NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2136SMB1CUF1 to RSR2136SMB1CUF1.

Omega National 36 Inch Cherry Range Hood For Wall

Omega National 36 inch cherry range hood is a Signature straight wall mount wood range hood that provides overhead ventilation space for residential cooking. The 36 inch width matches standard cooktop spans, so the hood covers the active cooking area effectively.

The hood is constructed as a wood range hood, giving a cabinet-maker style solution that integrates with kitchen cabinetry. The cherry material aligns with common cherry cabinet runs, so installers can coordinate finish work and layout.

This Signature straight wall mount configuration keeps the hood tight to the wall, which fits typical range locations along a cabinet run. As part of the Omega National Signature hood family, it uses standard Signature hood chimneys, so shops working with this series can plan chimney sizing consistently across multiple installations.

The hood ships with a silver metallic liner that accommodates all Broan and Sirius ventilation, so installers can match the internal ventilator system to those ventilation brands while relying on a liner designed for that interface.

Key Details That Support Efficient Hood Projects

• The hood is available in 30, 36, 42 and 48 inch widths, so shops can standardize on one design across different cooktop sizes while keeping layout and installation steps similar from job to job.
• This 36 inch model uses standard Signature hood chimneys, which lets installers reuse a familiar chimney system on multiple projects and simplifies ordering of matching chimney components for taller ceiling conditions.
• The silver metallic liner accommodates all Broan and Sirius ventilation, providing a defined metal capture area sized for those ventilators so layout of the blower and duct transitions stays predictable.
• The hood installs using a standard French cleat hanging system, so crews can set the cleat on layout lines first and then hang the hood body onto the cleat, which streamlines set-and-level steps at the wall.
• All installation hardware is identified as part of the system, so installers can plan to mount using the specified components and focus on layout, wall prep, and ventilation hook-up for a smoother workflow.

Wall Mount Range Hood Installation And Fit

This Signature straight wall mount range hood installs using Omega National's standard French cleat hanging system. The French cleat approach lets installers fasten the cleat to the wall on accurate height and stud locations, then hang the hood body onto that cleat.

Because the hood uses the same chimney system as other Signature hoods, chimney fit and extension planning follow the same dimensions that installers already know from the line. That continuity helps crews keep crown heights, trim intersections, and duct chases consistent from one kitchen to the next.

The silver metallic liner inside the hood is designed to accommodate all Broan and Sirius ventilation, so when a ventilator from those brands is selected, the liner defines the interior working envelope for blower placement and duct connection.

Using This Signature Hood In Real Kitchen Work

Where This 36 Inch Cherry Hood Performs Best

This Omega National wood range hood is categorized as a wood range hood for kitchen and bath cabinet applications, so it suits projects where the ventilation housing needs to coordinate with custom or semi-custom cabinetry. The 36 inch width aligns with common 36 inch ranges and cooktops, giving adequate coverage over the primary burners in many standard layouts.

As a Signature straight wall mount hood, it is intended for wall locations rather than island settings. This matches the majority of residential kitchen designs where the range is on a wall between cabinets. The cherry construction allows builders working with cherry kitchen suites to keep a unified appearance from wall cabinets through the hood area.

The hood uses Omega National's standard Signature hood chimneys, so it fits into projects already designed around that chimney system. When ceiling heights vary from job to job, relying on the same chimney family helps designers and installers repeat successful chimney height solutions in new plans.

The silver metallic liner is specified to accommodate all Broan and Sirius ventilation, which is relevant on jobs where those ventilation brands are part of the specification. This lets the hood function as the finished wood shell while the compatible liner provides the internal surface for Broan or Sirius blowers and ductwork transitions.

Details That Help Repeatable Installation Results

The standard French cleat hanging system supports a repeatable mounting sequence across multiple installations. Installers can locate studs, fasten the cleat on a layout line, and then hang the hood onto the cleat, which helps with consistent elevation and lateral alignment along the wall run.

Using the same Signature hood chimneys across widths from 30 to 48 inches simplifies chimney planning. Crews who have set chimneys on previous Signature hoods can apply those same reference points to this 36 inch cherry model, which reduces layout variation between jobs.

The silver metallic liner inside the hood accommodates all Broan and Sirius ventilation, so once a ventilator from those brands is chosen, installers work within a liner that is already sized and shaped for those systems. That alignment helps keep blower mounting locations and duct outlet transitions within a known zone in the hood interior.

Because the hood falls under Omega National Products wood range hoods and uses the R2136SMB1CUF1 part number, shops can reference that identifier when coordinating between design, purchasing, and installation teams. Clear part identification reduces confusion when multiple hood sizes or wood species are in the same project pipeline.

Common Questions About This Omega National Hood

Selecting This Hood For Your Next Kitchen Run

This Omega National 36 inch cherry Signature straight wall mount range hood, part number R2136SMB1CUF1, ties together wood cabinetry style with ventilation planning. The French cleat hanging system, standard Signature chimney interface, and silver metallic liner that accommodates all Broan and Sirius ventilation provide defined installation parameters for professional shops and serious DIY users. For projects built around cherry cabinets and Broan or Sirius ventilators, this hood offers a coordinated, repeatable solution that fits typical 36 inch cooking zones and supports consistent wall-mounted range layouts.