Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 24-1/2", Door Height 31-1/2" - 47-1/4", 2-Slides, - ALT-ST20-D10S-24

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a pocket door hardware system designed to let a cabinet door slide back into the cabinet rather than swing out, which creates a clean front and a clear opening when the door is retracted. This kit is categorized as pocket door hardware and uses pocket door slides to support that motion, so the door moves on a guided track instead of relying on standard hinges alone. The system is identified by manufacturer part ALT-ST20-D10S-24, giving installers a precise reference when matching to drawings or reordering for additional cabinets. As an overlay pocket door system, it is designed so the door overlays the cabinet front, which affects the face reveal and alignment on built-ins, media cabinets, or similar projects. In practical terms, this setup helps streamline door motion on cabinets where a sliding, retracting action is preferred.

Key Overlay Pocket Door Details For Projects

• The overlay pocket door system has door alignment adjustability, which allows fine tuning of the door position after installation so the face lines up with adjacent fronts and reveals.
• The overlay amount is up to 3/8 inch (10 mm), which defines how far the door overlays the cabinet face and helps plan face frame or panel layouts around that projection.
• The system has a minimum cabinet depth of 24-1/2 inches, which sets the depth requirement so the door can fully retract within the cabinet without interfering with interior components.
• The specified door height range is 31-1/2 inches to 47-1/4 inches, which tells the installer what door sizes work with this hardware so the slides and alignment features operate as intended.
• The pocket door hardware uses pocket door slides as part of the overlay pocket door system, which supports smooth in-and-out movement and consistent door travel over time.

Overlay Pocket Door Mounting And Adjustment Use

The overlay pocket door system has door alignment adjustability, which lets the installer shift the mounted door slightly so the overlay face is even with neighboring doors or panels. The overlay amount is up to 3/8 inch (10 mm), which means the design anticipates that specific projection when positioning the cabinet front, so job planning can account for reveals and clearances. The minimum cabinet depth of 24-1/2 inches directly influences how the cabinet box is built, because the door must slide fully into that depth to sit out of the way. With the specified door height range of 31-1/2 inches to 47-1/4 inches, the mounting layout and hinge positions can be planned for doors in that size window, helping produce consistent motion and alignment across a run of cabinets.

How This Pocket Door Hardware Works On Cabinets

Where The Sugatsune Overlay Pocket Door Kit Fits

This product is classified as pocket door hardware within pocket door slides, so it is intended for cabinet applications that use a retracting door instead of a swinging door. The web description calls it an overlay pocket door system, which means it is used on cabinets where the door overlays the front rather than sitting flush inside an opening. The minimum cabinet depth of 24-1/2 inches defines cabinet cases that can accept the hardware, so projects with that depth or greater can accommodate the sliding pocket action. The door height range of 31-1/2 inches to 47-1/4 inches indicates the vertical span where the pocket door slides and hinges are designed to operate effectively on typical cabinet doors.

Why These Pocket Door Details Support Consistent Results

The overlay pocket door system provides door alignment adjustability, which helps installers dial in the final overlay so gaps appear even and doors sit visually straight across multiple units. The overlay amount of up to 3/8 inch (10 mm) sets a clear design target for how far the door overlaps the cabinet face, simplifying layout decisions around face frames and adjacent surfaces. An overlay damper unit with adjustment screw is part of the system, which lets the motion be tuned so the door movement feels controlled at the end of travel, supporting a more refined operation. The presence of two slides and a synchronized board in the system coordinates door travel between both sides, which helps keep the door balanced as it moves. Hinges and hinge mounting plates within this pocket door hardware define the pivot and connection points, tying the hinged swing and sliding pocket action into a single integrated motion. The manufacturer part ALT-ST20-D10S-24 gives a consistent spec reference, which supports repeatable cabinet designs when the same pocket door setup is used across multiple projects.

Common Questions About This Overlay Pocket Door Kit

Select This Pocket Door Kit For Overlay Cabinets

This Sugatsune America overlay pocket door kit, identified as ALT-ST20-D10S-24, is designed as pocket door hardware for overlay cabinet doors within a door height range of 31-1/2 inches to 47-1/4 inches. The system combines pocket door slides, a synchronized board, hinges, hinge mounting plates, and an overlay damper unit with adjustment screw to support a retracting overlay door motion. With door alignment adjustability, an overlay amount up to 3/8 inch, and a minimum cabinet depth of 24-1/2 inches, it gives installers defined parameters for planning cabinet dimensions and door layout. For overlay cabinet projects that call for a sliding, retracting door action, this hardware set offers a clearly specified configuration.