Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 47-1/4" - 63", 3-Slides, - ALT-ST20-D10M-19
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware system for overlay cabinet doors, giving installers a defined solution when a door needs to slide back into the cabinet. The kit is designed for cabinets with a minimum depth of 19-1/2 inches, so cabinet design can be laid out around a known interior clearance. It supports door heights from 47-1/4 inches to 63 inches, covering a common range for tall multimedia or workspace cabinet doors. This system is built around three slides, creating a guided motion path that supports the door as it moves in and out of the cabinet. As a pocket door system OL/SC, it belongs to a dedicated pocket door hardware class, so it fits projects where doors must clear the front opening and store inside the cabinet. The manufacturer part ALT-ST20-D10M-19 ties directly to this specific configuration.
Key Overlay Pocket Door Details For Projects
- The overlay pocket door system has door alignment adjustability, giving installers the ability to fine-tune how the overlay door sits relative to the cabinet face after installation for a cleaner finished line and reduced rework.
- An overlay amount up to 3/8 inch (10 mm) is supported, so face layouts can be planned knowing how far the door can overlap the cabinet opening while still working within the system design.
- The system uses three slides as a core component, creating a controlled motion sequence that supports the door while it transitions from closed position to fully recessed position.
- The kit works as a pocket door system OL/SC in the pocket door hardware class, so it is intended for cabinets where doors need to retract inside instead of swinging out into the room.
- The assembly is specified as an overlay pocket door system, aligning it with overlay cabinet construction where the door covers the front edge rather than sitting inset within the opening.
Installation-Oriented Overlay Door Fit And Motion
This overlay pocket door system is structured around a cabinet minimum depth of 19-1/2 inches, so casework can be sized to give the slides and stacked door position enough room to function. Door height capability from 47-1/4 inches to 63 inches sets clear boundaries for where this hardware fits in tall cabinet layouts. Three slides manage the door travel into the cabinet, providing support as the door moves from overlay position to the stored position. Door alignment adjustability built into the system allows the installer to respond to minor construction variation by adjusting how the overlay door lines up against the cabinet front, which helps produce consistent reveals across multiple openings.
Using This Pocket Door Hardware In Real Projects
Where This Overlay Pocket Door System Fits Best
This overlay pocket door system is designed for cabinet applications where the door must overlay the front and then retract into the interior. With a minimum cabinet depth of 19-1/2 inches, it matches projects that can dedicate interior space for the door stack and slide travel, such as multimedia and workspace components. The supported door height range of 47-1/4 inches to 63 inches targets taller door openings rather than small wall cabinets, which suits full-height upper sections or equipment bays. As pocket door hardware in the pocket door slides category, it serves situations where swing doors would obstruct equipment, work surfaces, or walkways, allowing the door to sit inside the cabinet cavity when open.
Details That Support Alignment And Repeatable Results
Door alignment adjustability is built into this overlay pocket door system, so after mounting, the door position can be tuned to match adjacent fronts and provide even gaps. This helps maintain visual consistency across banks of cabinets and reduces the need to alter the case after hanging doors. An overlay amount up to 3/8 inch (10 mm) defines the relationship between the door edge and cabinet opening, which helps with layout and sizing of neighboring fronts, fillers, or trim. The three-slide configuration manages the motion path as the door transitions from closed to fully recessed, supporting the door through its travel for smoother action. As a defined pocket door system OL/SC with manufacturer part ALT-ST20-D10M-19, it gives shops and installers a consistent reference for repeat ordering and specification across multiple projects.
Common Questions About ALT-ST20-D10M-19 Use
What cabinet depth does this pocket door system require?
The overlay pocket door system is specified for a minimum cabinet depth of 19-1/2 inches, giving the slides and stored door enough room to operate inside the cabinet.
What door height range does the Sugatsune overlay pocket door kit support?
The Sugatsune overlay pocket door kit is designed for door heights from 47-1/4 inches to 63 inches, so it targets taller door openings in multimedia and workspace style cabinets.
How far can the door overlay the cabinet opening?
The overlay pocket door system supports an overlay amount up to 3/8 inch, or 10 mm, helping define how the door front relates to the cabinet face frame or case edge.
How does the overlay damper unit with adjustment screw help?
The overlay damper unit with adjustment screw provides a controllable damping function, allowing the door motion to be moderated and fine-tuned during setup for smoother closing behavior.
What is the role of the three slides in this pocket door hardware?
The three slides form the motion system that supports and guides the door as it moves from the overlay position into the cabinet interior and back out again.
What does the ALT-ST20-D10M-19 part number represent?
ALT-ST20-D10M-19 is the manufacturer part number for this specific Sugatsune overlay pocket door system, tying all these functional details to a single repeatable specification.
Select This Overlay Pocket Door System With Confidence
This Sugatsune overlay pocket door kit gives a defined pocket door hardware solution for overlay cabinet doors that must retract inside the cabinet. With a minimum 19-1/2 inch cabinet depth, a door height range of 47-1/4 inches to 63 inches, and an overlay amount up to 3/8 inch, planning cabinet sizes and door fronts becomes straightforward. Door alignment adjustability and the overlay damper unit with adjustment screw support fine-tuned motion and visual alignment. For projects centered on multimedia and workspace components where clear access and clean fronts matter, choosing the ALT-ST20-D10M-19 pocket door system aligns the hardware with those needs.