Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 22-1/2", Door Height 47-1/4" - 63", 4-Slides, Further Door Retraction, - ALT-ST15-D10LL-22
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware set from Sugatsune America designed for cabinet applications where doors slide back into the cabinet. The system is specified for a minimum cabinet depth of 22-1/2 inches, so it suits deeper casework that needs doors to clear equipment or interiors. The door height range of 47-1/4 inches to 63 inches matches mid-height doors often used on multimedia or workspace cabinets, keeping this kit focused on that door size range. The pocket door system is supplied as pocket door hardware in the pocket door slides category, so it functions as a complete pocket door mechanism for overlay doors. The manufacturer part number ALT-ST15-D10LL-22 identifies this specific configuration for ordering and repeat jobs.
Key Pocket Door Details That Support Workflow
- The overlay pocket door system provides door alignment adjustability, which lets the installer fine-tune door position so vertical and horizontal gaps around the overlay door look even on finished cabinetry.
- The overlay amount is up to 3/8 inch, or 10 mm, so the door overlays the cabinet face by that distance, which helps coordinate with surrounding fronts designed for this overlay dimension.
- The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, giving more clearance at the front, which is useful when space in front of the cabinet is tight during use.
- The system uses four slides, so the door movement is guided at multiple points, which supports smoother travel and better load distribution along the pocket door path.
- An overlay damper unit with an adjustment screw is part of the system, which lets the installer adjust the damping action so the closing feel of the door can be tuned on site.
Overlay Pocket Door Fit And Adjustment Details
The overlay pocket door system is built for applications using a minimum cabinet depth of 22-1/2 inches, so case depth planning needs to match that dimension for the slides and retraction path. The specified door height range of 47-1/4 inches to 63 inches means door panels in that band fall within the operating design of the system. Door alignment adjustability in the overlay pocket door system gives room to correct minor construction variances so reveals can be brought into line. The overlay amount of up to 3/8 inch defines how far the door face sits past the cabinet edge, which helps coordinate with other fronts in the same run that follow a 3/8 inch overlay layout.
Using This Overlay Pocket Door Hardware On Projects
Where This Overlay Pocket Door System Fits Best
The pocket door hardware is classified as pocket door slides within shelf, closet and garage organization, and multimedia and workspace components, so it suits cabinets in those environments that need doors to clear the opening. The further door retraction compared with the ALTST20-D10 series means the panel moves deeper into the cabinet, which helps when equipment or work surfaces in front of the cabinet require full access without a projecting door. The specified door height window of 47-1/4 inches to 63 inches targets medium-height doors, which are common on upper multimedia cabinets, closets, or workspace units. The overlay pocket door system works with an overlay amount up to 3/8 inch, aligning it with layouts that use this overlay for visual continuity across a bank of doors.
Details That Support Consistent Door Movement And Alignment
The overlay pocket door system with door alignment adjustability helps refine final fit so the installed doors line up cleanly with adjacent fronts. Four slides in the kit guide the door, which distributes movement across multiple tracks and supports stable sliding into and out of the cabinet. The synchronized board in the system coordinates slide motion, helping the door travel in a controlled way throughout its path. The overlay damper unit with an adjustment screw lets the installer tailor how the door cushions at the end of travel, which can improve perceived quality of movement in daily use. Hinges and hinge mounting plates in the kit establish the pivot connection, supporting reliable opening before the door transitions onto the slide system. The ALT-ST15-D10LL-22 designation identifies this configuration for repeatable specification when the same motion and dimensions are required on multiple cabinets.
Common Questions About This Pocket Door System
What cabinet depth is this pocket door kit designed for?
The overlay pocket door system is specified for a minimum cabinet depth of 22-1/2 inches, which lets the slides and further door retraction function within the designed travel path.
What door height range works with the ALT-ST15-D10LL-22 kit?
The ALT-ST15-D10LL-22 pocket door hardware is designed for door heights from 47-1/4 inches to 63 inches, matching typical medium-height cabinet doors in multimedia or workspace applications.
How much overlay does this pocket door system support?
The overlay pocket door system supports an overlay amount up to 3/8 inch, or 10 mm, so doors can be planned around that projection over the cabinet front.
How does the further door retraction affect cabinet access?
The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases front clearance for accessing interior space or equipment.
What does door alignment adjustability provide for installers?
Door alignment adjustability in the overlay pocket door system provides fine tuning of door position, helping installers bring reveals and overlay alignment into a consistent visual line.
What is the purpose of the overlay damper unit adjustment screw?
The overlay damper unit has an adjustment screw that lets the installer change the damping action, tailoring the closing feel of the pocket door to the cabinet application.
Selecting This ALT-ST15-D10LL-22 Kit For Your Build
The Sugatsune America ALT-ST15-D10LL-22 overlay pocket door kit pairs a minimum cabinet depth of 22-1/2 inches with a door height range from 47-1/4 inches to 63 inches, so it targets specific cabinet proportions. The overlay pocket door system adds door alignment adjustability and an overlay amount up to 3/8 inch, supporting consistent reveals in overlay layouts. Further door retraction compared with the ALTST20-D10 series helps when clear access in front of the cabinet is important. For cabinets built around these dimensions and overlay needs, this pocket door hardware kit offers a defined, repeatable configuration.