Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 19-11/16" - 27-9/16", 2-Slides, Further Door Retraction, - ALT-ST15-D10S-19
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware system designed for overlay cabinet doors, giving installers a defined solution for multimedia or workspace cabinet fronts. The overlay pocket door system supports doors in the 19-11/16 inch to 27-9/16 inch height range, so one kit can handle a typical span of upper or lower cabinet installations. A minimum cabinet depth of 19-1/2 inches is specified, which sets a clear requirement when planning cabinet carcass sizes around the hardware. The system uses 2 slides, which guide the door as it moves in and out of the cabinet for a controlled pocketing action. These verified dimensions and components define where this pocket door hardware kit fits best in shop layouts or built-ins.
Key Overlay Pocket Door Details For Projects
- The overlay pocket door system is described as having door alignment adjustability, which gives installers a way to fine-tune the overlay door position after mounting to get consistent reveals across adjacent fronts.
- Overlay amount is up to 3/8 inch (10 mm), so the face of the door can overlap the cabinet opening by that amount, helping match common overlay conditions in cabinetry runs.
- An overlay damper unit with adjustment screw is specified, providing a way to adjust the damper action so the door movement can be tuned to the cabinet build and user preference.
- Fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases the clear access at the front of the cabinet when the door is pocketed.
Installation Parameters And Cabinet Fit Details
The minimum cabinet depth of 19-1/2 inches defines the carcass depth needed for this ALT-ST15-D10S-19 pocket door setup, so cabinet sides and shelves can be laid out with that space reserved for the slides and retracted door. The supported door height range of 19-11/16 inch to 27-9/16 inch sets the workable door size window, allowing consistent hardware choice across a series of doors with similar heights. The overlay amount up to 3/8 inch ties the hardware to overlay-style fronts, which matters when aligning with neighboring doors and drawer fronts that share the same overlay reveal.
Using This Pocket Door Hardware In Cabinet Runs
Where This Pocket Door Hardware Works Best
This pocket door hardware kit is part of pocket door hardware and pocket door slides, so it is aimed at cabinetry where doors need to slide back into the cabinet rather than swing out, such as multimedia and workspace cabinets. The minimum cabinet depth of 19-1/2 inches means it suits deeper cabinets where a door can fully retract alongside interior components. The door height range of 19-11/16 inch to 27-9/16 inch makes it appropriate for medium-height doors, often found on upper cabinets or specialized equipment enclosures. Fittings that allow further door retraction than the ALTST20-D10 series help free up more front access, which is useful when doors must clear monitors, equipment, or work surfaces.
Details That Support Alignment And Repeatable Results
The overlay pocket door system provides door alignment adjustability, giving installers an adjustment range to align the door face with adjacent fronts and cabinet edges for repeatable visual results across multiple openings. The overlay amount up to 3/8 inch (10 mm) defines how far the door can overlap the front of the cabinet, which simplifies layout when repeating the same overlay across a run. The overlay damper unit with adjustment screw lets the installer adjust damper behavior, so the motion of the pocket door can be tuned for smoother travel that suits the cabinet use. Fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series support consistent clearance when the door is open, which can reduce interference with equipment or stored items positioned near the front.
Common Questions About This Sugatsune Door System
What cabinet depth does the ALT-ST15-D10S-19 pocket door require?
The Sugatsune overlay pocket door kit specifies a minimum cabinet depth of 19-1/2 inches, which sets the carcass depth needed to house the slides and the retracted door.
What door height range does this overlay pocket door system support?
The overlay pocket door system is for doors with heights from 19-11/16 inch to 27-9/16 inch, covering a typical span of medium cabinet doors used in multimedia or workspace applications.
How much overlay does this pocket door hardware allow on the cabinet front?
The pocket door hardware supports an overlay amount up to 3/8 inch, or 10 mm, so the door face can overlap the cabinet opening within that range for consistent reveals.
How does the further door retraction affect cabinet access?
The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, increasing front access space when the door is open.
What is the role of the overlay damper unit on this system?
The overlay damper unit with adjustment screw lets the installer adjust damper behavior, so door movement can be tuned to the cabinet and usage.
What identifies this Sugatsune pocket door kit model?
This Sugatsune America pocket door kit is identified by manufacturer part number ALT-ST15-D10S-19, tying it to the ST15 S-type 19 series pocket door hardware.
Choose This Kit For Overlay Pocket Door Runs
The Sugatsune America ALT-ST15-D10S-19 pocket door kit combines an overlay pocket door system, door alignment adjustability, and an overlay damper unit with adjustment screw to support controlled pocketing in cabinets built to a 19-1/2 inch minimum depth. The supported door height range of 19-11/16 inch to 27-9/16 inch and overlay amount up to 3/8 inch give a defined window for planning fronts in multimedia or workspace cabinets. For projects calling for fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series, this pocket door hardware kit offers a targeted option.