Less Drawers

The Salice Progressa+ 30 inch push-to-open undermount drawer slide delivers concealed, full-extension travel and a mechanical touch-release opening in a frameless cabinet application — all rated at 170 lb per pair, making it one of the highest-capacity options in this slide class.

Key Features

• Push-to-open mechanism ejects the drawer with a light press on a handle-less front, no pulls or knobs required.
• Full extension brings the entire 30 inch drawer out to the cabinet face for unobstructed access to the back of the box.
• 170 lb capacity per pair handles oversize and heavily loaded drawers that standard undermounts cannot.
• Made for 3/4 inch drawer sides — engineered around 19mm material so the spacing, box-width formula, and locking devices align to that thickness.
• Frameless cabinet installation — mounts directly to the flat interior side panel for clean European-style casework.
• Steel construction with zinc finish for reliable indoor service in a fully concealed position beneath the drawer box.

Where This Slide Fits the Work

A 30 inch slide in the push-to-open configuration suits drawer runs that are both long and heavy: deep pots-and-pans drawers, wide base-cabinet drawers in modern handle-less kitchens, and utility pull-outs where the front doubles as the only grip point. The 170 lb per-pair rating means this slide covers the application categories — full bins, stacked pans, and loaded utility boxes — where a standard 90 to 100 lb undermount runs out of headroom before the job does. The frameless mount drops straight onto the cabinet side panel, making it the right fit for production shops running European-style boxes on the 32mm system as well as custom builders doing contemporary handle-less work.

This is a mechanical push-to-open slide: the drawer opens with a press and closes without a damper. For installations where a silent, damped close is the priority alongside touch-opening, that calls for a combined push-to-open and soft-close model rather than this one.

Construction and Finish

The Progressa+ is built from steel with a zinc finish — a functional protective coating suited to the indoor, concealed position an undermount occupies beneath the drawer box. Because the slide sits completely hidden when the drawer is open, the zinc finish serves durability rather than appearance. The slide is engineered specifically for 3/4 inch (19mm) drawer sides; the box-width formula, rear notch, and locking-device drilling all correspond to that material thickness. Build the drawer box to the Salice Progressa+ specification for the series — nominal 30 inch length, correct width for the side clearance, bottom recess, rear notch, and locking-device holes. Salice fixing clips are series-specific and do not interchange with other brands or Salice lines.

Who Orders This Slide

Production cabinet shops building handle-less frameless kitchens reach for this slide when the box is deep, the load is real, and the front needs to open without hardware. At 30 inches it also suits furniture makers building deep blanket chests, media consoles, and workshop storage on a European frameless box. Designers specifying handle-less modern cabinetry can call this slide with confidence when the drawer side material is 3/4 inch and the cabinet construction is frameless — those two parameters define exactly which version to order and this SKU satisfies both.

Frequently Asked Questions

The Right Slide for Handle-Less, High-Capacity Frameless Work

When the drawer is deep, the load is heavy, and the front has no hardware, the Salice Progressa+ 30 inch push-to-open slide delivers the capacity, extension, and touch-release convenience the job calls for — ordered as one pair per drawer, built to spec, and installed in frameless cabinets with 3/4 inch drawer sides.