Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware system designed for cabinet applications where the doors overlay the cabinet face. The kit is in the pocket door hardware product class, so it is built specifically to move doors into and out of a cabinet opening in a controlled way. The web description identifies it as an overlay pocket door system with door alignment adjustability, so the hardware allows fine tuning of how the door sits relative to the cabinet face. The minimum cabinet depth of 19-1/2 inches defines the basic cabinet size requirement, which helps plan carcass depth on new builds. The specified door height range of 63 inches to 78-3/4 inches sets the working envelope for door sizing, so doors can be designed or selected to match this hardware without trial fits.
The overlay pocket door system with door alignment adjustability is designed so the installed door position can be tuned relative to the cabinet face after hardware installation. The overlay amount specification of up to 3/8 inch (10 mm) describes how far the door can overlap the face of the cabinet, which helps match the system to overlay layouts in built-ins and casework. Having a minimum cabinet depth of 19-1/2 inches provides a clear dimension for cabinet design so the slides and synchronized board have sufficient space to operate. The door height range of 63 inches to 78-3/4 inches defines where the hinges, mounting plates, and slides will work together as intended, so tall cabinet doors can be planned within this span.
The product is categorized under pocket door slides within shelf, closet, and garage organization as well as multimedia and workspace components, so it is aimed at cabinet installations that need doors to retract into the cabinet space. The overlay pocket door system description shows it is intended for overlay doors rather than inset doors, which shapes how the cabinet face and door edges are laid out. The minimum cabinet depth of 19-1/2 inches works with deeper cabinets such as multimedia units, storage cabinets, or workspace casework, where there is enough depth for the door to retract fully on the four slides. The door height range of 63 inches to 78-3/4 inches means the kit suits mid to tall doors, which aligns with many full-height cabinet and closet openings in those applications.
The overlay pocket door system with door alignment adjustability allows the mounted door to be shifted into a more accurate position after the main hardware is installed, which supports tighter reveals and more consistent overlay lines along the cabinet. The presence of four slides provides multiple support and guidance points for the door, which helps maintain alignment during movement so the adjusted position holds from open to closed. The synchronized board in the kit links the slide motion, helping both sides of the door travel together so alignment adjustments are not lost through uneven slide movement. Three hinges and three hinge mounting plates give the door multiple fixed pivot points tied directly to the slides, which stabilizes the door plane after adjustment. The overlay damper unit with an adjustment screw lets the installer tune how the door settles at the end of travel, which helps the adjusted overlay and alignment remain consistent at the closed position.
The pocket door kit has a minimum cabinet depth of 19-1/2 inches, which guides how deep the cabinet must be so the four slides and synchronized board can move the door fully inside.
The overlay pocket door system supports door heights from 63 inches to 78-3/4 inches, so doors planned within that range can work with the slides, hinges, and synchronized board.
The overlay pocket door kit allows an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door face can overlap the cabinet face frame or case edge.
The overlay pocket door system with door alignment adjustability lets the installed door position be fine tuned, which supports consistent reveals and more precise overlay across the opening.
The synchronized board listed in the web description ties the slide movement together, which helps both sides of the door travel evenly as it moves into and out of the cabinet.
The overlay damper unit with an adjustment screw lets door closing be tuned at the end of travel, which helps the door settle into its overlay position in a controlled way.
This Sugatsune America overlay pocket door kit, identified by manufacturer part number ALT-ST20-D10L-19, is defined for a minimum cabinet depth of 19-1/2 inches and door heights from 63 inches to 78-3/4 inches, which provides clear sizing parameters for cabinet design. The overlay amount specification of up to 3/8 inch sets expectations for how the doors can be laid out on an overlay cabinet. The combination of four slides, a synchronized board, three hinges, three hinge mounting plates, and an overlay damper unit with an adjustment screw creates a coordinated hardware set aimed at smooth movement and adjustable alignment. For cabinet, closet, multimedia, or workspace casework that fits these dimensions, this pocket door hardware offers a defined way to plan an overlay retracting door solution.
