Genesis Durawrap 96" Drawer Side 5", White, BSC127W

Drawer Side Materials For Consistent Drawer Builds

Drawer Side Materials 1/2" Thick from Genesis provide a vinyl Durawrap drawer side blank that streamlines building consistent drawer boxes. The 5 inch height works for many standard drawer applications, reducing layout time when planning cabinet runs. The 8 foot blank length spans long drawer sides or lets you cut multiple shorter parts from one piece, which helps organize cutting sequences on the shop bench. The 1/2 inch thick construction fits common drawer system dimensions, supporting predictable joinery setups. Non-flammable vinyl Durawrap at 8 mil thickness forms the outer surface, giving a finished appearance right off the rack and eliminating separate surfacing steps. A high density particle board core is engineered for greater screw holding strength, supporting strong mechanical fastening at the front and back. Each blank is designed as part of a drawer construction system so drawer sides stay uniform across a project.

Key Drawer Side Details That Support Workflow

• The vinyl Durawrap material is 8 mil thick and non-flammable, so the drawer side face arrives with a consistent finished skin that avoids separate lamination steps and helps maintain a uniform look across multiple drawers.
• The core is made of high density particle board for greater screw holding strength, which supports solid front and back attachment and helps the drawer resist loosening under repeated use in cabinet installations.
• All wood blanks are pre-finished with an Endura ultraviolet cured top coat and are ready to assemble, so there is no separate finishing cycle on the interior surfaces and drawers can move directly from cutting to assembly.
• All drawer blanks have a 1/4 inch drawer bottom dado, which gives a defined groove for standard drawer bottoms and simplifies setting up cutting and assembly jigs around that bottom panel thickness.
• A 9/16 inch (14 mm) bottom reveal is built into the blank, which establishes the relationship between the drawer bottom and the side edge and helps keep drawer clearances consistent from unit to unit.
• Blank lengths are 8 feet with drawer side heights from 2-3/4 inches through 10 inches, so a range of heights can be matched to different cabinet drawer demands while still working off the same length format.

Installation Geometry And Drawer Fit Details

This Genesis drawer side blank uses a 1/2 inch thick profile, which works with many common drawer slide and hardware layouts so installers can rely on familiar clearances. The built-in 1/4 inch drawer bottom dado defines the drop-in location for the drawer bottom, helping keep the bottom panel square during glue-up. With a 9/16 inch bottom reveal, the distance from the bottom edge of the side to the exposed drawer bottom is already set, simplifying planning for face frame or frameless cabinet alignments. The 5 inch drawer side height suits medium-depth storage drawers while staying manageable during clamping and squaring. Because the wood blanks are pre-finished with Endura ultraviolet cured top coat, interior surfaces do not require post-install touch-up and drawers can be put into service immediately after installation.

How This Drawer Side Material Fits Shop Use

Where These Genesis Drawer Side Blanks Are Used

Genesis drawer side blanks in this 5 inch x 8 foot format are used in drawer construction systems where uniform sides are needed across a bank of cabinets. The 8 foot length lets a shop cut both left and right sides for multiple drawers from a single stick, which supports efficient nesting on a panel saw or chop saw station. Heights available from 2-3/4 inches through 10 inches mean these drawer side materials support shallow top drawers and deeper storage drawers using the same construction approach. The high density particle board core with greater screw holding strength suits applications where mechanical fastening is preferred for front and back joints, such as using screws in conjunction with glue blocks or dowels. Because all wood blanks are pre-finished with Endura ultraviolet cured top coat, these drawer sides match well in cabinet interiors where a clean, consistent surface is important without separate finishing passes.

Details That Support Reliable Drawer Assembly Results

The vinyl Durawrap material at 8 mil thickness creates a durable surface on the drawer side, so during handling, machining, and installation the face remains stable as cuts and dados are made. Non-flammable properties give the surface predictable behavior under normal woodworking shop conditions. The 1/4 inch drawer bottom dado machined into every blank standardizes the bottom panel thickness across all drawers, which simplifies ordering sheet goods and setting up groove-cutting equipment for matching bottoms. A 9/16 inch (14 mm) bottom reveal is built into the design, so installers can anticipate the vertical location of the drawer bottom in relation to the side and keep slide positions consistent from cabinet to cabinet. The 1/2 inch thick profile works with many common drawer hardware layouts, giving fabricators a familiar edge reference for setting slides and drawer fronts. Because the blanks are part of a drawer construction system and are ready to assemble, they lend themselves to repeatable assembly-line style workflows in both professional shops and serious DIY settings.

Common Questions About This Genesis Drawer Side

Select This Drawer Side For Systematic Builds

The Genesis Drawer Side Materials 1/2" Thick, Vinyl Durawrap 5" x 8' White give shops a defined geometry for drawer construction, with a built-in bottom dado and reveal that simplify layout. The pre-finished Endura ultraviolet cured top coat keeps interior faces ready for use as soon as drawers are assembled. The high density particle board core provides greater screw holding strength at joints, supporting repeated opening and closing in everyday cabinet service. Using the 8 foot blanks with 5 inch height helps standardize drawer builds across multiple cabinets, so projects stay consistent from the first box to the last.