Genesis Durawrap 96" Drawer Side 10", White, BSC254W

Drawer Side Materials 1/2 Thick For Stable Builds

Drawer side materials 1/2 thick, vinyl Durawrap 10 inch x 8 foot white from Genesis gives you a pre-finished drawer side blank designed for efficient drawer construction. The vinyl Durawrap material is 8 mil thick and non-flammable, so the wrapped surface adds a tough, consistent outer layer that resists typical shop handling. A core made of high density particle board provides greater screw holding strength, which supports solid attachment of fronts and backs. All wood blanks are pre-finished with Endura ultraviolet cured top coat and are ready to assemble, so there is no separate finishing step before building the drawer. The 10 inch drawer side height fits taller drawer applications where extra usable depth helps organize contents. As a drawer side blank in the Genesis drawer construction system, this part fits directly into standard drawer assembly workflows.

Key Drawer Side Details That Support Builds

• Vinyl Durawrap material is 8 mil thick and non-flammable, so the drawer side surface holds up to typical cabinet shop use while also offering a non-flammable outer layer during installation.
• The core is made of high density particle board for greater screw holding strength, giving drawer fronts and backs a solid bite that stays tight in service.
• All wood blanks are pre-finished with Endura ultraviolet cured top coat and are ready to assemble, which removes separate finishing steps and keeps drawer production moving without extra curing time.
• All drawer blanks have a 1/4 inch drawer bottom dado, so standard 1/4 inch bottoms seat directly in the groove for straightforward layout and cutting of bottoms.
• All drawer blanks have a 9/16 inch (14 mm) bottom reveal, which sets a consistent clearance from drawer bottom to side top edge for an even look across a run of cabinets.
• Blank lengths are 8 foot, letting you cut multiple drawer sides from one length and match parts easily for banks of drawers.

Installation Geometry And Drawer Fit Details

Genesis drawer side blanks in this configuration use a 1/2 inch thick profile, giving a known side thickness for fitting slides and hardware in standard cabinet layouts. The 1/4 inch drawer bottom dado is already machined, so cutting the drawer bottom to size is the main remaining bottom operation during assembly. A 9/16 inch bottom reveal is built into every blank, so you can size drawer fronts expecting a consistent side-to-bottom relationship. The 10 inch drawer side height supports taller storage drawers, where the additional side height keeps contents supported. With blank lengths at 8 foot, cutting to length allows precise adaptation to different cabinet widths while keeping the same interface dimensions for bottoms and slides.

Using Genesis Drawer Side Blanks In Shop Work

Where These 10 Inch Drawer Sides Fit Best

This Genesis drawer side blanks product provides a 10 inch high side, which suits deeper storage drawers in base cabinets and other furniture where increased vertical capacity is useful. The 1/2 inch thick profile pairs with common drawer slide clearances, so it works smoothly in typical cabinet carcass dimensions. The high density particle board core offers greater screw holding strength, supporting secure attachment points for drawer fronts, backs, and any internal dividers. With all drawer blanks having a 1/4 inch drawer bottom dado, they align with drawer bottoms cut from 1/4 inch sheet goods used widely in cabinet shops. The 8 foot length lets you nest multiple sides for several drawers from one piece, which helps maintain height and finish consistency.

Why These Construction Details Improve Results

The vinyl Durawrap material at 8 mil thickness forms a protective skin over the high density particle board core, so handling, cutting, and assembling the drawer sides keep the exposed surface uniform. Because the material is non-flammable, it contributes a surface that does not add flammable coating in a cabinet interior. The Endura ultraviolet cured top coat is applied at the factory, creating a pre-finished surface that arrives ready to assemble, which removes brushing, spraying, and drying from the drawer build sequence. A 9/16 inch bottom reveal designed into all drawer blanks sets a predictable distance from the 1/4 inch bottom panel to the top of the side, helping installers align drawer fronts so reveal lines match from drawer to drawer. With blank lengths of 8 foot, cutting each piece to drawer width still preserves the same dado and reveal geometry, so once one drawer is dialed in, others follow the same pattern without layout changes.

Common Questions About This Drawer Side Blank

Select This 10 Inch Side For Consistent Drawers

This Genesis vinyl Durawrap 10 inch x 8 foot white drawer side blank combines a 1/2 inch thick high density particle board core, 1/4 inch drawer bottom dado, and 9/16 inch bottom reveal in one ready-to-assemble piece. The Endura ultraviolet cured top coat and 8 mil non-flammable vinyl Durawrap surface give a consistent white finish across multiple drawers. For shops needing a tall drawer side height with repeatable geometry, this BSC254W drawer side matches common workflows from cutting to final installation.