Genesis Durawrap 96" Drawer Side 3", White, BSC76W

Genesis Drawer Side Blanks For White Drawers

Genesis drawer side blanks use 1/2 inch thick material, so the side wall has substance for solid drawer construction when laying out new boxes or matching existing casework. The vinyl Durawrap surface is 8 mil thick and non-flammable, which gives you a consistent, durable white face while meeting projects that call for a non-flammable drawer side material. Each blank uses a high density particle board core, which improves screw holding strength when you fasten fronts, backs, or slides into the side. All wood blanks are pre-finished with the Endura ultraviolet cured top coat, so the surface is ready to assemble on arrival and does not need separate clear finishing steps. The white finish helps tie into light-colored cabinet interiors, so drawer sides look clean and consistent across a run.

Key Drawer Side Details That Support Your Build

• The 3 inch drawer side height gives you a low-profile side, which works well for shallow drawers or upper layouts where you want quick access without a tall side wall blocking contents.
• The 8 foot blank length lets you cut multiple drawer sides from one piece, which helps standardize heights and reveals while reducing waste on repetitive cabinet runs.
• The high density particle board core is designed for greater screw holding strength, giving better bite when you fasten drawer fronts or attach runners into the side material.
• The Endura ultraviolet cured top coat arrives pre-finished, which removes separate finishing passes and allows you to move directly from cutting and machining into assembly.
• The 8 mil thick vinyl Durawrap skin provides a protective, cleanable white surface, which helps maintain appearance in normal drawer use where surfaces see sliding contact.
• The non-flammable Durawrap material adds a safety-oriented surface property, which can support projects where a non-flammable drawer side skin is specified.

Installation And Drawer Fit Details For This Blank

Each drawer blank has a 1/4 inch drawer bottom dado, so 1/4 inch bottoms slide into a pre-cut groove instead of needing a separate machining pass. The dado simplifies layout because bottom thickness is defined, which helps keep drawer heights consistent across a bank. All drawer blanks have a 9/16 inch, or 14 mm, bottom reveal, so the visible gap from the bottom edge of the side to the bottom panel stays predictable. That bottom reveal helps align drawer fronts and slides, because you know exactly where the bottom panel will sit relative to the side edge. The square edge profile keeps machining straightforward for joinery or hardware, since there are no shaped edges to work around when cutting to length or boring.

Using White Vinyl Durawrap Drawer Sides On Projects

Where This 3 x 8 White Drawer Side Works

The drawer side material is 3 inches high and 8 feet long, so it suits small utility drawers, vanity drawers, or shallow kitchen drawers where you want a low side profile across a longer run. The white vinyl Durawrap surface matches common white cabinet interiors, which helps these blanks blend into modern kitchen, bath, or closet installations using light-colored cases. The non-flammable Durawrap material supports drawer interiors in projects where a non-flammable surface on exposed drawer sides is valued. Drawer side heights in this product line run from 2-3/4 inches through 10 inches, so this 3 inch size sits at the low end of the range for more compact drawer boxes. Other heights and species are available, allowing you to coordinate different drawer depths in the same job while keeping a similar construction approach.

Details That Support Consistent Assembly Results

The high density particle board core gives greater screw holding strength, which helps fasteners stay tight when securing fronts, backs, or drawer slide brackets into the side. That stronger hold can reduce rework from stripped fasteners during installation or later adjustment. The Endura ultraviolet cured top coat arrives pre-finished on all wood blanks, which keeps surfaces uniform and reduces color variation from job to job. The pre-finished surface also means parts move from cutting and machining directly to assembly, so finishing does not delay drawer installation. The 1/4 inch drawer bottom dado and 9/16 inch bottom reveal together define the relationship between side and bottom, which helps you repeat the same clearances every time you cut parts from the 8 foot length. Blank lengths at 8 feet let you lay out several drawers along one piece, giving consistent grain direction in the core and a continuous white face along all cuts. The square edge profile simplifies jigs and stops because reference faces stay flat, supporting more reliable cuts and bores across multiple blanks on larger cabinet runs.

Common Questions About Genesis Drawer Side Blanks

Selecting This Drawer Side For Your Next Run

This Genesis drawer side blank pairs a 3 inch height with an 8 foot length, so it fits shallow drawers laid out across longer cabinet runs. The 1/2 inch thick, high density particle board core and 8 mil non-flammable vinyl Durawrap surface provide a sturdy, clean white side ready for assembly. With the Endura ultraviolet cured top coat, 1/4 inch bottom dado, and 9/16 inch bottom reveal already built in, you gain predictable fit and finish while cutting parts directly from stock for your next set of drawers.