Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware system designed for overlay cabinet doors using the ALT-ST15-D10L-28 configuration. It is classified as pocket door hardware, so it serves as the working mechanism that lets a cabinet door slide back into the case instead of swinging out into the room. The minimum cabinet depth is 28-9/16 inches, which sets a clear case depth requirement for planning carcass construction and layout. The system is designed for door heights from 35-7/16 inches to 47-1/4 inches, so it targets medium-height doors often used in multimedia, closet, and workspace cabinetry. The kit is built around pocket door slides and related components, giving installers a matched setup from one manufacturer for smoother layout and predictable motion in overlay applications.
This overlay pocket door system is intended for cabinets meeting the 28-9/16 inch minimum depth, so case construction needs to respect that depth to give the slides full travel. The specified door height range from 35-7/16 inches to 47-1/4 inches defines where this system belongs in a project lineup, allowing installers to match the hardware to mid-height doors and avoid guesswork on suitability. The four-slide configuration works with the synchronized board and hinges as a coordinated mechanism, which simplifies layout because the motion path is engineered as a single system. Door alignment adjustability is built into the overlay pocket door system, helping installers dial in final reveals after mounting without reshaping the cabinet.
This pocket door hardware kit is categorized under shelf, closet, and garage organization as well as multimedia and workspace components, so it targets storage and equipment cabinets where a sliding, retracting door is preferred over a swinging door. The overlay design suits applications where the door overlays the cabinet front and then retracts into the interior cavity on the four-slide mechanism. The fittings are specified to retract the door further into the cabinet than the ALTST20-D10 series, which benefits multimedia and workspace cabinets that need more open access at the front for equipment, shelves, or work surfaces. With a minimum cabinet depth of 28-9/16 inches and a door height range of 35-7/16 inches to 47-1/4 inches, the system fits medium-depth, mid-height cabinets commonly used in organizing and workspace layouts.
The overlay amount of up to 3/8 inch, or 10 mm, supports overlay styling in face-framed or frameless cabinetry where a controlled overlap of the door on the case front is part of the design. Because the system is sold as a pocket door kit under part number ALT-ST15-D10L-28, installers can reference a single product identity when standardizing hardware choices across similar cabinets in a project that share door size and depth requirements.
Door alignment adjustability in the overlay pocket door system allows fine tuning after installation, which helps create even reveals and proper overlay around the opening so doors look straight and track smoothly. The overlay amount up to 3/8 inch, or 10 mm, clearly defines the design envelope, guiding door sizing and cabinet front layout to avoid interference between adjacent fronts. The overlay damper unit with an adjustment screw lets tradespeople tailor the damping response, so the door transition into or out of the pocket feels controlled and reduces impact on hinges and slides.
The fittings that retract the door further into the cabinet than the ALTST20-D10 series provide more clearance at the front of the cabinet, improving access to stored items or electronics when the door is parked. The coordinated use of four slides with a synchronized board and hinges connects sliding and pivoting movements into one system, which simplifies planning because the components are engineered to work together. Brand identification as Sugatsune America and classification as pocket door hardware give installers a clear source and product class when matching future projects to this same function and performance envelope.
The ALT-ST15-D10L-28 pocket door kit is specified for a minimum cabinet depth of 28-9/16 inches, which sets the case depth needed for full travel and proper pocket door retraction.
This overlay pocket door system is designed for door heights from 35-7/16 inches to 47-1/4 inches, aligning it with mid-height cabinet doors typically used in organization and multimedia applications.
The Sugatsune overlay pocket door kit supports an overlay amount of up to 3/8 inch, or 10 mm, which determines how far the door overlaps the cabinet front in the closed position.
The door alignment adjustability on this overlay pocket door system lets installers fine-tune door position after mounting so reveals and overlays line up cleanly with the cabinet front.
The overlay damper unit with an adjustment screw allows control of damping force, so door movement into and out of the pocket feels smoother and impacts on the cabinet are moderated.
This overlay pocket door system uses fittings that retract the door further into the cabinet than the ALTST20-D10 series, providing increased opening clearance at the cabinet front.
The Sugatsune overlay pocket door kit ALT-ST15-D10L-28 is designed as a complete pocket door hardware solution for overlay doors on cabinets with at least 28-9/16 inches of depth and door heights from 35-7/16 inches to 47-1/4 inches. With door alignment adjustability, an overlay amount up to 3/8 inch, and fittings that retract the door further into the cabinet than the ALTST20-D10 series, it provides clear design parameters for cabinet and door sizing. When a project calls for a retracting overlay door in shelf, closet, garage, multimedia, or workspace cabinets, this pocket door system gives a defined set of dimensions and functions to align with the casework design.
