Drawer Side Materials 1/2" Thick, Vinyl Durawrap 4" x 8' White

Drawer Side Materials For White 4 x 8 Runs

drawer side materials 1/2 inch thick describe Genesis drawer side blanks that use a 1/2 inch thick construction, giving drawer projects a consistent side thickness that matches common cabinet practices and keeps layouts predictable across multiple boxes. The vinyl Durawrap material is 8 mil thick and non-flammable, so the finished surface stays protected while supporting typical shop safety requirements during cabinet builds. Each blank has a core made of high density particle board for greater screw holding strength, so mechanical fasteners bite solidly and help joints stay tight in service. All wood blanks are pre-finished with Endura ultraviolet cured top coat and are ready to assemble, which removes separate finishing steps and keeps production moving quickly. Blank lengths are 8 feet, letting runs cover longer drawer sides without splicing pieces. Drawer side heights range from 2-3/4 inches through 10 inches, so side height can match different cabinet and furniture drawer designs.

Key Drawer Side Details That Support Builds

• Vinyl Durawrap material is 8 mil thick and non-flammable, giving the drawer side a durable wrapped surface that also supports use in typical shop and project environments where flame spread characteristics matter.
• Blanks have a core made of high density particle board for greater screw holding strength, so fasteners engage firmly along the edge and help keep drawer side connections solid over time in service.
• All wood blanks are pre-finished with Endura ultraviolet cured top coat and are ready to assemble, reducing finishing steps and allowing drawers to move from cutting and machining directly into assembly.
• All drawer blanks have a 1/4 inch drawer bottom dado and a 9/16 inch (14 mm) bottom reveal, which sets a consistent relationship between the bottom panel and side wall for repeatable drawer box layouts.
• Blank lengths are 8 feet, and drawer side heights are 2-3/4 inches through 10 inches, so different drawer depths can be produced from the same stock while maintaining continuous grain and finish along the run.
• Blanks have a square edge profile, providing a straight, clean edge that is easy to reference against tables and fences during cutting and machining operations.

Drawer Side Fit, Bottom Dado, And Edge Details

All drawer blanks have a 1/4 inch drawer bottom dado, so a 1/4 inch bottom panel nests in a defined groove that controls alignment along the full length of the drawer. The 9/16 inch (14 mm) bottom reveal fixes the distance from the cabinet floor to the drawer bottom edge, giving drawer interiors a consistent depth relative to the runners and surrounding casework. Blanks have a square edge profile, which simplifies cutting to final dimension because the factory edge can ride reliably against fences and guides. Drawer side heights from 2-3/4 inches through 10 inches give flexibility to match shallow top drawers or deeper base drawers using the same dado and reveal geometry.

Using Genesis Drawer Side Blanks In Cabinet Work

Where These Genesis Drawer Side Blanks Are Applied

The product is identified as drawer side materials 1/2 inch thick in the Genesis drawer construction systems drawer blanks category, so it fits cabinet and furniture drawer box construction where 1/2 inch sides are standard. The vinyl Durawrap material in white provides a uniform appearance that suits white casework programs and closet or utility cabinetry. Blank lengths are 8 feet, allowing long drawer sides or multiple shorter pieces to be cut from one strip, which supports shop cutting patterns that minimize waste. Drawer side heights ranging from 2-3/4 inches through 10 inches cover common drawer profiles, so one system can serve varied storage depths throughout a project. The high density particle board core supports screw holding strength in typical drawer side joints, which matters when fastening into the core from front, back, or bottom components.

Why These Construction Details Matter For Results

Vinyl Durawrap material at 8 mil thick forms a resilient exterior layer over the high density particle board core, so the wrapped surface resists everyday contact while the core carries fasteners. The non-flammable characteristic of the vinyl Durawrap surface supports use across commercial and residential environments where flame behavior of surfaces is a consideration. The Endura ultraviolet cured top coat on all wood blanks gives a hardened finish that is ready to assemble, which keeps color and sheen consistent from part to part during high-volume drawer runs. The fixed 1/4 inch drawer bottom dado and 9/16 inch bottom reveal set critical drawer dimensions, so bottoms align predictably with slides and surrounding cabinetry without recalculating offsets on each job. The square edge profile offers a reliable reference surface for saws and machining, which supports straight cuts and consistent joinery along the full 8 foot length. The Genesis branding and BSC102W part number give a clear product reference for reordering the same white 4 inch by 8 foot drawer side material for future matching work.

Common Questions About This Genesis Drawer Side

Selecting This White Drawer Side For Your Project

The Genesis drawer side materials 1/2 inch thick design combines an 8 mil vinyl Durawrap non-flammable surface with a high density particle board core, tying appearance and screw holding strength into one drawer side. The fixed 1/4 inch drawer bottom dado and 9/16 inch bottom reveal make drawer geometry predictable across cabinet runs. The 8 foot length and range of drawer side heights from 2-3/4 inches through 10 inches support varied drawer sizes within a consistent white program. For projects that call for a white, ready-to-assemble drawer side with defined bottom details, this Genesis BSC102W blank offers a clear, repeatable choice.