Salice Progressa+ 27" Push-to-Open Full Extension 170 lb Undermount Drawer Slide, Zinc, G7U9P686CXF2

Undermount Slide For Heavy Drawers With Handle-Less Fronts

The Salice Progressa+ 27 inch push-to-open undermount drawer slide is a concealed, full-extension runner built for frameless cabinets where drawer fronts carry no hardware. Rated 170 lb per pair and designed around 3/4 inch (19mm) drawer sides, it covers the demanding end of the undermount market: deep, heavily loaded drawers in modern handle-less kitchens and utility applications.

Key Features

• Push-to-open mechanism ejects the drawer with a light press on the handle-less front, no pulls or knobs required.
• Full extension brings the entire 27 inch drawer box out to the cabinet face for complete access to the back.
• 170 lb capacity per pair puts this slide well into heavy-duty territory, suited to oversize and densely loaded drawers.
• 3/4 inch (19mm) drawer side compatibility makes it the right choice for boxes built from thick hardwood or plywood stock.
• Fully concealed installation keeps all hardware hidden beneath the drawer box when the drawer is open.
• Steel construction with zinc finish provides lasting indoor durability in a functional, cabinet-matched profile.

Where This Slide Earns Its Keep

At 27 inches, this runner suits deep base cabinets where a pots-and-pans drawer, a file pull-out, or a pantry insert runs the full depth of the box. The push-to-open mechanism is the right answer for handle-less slab fronts on modern frameless casework — no cutout, no pull, just a press. With 170 lb of rated capacity per pair, the slide handles the kind of load that standard 90 to 100 lb undermounts are not designed for: dense cookware, stacked file folders, or a heavily stocked pantry tray. The 27 inch length also gives installers room to build a drawer box deep enough to reach the back of a full-depth base cabinet without losing travel.

Build and Finish

The Progressa+ is made from steel with a zinc finish — a functional, durable combination for years of indoor service. Because the slide mounts beneath the drawer box and stays hidden in use, the finish serves protection rather than appearance. The 3/4 inch side-thickness version is a distinct model from the 5/8 inch version; the two are not interchangeable, and the box width formula, locking device drilling, and rear notch all follow the 19mm specification. Build the drawer box to Salice's published Progressa+ specification for this series before installation.

Who Should Order This

Cabinet shops running thick-sided drawer boxes on handle-less frameless work will find the Progressa+ 27 inch push-to-open a direct fit. It is also a strong choice for designers specifying seamless fronts in modern kitchens or utility rooms, and for contractors sourcing slides for deep base cabinets where the load exceeds what standard-capacity undermounts can support. This SKU is the frameless version; the cabinet sides must be flat and accessible for direct mounting — there is no face-frame configuration in this model.

Frequently Asked Questions

The Right Slide for Deep, Handle-Less, Heavy Work

Pair the Salice Progressa+ 27 inch push-to-open with a 3/4 inch drawer box built to spec and a frameless cabinet, and the result is a clean, hardware-free front that handles serious loads without compromise.