Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 22-1/2", Door Height 78-3/4" - 94-1/2", 4-Slides, - ALT-ST20-D10LL-22

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a complete pocket door hardware solution designed for overlay cabinet doors that slide back into the cabinet. It is built as an overlay pocket door system with door alignment adjustability, so the door position can be fine-tuned after installation to meet layout requirements. The kit is specified for a minimum cabinet depth of 22-1/2 inches, which supports deeper cabinet designs commonly used for multimedia or workspace components. It handles door heights from 78-3/4 inches to 94-1/2 inches, covering tall cabinet applications where full-height pocket doors are needed. Four slides are specified in the kit, providing a guided track system that supports smooth door travel in and out of the cabinet opening during repeated use. The hardware belongs to the pocket door hardware product class, so it is aimed at projects that need doors to retract fully into the cabinet.

Overlay Pocket Door Details That Support Workflows

• The overlay amount is up to 3/8 inch (10 mm), which defines how far the door overlays the cabinet face and helps set consistent reveals across a run of cabinets.
• The overlay pocket door system with door alignment adjustability lets the installer fine-tune the door position, which helps correct small cabinet or hinge tolerances after mounting.
• The minimum cabinet depth of 22-1/2 inches sets a clear requirement for cabinet construction, so the door can retract without obstruction during operation.
• The specified door height range from 78-3/4 inches to 94-1/2 inches covers tall cabinet doors, which supports applications such as multimedia, storage, or workspace enclosures.
• The kit uses four slides, giving the door a dedicated slide system that supports guided movement along the cabinet depth for predictable door travel.
• The synchronized board works with the slide system to coordinate door motion, helping the door track evenly as it opens and closes.

Mounting And Adjustment For Overlay Pocket Doors

This overlay pocket door system with door alignment adjustability is engineered so the door position can be adjusted after hardware installation, which helps align the door with adjacent fronts and trims visual gaps. The overlay amount up to 3/8 inch (10 mm) sets how much the door overlaps the cabinet front, which helps match established overlay standards on a project. The minimum cabinet depth of 22-1/2 inches dictates the casework dimension needed so the door can move fully back into the cabinet cavity. The door height range of 78-3/4 inches to 94-1/2 inches identifies suitable tall doors, so the hardware geometry matches the door size. The overlay damper unit with adjustment screw allows the closing behavior of the overlay door to be tuned, which supports controlled closing action.

Using This Pocket Door Hardware In Projects

Where This Sugatsune Pocket Door Kit Fits Best

This product is categorized as pocket door hardware and is part of the shelf, closet and garage organization and multimedia and workspace components families, so it is oriented toward cabinets that conceal equipment or storage behind tall doors. The specified minimum cabinet depth of 22-1/2 inches supports deeper cases, such as media cabinets or workstations, where doors need to retract clear of the interior. Door heights from 78-3/4 inches to 94-1/2 inches align with tall cabinet designs, which suits full-height fronts on closets or built-in storage runs. Using an overlay pocket door system means the door overlays the cabinet front while still being able to slide back inside, supporting layouts that require clean exterior lines when doors are closed.

Details That Support Alignment And Repeatable Results

The overlay pocket door system with door alignment adjustability allows the door to be adjusted in position after initial installation, which helps achieve consistent reveals and reduces rework when cabinet conditions vary. The overlay amount up to 3/8 inch (10 mm) defines the intended overlay geometry, which supports consistent planning of cabinet face frames or panel edges across a project. Four slides provide the guided support path for the door, so its motion in and out of the cabinet remains controlled over the full travel. The synchronized board coordinates motion across the slide system, helping the tall door move evenly and reducing the chance of racking during operation. The overlay damper unit with adjustment screw lets the installer tune closing behavior, which supports smoother operation tailored to door size and weight. The manufacturer part number ALT-ST20-D10LL-22 identifies this specific configuration for ordering and project documentation.

Common Questions About This Pocket Door Kit

Select This Kit For Overlay Pocket Door Projects

The Sugatsune overlay pocket door kit combines four slides, a synchronized board, three hinges, three hinge mounting plates, an overlay damper unit with adjustment screw, and installation hardware to support overlay pocket doors in tall, deep cabinets. The specified minimum cabinet depth of 22-1/2 inches and door height range of 78-3/4 inches to 94-1/2 inches help align this kit with projects built around taller, deeper casework. The overlay pocket door system with door alignment adjustability and overlay amount up to 3/8 inch (10 mm) defines clear planning parameters for reveals and door travel. For projects using pocket door hardware in multimedia, workspace, or storage cabinets, the manufacturer part number ALT-ST20-D10LL-22 provides a precise hardware specification.