
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware set designed for overlay cabinet applications where the door needs to slide back into the cabinet. The kit is specified for a minimum cabinet depth of 22-1/2 inches, so it suits deeper cabinet runs where doors must clear equipment or shelves. A listed door height range of 63 inches to 78-3/4 inches defines the vertical working envelope, which helps plan tall cabinet layouts and ensures the door operates within the hardware limits. The system is described as an overlay pocket door system, so the door front overlays the cabinet face before retracting, which supports clean fascia lines on built-ins. This kit is part of the pocket door hardware product class, aligning it with multimedia and workspace components where retracting doors help keep fronts out of the way during use.
The minimum cabinet depth of 22-1/2 inches sets the basic installation requirement for this overlay pocket door kit, so cabinet interiors must be built to that depth or greater for the slides to travel correctly. The specified door height range from 63 inches to 78-3/4 inches guides door panel sizing, keeping panels within the intended operating geometry of the four-slide arrangement. Door alignment adjustability is integrated into the overlay pocket door system, giving alignment control after mounting, which helps bring tall doors into plane with adjoining fronts without re-drilling hinge locations. The overlay damper unit uses an adjustment screw, providing a defined point for tuning damping action during installation or later adjustments as door weight or use patterns demand.
This pocket door hardware kit is categorized under multimedia and workspace components, so it is positioned for cabinets that house equipment, screens, or work areas where doors need to retract fully. The minimum cabinet depth of 22-1/2 inches works with deeper enclosures often used for devices or storage that projects into the cabinet. With a door height range from 63 inches to 78-3/4 inches, the kit targets tall doors common on full-height storage or equipment cabinets rather than short wall units. The overlay pocket door system layout maintains an overlay front when closed, which is suitable for installations that carry a continuous overlay aesthetic across multiple cabinet bays.
Door alignment adjustability is a core feature of this overlay pocket door system, letting the installer correct small variances in cabinet construction or door machining, which supports consistent reveals from unit to unit. The overlay amount of up to 3/8 inch, or 10 mm, defines a clear design envelope, allowing repeatable door and face design across a project using the same hardware specification. The overlay damper unit, equipped with an adjustment screw, gives an accessible control point for fine-tuning closing behavior, which helps achieve similar motion across multiple doors in a run. The presence of four slides in the kit distributes movement along the door height, supporting straighter travel on tall doors, which can reduce binding and the need for repeated service adjustments. The named manufacturer part number ALT-ST20-D10L-22 ties the kit to a specific configuration, aiding repeat ordering for standardized cabinet programs.
The Sugatsune overlay pocket door kit is specified for a minimum cabinet depth of 22-1/2 inches, which sets the basic cabinet interior dimension for proper slide travel.
The overlay pocket door system is rated for door heights from 63 inches to 78-3/4 inches, guiding how tall the door panel should be for intended operation.
The pocket door hardware allows an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door front can cover the cabinet face when closed.
The overlay damper unit uses an adjustment screw to set damping behavior, which lets the installer tune the motion characteristics of the pocket door.
This pocket door kit specifies four slides to guide the tall door over its full height, promoting smoother travel within the listed door height range.
The ALT-ST20-D10L-22 manufacturer part number identifies this specific Sugatsune overlay pocket door kit configuration for selection and repeat ordering.
This Sugatsune overlay pocket door kit combines an overlay pocket door system, four-slide guidance, and a defined minimum cabinet depth of 22-1/2 inches, giving clear parameters for cabinet design. The stated door height range of 63 inches to 78-3/4 inches and overlay amount up to 3/8 inch, or 10 mm, provide concrete sizing limits for planning door panels. Door alignment adjustability and an overlay damper unit with adjustment screw support on-site tuning, which helps bring finished cabinets into line with project expectations.