Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 28-9/16", Door Height 47-1/4" - 63", 3-Slides, - ALT-ST20-D10M-28

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a pocket door hardware system designed to let an overlay cabinet door slide back into the cabinet using coordinated slides, hinges, and an overlay damper unit. This overlay pocket door system is specified with a minimum cabinet depth of 28-9/16 inches, so it supports deeper multimedia or workspace cabinets where doors need to clear interior equipment. The door height range of 47-1/4 to 63 inches defines the working envelope, giving a clear window for designing medium-height cabinet doors around this system. The kit uses 3 slides to guide the motion, so the door travels in a controlled path as it opens and retracts. A synchronized board connects the motion of the slides, so both sides of the door track together for smoother operation and more consistent reveals.

Key Pocket Door Details That Support Workflow

• The minimum cabinet depth of 28-9/16 inches establishes how far back the door can recess, which matters when planning interior components so the retracted door does not interfere with shelves or equipment.
• The specified door height range of 47-1/4 to 63 inches ties the system to mid-height doors, helping layout work where the pocket door must align with adjacent fronts in a run of cabinets.
• The use of 3 slides distributes the door load across multiple tracks, which supports smoother door travel during repeated opening and closing in multimedia or workspace settings.
• The synchronized board coordinates the slides, which keeps both sides of the door moving together and helps maintain even gaps around the door face in use.
• The overlay damper unit with adjustment screw manages the closing motion and lets the installer fine-tune the damping action, which helps achieve a controlled, quieter close tailored to the specific door weight.

Overlay Pocket Door Fit, Alignment, And Motion

This pocket door hardware kit is described as an overlay pocket door system, so the door sits over the cabinet face rather than inset, which matters when matching overlay conditions across a project. The stated overlay amount of up to 3/8 inch, or 10 millimeters, defines how far the door can cover the cabinet front, which guides face-frame or frameless layout decisions. Door alignment adjustability is built into the system, so the hinges and related components allow fine-tuning of the door position after mounting, which helps straighten reveals and compensate for small cabinet irregularities. The overlay damper unit is described as having an adjustment screw, so the damping can be tuned, which lets the motion be optimized for the specific door construction and use pattern.

Using This Pocket Door Hardware In Real Projects

Where This Overlay Pocket Door Kit Fits Best

This pocket door hardware kit falls under pocket door slides within pocket door hardware and is suited to cabinets deep enough to accept the 28-9/16 inch minimum cabinet depth, which fits common multimedia and workspace cabinet formats. The product is identified as a Sugatsune America pocket door kit, so it aligns with projects already using Sugatsune pocket door hardware in the same installation. The combination of 3 slides, 3 hinges, and 3 hinge mounting plates defines a layout centered on a single overlay door that must move out and then back into the cabinet, which works well where doors would otherwise obstruct equipment or work areas. The damper and synchronized board support use in environments where controlled, coordinated motion of the door is important for daily operation.

Details That Support Repeatable Alignment And Setup

The specified door alignment adjustability gives the installer a way to shift the door position after the cabinet is already fixed, which helps bring the door into plane with neighboring fronts and improves visual consistency along a full run. The overlay amount of up to 3/8 inch, or 10 millimeters, acts as a clear design parameter when calculating stiles, rails, and gapping, which supports repeatable shop drawings and CNC programming. The synchronized board tying together the 3 slides means that once the slide positions are set, the door motion remains coordinated, which reduces the need for repeated readjustments as the door is cycled. The overlay damper unit with its adjustment screw provides another tuning point, letting the closing speed and cushioning be set during final adjustments, which can streamline punch-list work on site. Overall, the defined door height range, minimum cabinet depth, and overlay amount combine into a predictable geometry that supports consistent fabrication and installation across multiple cabinets using this same pocket door system.

Common Questions About This Overlay Pocket Door Kit

Selecting This Sugatsune Pocket Door Hardware Kit

The Sugatsune overlay pocket door kit ALT-ST20-D10M-28 provides a defined combination of 3 slides, synchronized board, overlay damper unit, hinges, and hinge mounting plates built around overlay pocket door operation. The stated minimum cabinet depth, door height range, and overlay amount give clear dimensional targets for cabinet layout and door construction. For projects needing an overlay pocket door system within those parameters, this Sugatsune America kit offers a coordinated set of pocket door hardware components ready to integrate into multimedia and workspace cabinet designs.