Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 28-9/16", Door Height 47-1/4" - 63", 4-Slides, Further Door Retraction, - ALT-ST15-D10LL-28

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a pocket door hardware set designed to create retracting overlay doors in cabinet applications using four slides, so doors can move smoothly in and out of the opening while staying supported. This kit is specified as an overlay pocket door system with door alignment adjustability, which lets you fine-tune the door position after installation so reveals and margins look consistent across adjoining fronts. The minimum cabinet depth rating of 28-9/16 inches defines the carcass depth needed, which helps you design or verify cabinet cases around this hardware from the start. The stated door height range of 47-1/4 inches to 63 inches establishes the workable door size window, so tall doors can retract without binding. The fittings are engineered to allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases access to the interior and keeps doors clearer of adjacent components.

Key Pocket Door Hardware Details That Matter

• The overlay pocket door system with door alignment adjustability gives you built-in adjustment points, which simplifies dialing in precise overlay and alignment during trim-out so face frames and fronts line up cleanly.
• The overlay amount of up to 3/8 inch, or 10 mm, defines how far the door overlays the cabinet opening, which helps you coordinate door sizing, hinge drilling patterns, and face layout with other fronts in the run.
• The design using 4 slides spreads the load across multiple slide members, which supports smoother door travel and helps the door stay stable as it transitions between closed and fully retracted positions.
• The fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series increase clear access to shelves or equipment, which is useful when doors need to clear hardware or workspace in front of the cabinet.
• The overlay damper unit with an adjustment screw provides a controlled damping action at the overlay position, which allows you to fine-tune the closing behavior so the door movement feels controlled at the front of the cabinet.

Overlay Pocket Door Installation And Fit Details

This overlay pocket door hardware is specified for a minimum cabinet depth of 28-9/16 inches, which sets the carcass dimension needed so the door has room to retract fully on its 4-slide system. The supported door height range of 47-1/4 inches to 63 inches defines the vertical envelope where the hardware geometry works correctly, which helps you pair it with appropriately sized doors. The overlay amount of up to 3/8 inch, or 10 mm, guides how you size and drill the door so it overlays the cabinet face as planned when closed. The overlay pocket door system with door alignment adjustability is designed so you can make post-installation tweaks at the hardware, which reduces rework on the door itself when bringing everything into line.

Pocket Door Hardware Use In Cabinet Projects

Where This Sugatsune Pocket Door Kit Fits Best

This pocket door hardware falls under pocket door hardware in the multimedia and workspace components category, which aligns it with cabinet projects where doors need to retract fully for access to equipment or work surfaces. The minimum cabinet depth of 28-9/16 inches is well suited to deeper casework, so it fits applications like multimedia cabinets, workstations, or storage units built to that depth. The supported door height range of 47-1/4 inches to 63 inches makes it appropriate for medium to tall doors, which often appear in built-in media walls or tall utility cabinets. The overlay amount of up to 3/8 inch, or 10 mm, means it is geared to overlay cabinet designs rather than inset layouts, which helps align it with face styles where the door overlays the opening.

Details That Support Repeatable Pocket Door Results

The specification as an overlay pocket door system with door alignment adjustability gives you hardware-based adjustment, which supports repeatable door alignment across multiple openings in a bank of cabinets. The 4-slides configuration stabilizes the door through its travel path, which helps maintain consistent gaps and reduces the tendency for the door to rack as it transitions to the pocket position. The fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series create extra clearance when the door is open, which helps prevent interference with adjacent cabinetry, equipment, or workspace. The overlay damper unit with an adjustment screw lets you tune the damping action, which supports a consistent feel across multiple doors and helps match the closing behavior to the project requirements.

Common Questions About This Pocket Door Kit

Selecting This Overlay Pocket Door System

This overlay pocket door system aligns with pocket door hardware projects needing a minimum 28-9/16 inch cabinet depth, a door height range of 47-1/4 inches to 63 inches, and an overlay amount up to 3/8 inch. The 4-slides configuration, door alignment adjustability, and overlay damper unit with an adjustment screw work together to support smooth retraction and fine-tuned alignment. When project dimensions and overlay style match these specifications, choosing manufacturer part ALT-ST15-D10LL-28 helps standardize on a defined Sugatsune America pocket door solution for multimedia and workspace cabinet applications.