Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 31-1/2" - 47-1/4", 2-Slides, - ALT-ST20-D10S-19
Description
Sugatsune Overlay Pocket Door Kit For Cabinet Use
Sugatsune overlay pocket door kit is a pocket door hardware system designed for overlay cabinet doors on multimedia or workspace cabinets. The system is described as an overlay pocket door system with door alignment adjustability, so it supports fine tuning of how the door sits relative to the cabinet face after installation. The minimum cabinet depth is 19-1/2 inches, which defines the cabinet interior depth needed for the slides and door to travel. Supported door height ranges from 31-1/2 inches to 47-1/4 inches, so it suits medium-height cabinet doors commonly used in entertainment, office, or storage applications. The overlay amount is up to 3/8 inch, or 10 mm, which sets how far the door can overlay the cabinet opening and still work with this system. The kit is classified as pocket door hardware in the pocket door slides category, aligning it with slide-based door concealment inside the cabinet.
Overlay Pocket Door Details That Support Projects
- The overlay pocket door system provides door alignment adjustability, which allows the installer to fine tune the door position to achieve consistent reveals and smooth face alignment in finished cabinetry.
- The overlay amount of up to 3/8 inch, or 10 mm, defines the maximum overlay this system is engineered to handle, helping match door construction and face-frame or frameless layouts to the kit capability.
- The minimum cabinet depth of 19-1/2 inches sets the required interior depth for the slides and retracted door, so cabinet design can be planned around this dimension from the start of the project.
- The specified door height range of 31-1/2 inches to 47-1/4 inches identifies the door size window that the system is intended to carry, guiding door fabrication and layout for this hardware.
- The pocket door kit falls under pocket door hardware and pocket door slides, signaling that it relies on slide mechanisms to move the door in and out of the cabinet for clean access.
Installation Parameters And Overlay Setup Details
The overlay pocket door system is defined with a minimum cabinet depth of 19-1/2 inches, so cabinet bodies need that interior depth for the door to fully retract on the slides. The door height range of 31-1/2 inches to 47-1/4 inches provides the working envelope for door sizing, keeping the door within what the hardware is designed to handle. An overlay amount of up to 3/8 inch, or 10 mm, establishes the overlay design target when planning the door edge and cabinet front relationship. The overlay damper unit includes an adjustment screw, giving a built-in way to adjust the damping action to better match the door movement to the application. Door alignment adjustability built into the overlay pocket door system then supports final on-site tuning of the door position after the cabinet is installed.
Using This Pocket Door Hardware In Cabinet Projects
Where This Overlay Pocket Door Kit Is Applied
The overlay pocket door system is part of the pocket door hardware class and sits in the pocket door slides category, so it is intended for cabinets where a door needs to slide back into the cabinet interior instead of swinging out. The defined minimum cabinet depth of 19-1/2 inches points this kit toward deeper cabinet bodies often used in multimedia, office, or storage applications, where equipment or contents benefit from a retracting door. The supported door height range of 31-1/2 inches to 47-1/4 inches places it in the medium-height cabinet door segment, such as upper cabinets above work areas or equipment bays in entertainment centers. The overlay amount up to 3/8 inch, or 10 mm, makes it suitable for layouts where the door overlays the cabinet front rather than sitting flush within an inset opening. The product is identified by manufacturer part number ALT-ST20-D10S-19 and is associated with Sugatsune America, connecting it to a defined product line within pocket door components.
How Adjustable Features Support Consistent Results
The overlay pocket door system with door alignment adjustability allows the installer to adjust how the door sits relative to the cabinet front, which supports even gaps and a clean visual line when multiple cabinets are installed in a run. The overlay damper unit with adjustment screw provides a way to tune the damper action, helping the door movement feel controlled over time as door weight or usage patterns vary. An overlay amount of up to 3/8 inch, or 10 mm, gives a clear design limit, reducing guesswork when aligning door overlay with adjacent fronts in a larger installation. The minimum cabinet depth of 19-1/2 inches and the door height range of 31-1/2 inches to 47-1/4 inches give concrete boundaries for cabinet and door sizing, which helps standardize design and reduce rework between drawings, fabrication, and installation. The use of pocket door slides within this kit means the door retracts back into the cabinet, which can keep walkways and work zones clear when the cabinet is in use while still allowing full front access.
Common Questions About This Pocket Door System
What door sizes work with model ALT-ST20-D10S-19?
The Sugatsune overlay pocket door kit with part number ALT-ST20-D10S-19 is specified for door heights from 31-1/2 inches to 47-1/4 inches, so doors within that range align with the system design.
How deep does the cabinet need to be for this pocket door kit?
The overlay pocket door system is specified with a minimum cabinet depth of 19-1/2 inches, giving the slides and door enough room to retract inside the cabinet body.
What overlay can this overlay pocket door system handle?
The overlay pocket door kit is documented with an overlay amount up to 3/8 inch, or 10 mm, setting the maximum overlay the hardware is engineered to accommodate.
Does this pocket door kit allow door alignment adjustment after mounting?
The overlay pocket door system is described as having door alignment adjustability, which supports post-install fine tuning of the door position relative to the cabinet front.
How does the overlay damper unit help this pocket door application?
The overlay damper unit includes an adjustment screw, so the damping action can be tuned to influence how the door movement feels during opening and closing.
What type of hardware category does this Sugatsune kit belong to?
This Sugatsune America product is classified as pocket door hardware within the pocket door slides category, indicating it uses slide mechanisms to move the door.
Select This Pocket Door Kit For Overlay Projects
This Sugatsune overlay pocket door kit combines an overlay pocket door system with door alignment adjustability, a defined overlay amount up to 3/8 inch, and an overlay damper unit with adjustment screw to support controlled door movement. With a minimum cabinet depth of 19-1/2 inches and a door height range of 31-1/2 inches to 47-1/4 inches, it fits medium-height doors in deeper cabinet bodies where retracting doors keep fronts clear. For pocket door hardware jobs that match these dimensions and overlay requirements, this pocket door kit offers a defined, slide-based solution for cabinet projects.