Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 22-1/2", Door Height 47-1/4" - 63", 3-Slides, - ALT-ST20-D10M-22

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a pocket door hardware solution designed for overlay cabinet doors. The kit is identified by manufacturer part ALT-ST20-D10M-22, which helps match it to project drawings or hardware schedules. It is classified as pocket door hardware within pocket door slides, so it is aimed at cabinet and multimedia pocket door applications rather than general interior doors. The system is an overlay pocket door system, so the door overlays the cabinet face rather than being inset, which affects layout and reveal lines on finished installations. The kit uses 3 slides, giving the door guided travel as it moves between open and pocketed positions, which supports smoother motion along the cabinet depth. This kit is sold in a per kit unit, aligning it with job-based buying instead of loose components for this configuration.

Overlay Pocket Door Details That Support Workflow

• The overlay pocket door system supports overlay cabinet doors, which lets the door cover the cabinet front and align with surrounding overlay fronts for a consistent facade.
• Minimum cabinet depth of 22-1/2 inches is specified, so cabinets can be sized to give the slides and pocketed door the space they need along the depth.
• Suitable door height from 47-1/4 inches to 63 inches defines the working range, helping match the kit to medium-height cabinet, multimedia, or workspace doors within that span.
• Overlay amount up to 3/8 inch, or 10 mm, sets how far the door can overlay the face, which guides layout of reveals and adjacent fronts in a run of cabinets.
• Three slides are specified in the kit description, giving multi-point support to the door as it travels, which supports more stable movement during opening and closing.
• Three hinges and three hinge mounting plates are specified, so the door has defined pivot points tied into cabinet construction at three locations along the height.

Mounting And Alignment For Pocket Door Installation

This overlay pocket door system is part of pocket door slides, so it is built around slide-based movement for the door. An overlay damper unit is specified as part of the system, giving a damping function to the overlay action so the door movement can be moderated near the end of travel. The overlay damper unit has an adjustment screw, which lets the installer adjust the damper behavior using the screw during setup or later tuning. Door alignment adjustability is called out in the web description, so the hardware layout supports alignment adjustments after initial mounting to refine gaps and reveals. The presence of a synchronized board in the kit means the system coordinates movement between components, supporting more even action as the door travels.

Pocket Door Hardware Use In Cabinet Projects

Where This Overlay Pocket Door Kit Fits Best

This product is an overlay pocket door system from Sugatsune America in the pocket door hardware class, so it is aimed at cabinet, closet, multimedia, and workspace components where a door needs to slide back into the cabinet body. The minimum cabinet depth of 22-1/2 inches directs it toward installations with adequate carcass depth, such as entertainment cabinets, equipment enclosures, or deeper storage cabinets. The allowable door height range from 47-1/4 inches to 63 inches makes it suitable for mid-height doors rather than short compartment fronts or full-height tall units, aligning it with upper or mid-section enclosures. An overlay amount up to 3/8 inch, or 10 mm, fits overlay layouts where the door slightly overlaps the face frame or case front, supporting common overlay planning on cabinetry and multimedia furniture.

Details That Support Alignment And Repeatable Results

The system description highlights door alignment adjustability, so the hardware layout supports fine tuning of the door position after mounting, which helps achieve consistent reveals and clearances without rebuilding the cabinet. The overlay damper unit with adjustment screw ties damping control directly to a screw adjustment, so the installer can refine end-of-travel behavior by turning the screw rather than changing parts. The synchronized board specified for the kit coordinates motion between the 3 slides, which supports smoother, more even travel of the door as it moves between open and stowed positions. Using 3 slides along with 3 hinges and 3 hinge mounting plates spreads loads across multiple points, which helps the door track more predictably over the full height within the stated height range. As part of pocket door slides from Sugatsune America, this kit groups the critical sliding and hinging elements for this overlay pocket door layout so the motion path and overlay behavior match the stated specifications.

Key Questions About This Pocket Door System

Select This Kit For Overlay Pocket Door Projects

This Sugatsune overlay pocket door kit from Wurth Baer Supply combines a defined minimum cabinet depth of 22-1/2 inches, a door height range of 47-1/4 inches to 63 inches, and overlay up to 3/8 inch, giving clear design limits for planning cabinets. Door alignment adjustability, a synchronized board, three slides, and an overlay damper unit with adjustment screw all support controlled, tunable motion for overlay pocket doors. For cabinet, multimedia, or workspace projects that match these dimensions and overlay requirements, choose this ALT-ST20-D10M-22 pocket door hardware kit to align the door motion with the stated specifications.