Drawer Side Materials 1/2" Thick, Vinyl Durawrap 10" x 8' Black

Genesis Drawer Side Blanks For Custom Drawers

Genesis drawer side blanks in 1/2 inch thick Vinyl Durawrap material give you a ready-to-assemble drawer side that is already sized for 10 inch drawer height and 8 foot length, so you can cut to your cabinet widths with consistent stock. The Vinyl Durawrap material is 8 mil thick and non-flammable, so the surface provides a uniform black finish while supporting projects where a non-flammable drawer side material is required. A core made of high density particle board provides greater screw holding strength, so fasteners bite securely into the drawer side and support stable front and back connections. All wood blanks are pre-finished with Endura ultraviolet cured top coat, so there is no separate finishing step and the drawer sides go straight from saw to assembly. The 10 inch height fits applications that need a taller black drawer profile from a single blank size.

Key Drawer Side Details That Support Workflow

• The 1/2 inch thick construction sets a predictable drawer side thickness, so joinery setups and drawer slide clearances can be planned around a consistent side dimension for repeat runs.
• The core made of high density particle board delivers greater screw holding strength, so mechanical joints at fronts and backs stay tight under typical drawer loading and fastening patterns.
• The Vinyl Durawrap material is 8 mil thick and non-flammable, so the wrapped surface provides a uniform black face that also addresses projects where non-flammable drawer materials are specified.
• All wood blanks are pre-finished with Endura ultraviolet cured top coat, so you can skip separate finishing steps and move directly from cutting and machining into drawer box assembly.
• Drawer side heights from 2-3/4 inches through 10 inches are available, so shop standards can be built around consistent materials for shallow and tall drawers using the same product line.
• Blank lengths of 8 feet let you rip multiple drawer sides from each piece, so material yield is straightforward on common shop equipment for production or small runs.

Installation-Ready Drawer Side Joinery Features

All drawer blanks have a 1/4 inch drawer bottom dado, so the groove for the bottom panel is already machined and you only need to cut lengths and fit bottoms to that standard thickness. A 9/16 inch, or 14 mm, bottom reveal is built into the profile, so the drawer bottom sits at a consistent offset from the underside of the drawer side and keeps interior depth predictable across different drawer sizes. Blanks have a square edge profile, so you work from clean, straight reference edges when cutting to length or running any additional machining, and assembly with typical drawer fronts and backs stays simple. Drawer side heights are offered from 2-3/4 inches through 10 inches, so this 10 inch black option aligns with the tallest standard height in the range for deeper storage drawers.

Using Vinyl Durawrap Drawer Sides In Projects

Where Genesis Drawer Side Blanks Fit Best

This 10 inch black Vinyl Durawrap drawer side blank suits drawer construction systems that rely on drawer side materials with 1/2 inch thickness, because the side thickness and dado location are already established. The 8 foot length works well in cabinet and woodworking shops that cut multiple drawer sides from linear stock, since each length can be optimized for a batch of same-height drawers. The 1/4 inch drawer bottom dado supports drawer designs that use 1/4 inch bottom panels, so the bottom slides into the groove without extra milling passes. The 9/16 inch bottom reveal helps create drawer boxes where the bottom panel is raised from the cabinet hardware mounting plane, which keeps internal storage depth and outside dimensions aligned to common drawer slide layouts. The square edge profile supports straightforward alignment against fences, so cuts remain precise along the wrapped black surface during layout and trimming.

Why These Drawer Details Improve Consistency

The Vinyl Durawrap material being 8 mil thick and non-flammable provides a uniform covering over the high density particle board core, so the drawer side presents a consistent black surface across exposed edges and interior faces. The core made of high density particle board offering greater screw holding strength means screws used at the drawer front and back engage more fibers, supporting durable mechanical joints during repetitive use. All wood blanks being pre-finished with Endura ultraviolet cured top coat eliminates separate staining or top-coating steps, so assembly scheduling can focus on cutting, machining the ends, and fastening components. Drawer side heights ranging from 2-3/4 inches through 10 inches let you standardize on this construction system from shallow utility drawers up through this 10 inch tall storage drawer, keeping dado dimensions and bottom reveal consistent. Blank lengths of 8 feet simplify stock management, since each length aligns with typical shop racks and saw setups.

Common Questions About Genesis Drawer Side Blanks

Selecting This 10 Inch Black Drawer Side Blank

This 10 inch x 8 foot Genesis Vinyl Durawrap drawer side material provides a 1/2 inch thick, non-flammable black drawer side with a high density particle board core, so you can build deeper drawers with stronger screw holding. The 1/4 inch drawer bottom dado and 9/16 inch bottom reveal are already machined into the square edge profile, so bottom panels and joinery follow a standard pattern from blank to blank. All wood blanks being pre-finished with Endura ultraviolet cured top coat lets production or serious DIY work focus on accurate cutting and assembly when specifying this BSC254BK drawer side material for black drawer box runs.