Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 16-9/16", Door Height 47-1/4" - 63", 3-Slides, - ALT-ST20-D10M-16
Description
Sugatsune Overlay Pocket Door Kit For Cabinet Use
Sugatsune overlay pocket door kit is a pocket door hardware system designed for overlay cabinet doors using the ALT-ST20-D10M-16 configuration. This setup supports a minimum cabinet depth of 16-9/16 inches, so it suits cabinet runs where that depth is available and consistent. The system is built around three slides, which guide the door movement and support the door as it travels into and out of the cabinet. Door height coverage from 47-1/4 inches to 63 inches lets this hardware address a useful door size range on taller cabinets or multimedia enclosures. As a pocket door system in the pocket door slides category, it fits projects where a door needs to open and then store within the cabinet footprint. The overlay pocket door system format helps keep the door aligned to the face of the cabinet while still allowing it to recess.
Key Overlay Pocket Door Details For Projects
- The overlay pocket door system design keeps the door on an overlay layout, which supports face-aligned fronts in multimedia or storage cabinets where appearance and front alignment matter.
- Door alignment adjustability is built into the overlay pocket door system, giving installers adjustment capability to fine-tune overlay and reveal during final setup or after use.
- Door height capability from 47-1/4 inches to 63 inches covers a defined tall-door range, so one hardware configuration can be used across multiple cabinet heights within that span.
- The overlay amount is up to 3/8 inch, or 10 mm, which defines how far the door overlaps the cabinet face and guides door and panel layout in the design phase.
- An overlay damper unit with an adjustment screw is part of the system, so the door movement can be tuned at that point for controlled action that suits the installation.
- The configuration uses three slides, which distribute door support and movement and help the door travel into the cabinet on a guided path suitable for pocket use.
Overlay Pocket Door Installation And Adjustment Points
The ALT-ST20-D10M-16 overlay pocket door system centers on three slides that carry the door into the cabinet depth of at least 16-9/16 inches, so planning that depth into the casework is critical to its operation. Door height coverage from 47-1/4 inches to 63 inches means the installer can work within that span without changing to a different pocket door hardware class. Door alignment adjustability built into the system gives room to bring the overlay door into alignment with surrounding fronts when the cabinet is already in place. The overlay amount up to 3/8 inch, or 10 mm, sets a clear overlay target, simplifying layout of the door edges relative to the case. The overlay damper unit uses an adjustment screw, providing a direct point to tune the motion of the door to suit the cabinet application.
Using This Pocket Door Hardware In Real Projects
Where This Overlay Pocket Door Kit Works
This overlay pocket door system from Sugatsune America fits cabinet layouts that can provide a minimum cabinet depth of 16-9/16 inches, letting the door recess fully into the body. With a supported door height range of 47-1/4 inches to 63 inches, this pocket door hardware serves taller cabinet fronts commonly used in multimedia, closet, or workspace components. The three-slide configuration guides the door as it moves, so the door can travel into the cabinet opening while staying supported across its height range. As pocket door hardware for overlay doors, it maintains an overlay relationship at the face of the cabinet while still allowing the door to clear and retract.
Details That Support Alignment And Repeatable Setup
The overlay pocket door system provides door alignment adjustability, giving installers room to correct for small casework variances and to bring door gaps into line with surrounding fronts. An overlay amount up to 3/8 inch, or 10 mm, defines the designed overlap, so layouts can be repeated from job to job using the same measurement. The overlay damper unit with an adjustment screw allows on-site tuning of door motion, helping match the feel of the door to the overall cabinet function. The three slides, together with the ALT-ST20-D10M-16 configuration, provide a defined setup that can be reused across multiple projects when the cabinet depth and door height fall within the specified ranges.
Common Questions About This Pocket Door System
What door sizes does this overlay pocket door kit support?
The Sugatsune overlay pocket door kit supports door heights from 47-1/4 inches to 63 inches, so it covers a defined range of taller cabinet doors within that span.
How deep must the cabinet be for this pocket door hardware?
The overlay pocket door system requires a minimum cabinet depth of 16-9/16 inches, which provides the space needed for the door to recess fully into the cabinet body.
What overlay can I design for with this pocket door kit?
The pocket door kit supports an overlay amount up to 3/8 inch, or 10 mm, which sets a clear limit for how far the door overlaps the cabinet face in layout.
How does door alignment adjustability help during installation?
Door alignment adjustability in the overlay pocket door system allows fine tuning of the overlay and gaps so the door lines up with adjacent fronts after mounting.
What role does the overlay damper unit play in this system?
The overlay damper unit with an adjustment screw lets the installer tune door movement, providing controlled action tailored to the cabinet application.
What is notable about the three-slide configuration?
The three slides in this pocket door kit guide and support the door throughout its travel, helping maintain stable movement across the supported height range.
Select This Kit For Overlay Pocket Door Runs
The Sugatsune overlay pocket door kit in model ALT-ST20-D10M-16 brings together an overlay pocket door system, three slides, and door alignment adjustability designed for doors from 47-1/4 inches to 63 inches and cabinets at least 16-9/16 inches deep. The overlay amount up to 3/8 inch, or 10 mm, offers a clear design parameter when laying out fronts. For projects that match this depth and height range, this pocket door hardware provides a defined configuration that can be applied across multiple cabinets. Put this system to work where an overlay pocket door layout with adjustable alignment supports your cabinet or multimedia builds.