Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware set designed for overlay cabinet doors that slide back into the cabinet. The system is classified as pocket door hardware, so it supports projects where doors need to open fully, then retract out of the way to clear the opening. The manufacturer part ALT-ST20-D10S-16 identifies this specific configuration for repeat ordering or matching to existing installations. The system is described as an overlay pocket door system with door alignment adjustability, so the hardware allows fine tuning of the door position after mounting. This adjustability helps dial in the overlay reveal and smooth motion when the door is opened or retracted. The pocket door kit is listed with a minimum cabinet depth of 16-9/16 inches, which defines the cabinet interior depth required for the door to retract properly into the pocket without interference.
The pocket door kit is specified for a minimum cabinet depth of 16-9/16 inches, which sets the baseline case depth needed for the door to slide back without binding in the pocket. This dimension guides cabinet construction or selection when planning the installation. The system is listed for door heights from 31-1/2 inches to 47-1/4 inches, so it is intended for doors falling within that vertical range, such as medium-height cabinet fronts in multimedia or workspace runs. Working within this door height window helps the slide and damper geometry perform as designed across the full travel. The product is identified as an overlay pocket door system, so it is suited to face-frame or frameless layouts that use overlay doors instead of inset fronts.
The Sugatsune America overlay pocket door system is categorized under shelf, closet and garage organization, along with multimedia and workspace components, so it targets storage and equipment cabinets where clear access is important. In these applications, the pocket door slides allow the door to open and then retract inside the cabinet, keeping the opening free for use. The specified door height range of 31-1/2 inches to 47-1/4 inches aligns with many tall base or upper cabinets in workrooms or media walls. Because the overlay amount is up to 3/8 inch, this kit fits layouts where the door overlays the cabinet front instead of sitting flush inside the opening. That overlay behavior helps coordinate door faces with adjacent cabinet fronts in continuous runs.
The system provides door alignment adjustability, which gives installers the ability to fine tune the door position relative to the cabinet face after the hardware is mounted. This adjustability helps bring the overlay edges into line with neighboring doors and reduces visual stepping between fronts. The overlay amount up to 3/8 inch (10 mm) defines a clear design envelope, making it easier to plan face dimensions and reveals that stay within the working range of the hardware. An overlay damper unit with adjustment screw forms part of the overlay pocket door system, so the closing action can be moderated at the hardware level for smoother motion. The use of 2 slides in the kit guides the door across its travel, supporting consistent pocket movement when the door is opened and retracted. The manufacturer part number ALT-ST20-D10S-16 ties these functional details to a specific Sugatsune America kit, which supports future matching on multi-cabinet or repeat projects.
The pocket door kit is specified for a minimum cabinet depth of 16-9/16 inches, so cabinets built to that depth or deeper provide space for the door to retract into the pocket.
The overlay pocket door system is listed for door heights from 31-1/2 inches to 47-1/4 inches, targeting medium-height doors commonly used in multimedia and storage cabinets.
The Sugatsune overlay pocket door hardware allows an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door can overlay the cabinet front.
The door alignment adjustability lets the installed door position be fine tuned, so overlay gaps and reveals can be brought into line with adjacent cabinet fronts.
The two slides form the guided track for the pocket door, controlling the door as it moves from the closed position into the cabinet interior and back again.
The overlay damper unit uses an adjustment screw so the closing action can be tuned, helping the door move to the closed position with smoother, moderated motion.
The Sugatsune overlay pocket door kit ALT-ST20-D10S-16 combines an overlay pocket door system with alignment adjustability, a defined overlay range up to 3/8 inch, and a minimum cabinet depth of 16-9/16 inches. These defined parameters help plan cabinet dimensions and door sizes that match the hardware capabilities on multimedia, workspace, or storage projects. When a job calls for doors between 31-1/2 inches and 47-1/4 inches that retract into the cabinet, this pocket door hardware provides a targeted solution that ties design dimensions directly to the specified operating range.
