Genesis Durawrap 96" Drawer Side 8", White, BSC203W

Genesis Drawer Side Blanks For Reliable Drawers

Genesis drawer side blanks use 1/2 inch thick material so the side wall supports typical drawer loads while keeping weight manageable on slides and guides. The vinyl Durawrap surface is 8 mil thick, creating a uniform outer layer that resists everyday contact in normal shop and cabinet environments. This material is described as non-flammable, which contributes to safer use in woodworking and commercial interiors where flame performance is part of the spec. Each blank has a core made of high density particle board, giving stronger screw holding strength than lower density cores when fastening fronts, backs, or slide brackets. All wood blanks are pre-finished with Endura ultraviolet cured top coat, so the faces arrive ready to assemble without separate finishing passes. Drawer side heights from 2-3/4 inch through 10 inch support a range of drawer depths using the same material family.

Key Drawer Side Details That Support Builds

• The 8 foot blank length lets you cut multiple drawer sides from one piece, which helps standardize setups and reduce material handling on repetitive cabinet runs.
• The 1/2 inch thickness gives a familiar interface for common drawer construction systems, simplifying joinery choices and hardware alignment.
• Vinyl Durawrap at 8 mil thickness provides a consistent white finish layer, which helps finished drawers look uniform across a project.
• The non-flammable material description supports use where flame behavior matters, aligning with specifications that call out that characteristic.
• High density particle board core delivers greater screw holding strength, giving fasteners more bite when anchoring drawer fronts or backs.
• The Endura UV cured top coat means surfaces are pre-finished, so drawer parts can move straight from cut to assembly without separate coating stages.

Drawer Side Fit, Dado, And Bottom Reveal Details

Each drawer side blank has a 1/4 inch drawer bottom dado, so standard 1/4 inch drawer bottoms can slide into place without custom groove sizing. All drawer blanks also have a 9/16 inch, or 14 mm, bottom reveal, positioning the drawer bottom up from the cabinet runner zone for consistent clearance. The blanks use a square edge profile, which suits straightforward joinery cuts and clean inside corners on drawer assemblies. With drawer side heights ranging from 2-3/4 inch through 10 inch, the system supports shallow to deeper drawers while keeping dado and reveal relationships consistent across sizes.

How These Genesis Drawer Blanks Work In Practice

Where Genesis Drawer Side Materials Are Used

These drawer side materials 1/2 thick, vinyl Durawrap 8 inch x 8 foot white blanks sit in the drawer construction systems and drawer blanks class, so they are aimed at shop-built drawer boxes. The 8 foot length matches typical cabinet shop equipment, letting you cut sides for kitchen, bath, or commercial casework drawers from one blank. Drawer side heights from 2-3/4 inch through 10 inch support varying storage depths in the same project line. The high density particle board core gives screw holding strength that suits mounting drawer fronts and backs directly into the sides. The 1/4 inch bottom dado built into each blank accepts 1/4 inch drawer bottoms, used widely in residential and commercial cabinetry.

Why Design Details Support Repeatable Drawer Results

The 9/16 inch bottom reveal is fixed across the drawer blanks, so drawer bottoms align consistently above runners or slides from one cabinet to the next. The square edge profile keeps layout simple, because cutting to length and assembling does not require coping or special shaping to meet other parts. The Endura ultraviolet cured top coat arrives pre-finished, so surface color and sheen stay consistent across all sides cut from a blank. Vinyl Durawrap at 8 mil thickness covers the exterior faces with a white layer, keeping drawer interiors visually uniform when used across a room of cabinets. The non-flammable description aligns with projects where flame performance of casework materials is part of the documented requirement. With Genesis drawer side blanks offered as part of a drawer construction system, shops can align heights, dado positions, and reveals across multiple drawer sizes for predictable fit.

Common Questions About BSC203W Drawer Side Use

Select Genesis Drawer Blanks For Consistent Builds

The Genesis drawer side materials 1/2 thick, vinyl Durawrap 8 inch x 8 foot white design gives shops a defined platform for repeatable drawer construction. The 1/4 inch bottom dado and 9/16 inch bottom reveal are already set, so each cut side maintains the same bottom position. High density particle board cores deliver screw holding strength for fastening drawer fronts and backs directly into the side. With pre-finished Endura UV cured top coat and an 8 mil vinyl Durawrap layer, these drawer blanks move directly from cutting to assembly. For drawer construction systems work that values uniform dimensions and finish, this Genesis BSC203W drawer side blank aligns material, fit, and appearance in one component.