Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 35-7/16" - 47-1/4", 4-Slides, Further Door Retraction, - ALT-ST15-D10L-19

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a pocket door hardware system designed for overlay doors, so it supports cabinet projects where the door needs to sit over the face frame or case edge. The kit is specified as an overlay pocket door system with door alignment adjustability, which allows fine-tuning of the overlay door position so reveals can line up cleanly across a run. It is rated for a minimum cabinet depth of 19-1/2 inches, so it suits deeper multimedia or storage cabinets built to that depth or greater. The door height range of 35-7/16 inches to 47-1/4 inches means it is aimed at mid-height doors, which are common in entertainment, office, or utility cabinets. The system is classified under pocket door slides in pocket door hardware, so it is intended to carry the sliding motion and retraction for a single overlay pocket door project.

Overlay Pocket Door Features That Support Workflow

• The overlay pocket door system provides door alignment adjustability, which lets installers correct minor racking or reveal variations so the finished door looks square and consistent with adjacent fronts.
• Overlay amount is specified as up to 3/8 inch (10 mm), giving a clear target when laying out the door size relative to the cabinet opening so the overlay relationship matches design expectations.
• The system uses four slides, which distributes the door movement across multiple slide members so the pocket action supports the door through its travel in and out of the cabinet.
• A synchronized board is part of the kit description, coordinating slide motion so both sides of the door travel together and helping reduce binding during open and close cycles.
• The overlay damper unit has an adjustment screw, so the closing action can be tuned at the damper to better match the door weight and application.

Installation And Fit Details For Cabinet Builds

The minimum cabinet depth of 19-1/2 inches sets the basic case dimension needed so the pocket door can fully retract into the cabinet without interfering with stored items. The stated door height range of 35-7/16 inches to 47-1/4 inches indicates where the geometry of the pocket door slides and synchronized board is engineered to operate, so doors sized within that band align with the hardware layout. The overlay amount of up to 3/8 inch (10 mm) guides the relationship between door size and opening size, which simplifies planning for overlay across different cabinet runs. The overlay damper unit with adjustment screw provides a defined adjustment point during installation, so the installer can use that screw to refine the damping effect after the door is hung.

Using This Pocket Door Kit In Real Projects

Where This Overlay Pocket Door System Fits Best

This pocket door hardware is identified as an overlay pocket door system with further door retraction capability than the ALTST20-D10 series, so it is intended for applications where the door needs to clear the front plane more completely. The fittings allow the door to retract further into the cabinet than that reference series, which helps when equipment, drawers, or work surfaces sit near the opening and require maximum access. The door height specification of 35-7/16 inches to 47-1/4 inches supports medium-height cabinet doors often used on multimedia, workspace, or storage cabinets. Being in the pocket door slides category under pocket door hardware, it is suited to installations where a clean front is desired when the door is open, with the door stored inside the cabinet.

Details That Help Achieve Consistent Door Motion

The use of four slides in the Sugatsune overlay pocket door kit distributes movement and support points across the door edges, which promotes smoother tracking through repeated open and close cycles. The synchronized board described for this system coordinates the slide action from side to side, so both sides of the door travel together and help reduce twisting. Door alignment adjustability built into the overlay pocket door system lets installers fine-tune the door plane after mounting, which supports even gaps and reduces the likelihood of the door rubbing against the case. The overlay amount of up to 3/8 inch (10 mm) defines the overlay target, giving a consistent reference when building or ordering doors to suit this hardware. The overlay damper unit with an adjustment screw gives a defined point for setting the damping effect, so the closing motion can be moderated to better suit the specific door weight and cabinet use.

Common Questions About This Pocket Door Hardware

Select This Overlay Pocket Door Kit For Your Next Build

The Sugatsune overlay pocket door kit with manufacturer part number ALT-ST15-D10L-19 provides an overlay pocket door system configured for a 19-1/2 inch minimum cabinet depth and doors between 35-7/16 inches and 47-1/4 inches high. Its door alignment adjustability, overlay range up to 3/8 inch, four-slide layout, synchronized board, and overlay damper unit with adjustment screw are all specified to support an overlay pocket door that retracts further into the cabinet than the ALTST20-D10 series. For cabinet projects that match these dimensions and call for an overlay pocket door solution, this hardware set offers a defined set of working parameters.