Genesis Durawrap 96" Drawer Side 6", White, BSC152W

Drawer Side Materials Built For Cabinet Projects

Drawer side materials 1/2 inch thick from Genesis give you pre-finished drawer side blanks that are ready to assemble, which streamlines drawer construction when building multiple cabinets or replacement drawers. The vinyl Durawrap material is 8 mil thick and non-flammable, so the finished sides have a consistent surface that withstands typical shop and jobsite conditions. Each blank has a core made of high density particle board for greater screw holding strength, which supports solid attachment of drawer fronts and slides in drawer construction systems. All wood blanks are pre-finished with an Endura ultraviolet cured top coat, so surfaces arrive sealed and consistent, reducing finishing steps in the shop. Drawer side heights are available from 2-3/4 inches through 10 inches, allowing you to match side height to different cabinet and storage layouts while keeping a uniform system.

Key Drawer Side Details For Efficient Builds

• Vinyl Durawrap material is 8 mil thick and non-flammable, so drawer sides present a uniform, durable face that handles regular cabinet use and typical interior environments.
• The core made of high density particle board provides greater screw holding strength, which supports secure mounting of drawer fronts and hardware in standard drawer construction.
• All wood blanks are pre-finished with an Endura ultraviolet cured top coat, so surfaces arrive ready to assemble, saving finishing time while delivering a consistent appearance across projects.
• All drawer blanks have a 1/4 inch drawer bottom dado, giving you a defined groove for bottom panels that speeds layout and helps keep drawer bottoms aligned during assembly.
• A 9/16 inch (14 mm) bottom reveal is built into each blank, so drawer bottoms sit at a predictable offset that helps align drawers with runners and cabinet openings.
• Blank lengths are 8 feet, providing continuous material for multiple drawers or wider cabinet banks while letting you cut drawer sides to the exact length required.

Installation Geometry That Supports Drawer Fit

All drawer blanks have a 1/4 inch drawer bottom dado, so the groove is already machined and sized for common bottom thicknesses, which simplifies cutting and assembly steps. The 9/16 inch bottom reveal creates a consistent distance from the bottom of the drawer side to the bottom panel, which helps keep drawer bottoms parallel to slides and cabinet floors. Drawer side heights from 2-3/4 inches through 10 inches give you options for shallow to tall storage, which allows you to align drawer proportions with drawer guides and cabinet openings. The square edge profile on the blanks creates straight reference surfaces, supporting accurate joins at corners and clean, flush alignment to fronts and backs.

How These Genesis Blanks Fit Into Drawer Work

Where These Drawer Side Blanks Are Used

This Genesis drawer side blank is part of a drawer construction system, so it serves as the structural side of the drawer box in cabinet and storage applications. The 6 inch x 8 foot white configuration suits drawer layouts where a mid-height side is needed across several cabinet bays, letting you cut multiple sides from one length. Being in the drawer side blanks product class, it is designed for use with separate bottoms, fronts, and backs rather than as a one-piece box, which fits common cabinet shop workflows. The 1/4 inch bottom dado and 9/16 inch bottom reveal are set up for drawers that ride on standard runners, so the geometry supports repeatable fit from one drawer to the next. The white finish from the vinyl Durawrap surface coordinates with light interiors, which can be useful in kitchens, baths, and casework where a clean interior appearance is expected.

Why The Construction Details Matter On Site

The vinyl Durawrap material being 8 mil thick and non-flammable gives these drawer sides a stable surface layer, which helps the edges and faces resist routine handling during machining and installation. A core made of high density particle board delivers greater screw holding strength, which supports repeated opening and closing forces at drawer fronts over time. The Endura ultraviolet cured top coat means the wood blanks arrive fully pre-finished, so you cut and assemble without additional coating steps, which supports consistent color and sheen across jobs. The square edge profile improves the accuracy of glue-up and mechanical joining at corners, which helps drawers track correctly on runners and sit square in cabinet openings. Drawer side heights from 2-3/4 inches through 10 inches let you standardize on a construction system while still serving various storage depths, which can simplify layout and cutting patterns in the shop.

Common Questions About This Drawer Side Blank

Select This White 6 Inch Drawer Side For Your Next Run

The Genesis drawer side materials 1/2 inch thick, vinyl Durawrap 6 inch x 8 foot white blank brings together an 8 mil non-flammable surface, a high density particle board core, and an Endura ultraviolet cured top coat, so drawer construction systems benefit from consistent machining, screw holding strength, and ready-to-assemble finishes. With a 1/4 inch bottom dado, 9/16 inch bottom reveal, square edge profile, and available heights from 2-3/4 inches through 10 inches, these drawer side blanks support predictable geometry across cabinet projects. Use this BSC152W drawer side where a white, system-based drawer side blank fits your cabinet layouts.