2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 3mm (300/Box)

2-Cam Adjustable Wing Mounting Plate For Salice Hinges

2-cam adjustable wing mounting plate describes a Salice America hinge mounting plate designed to work with Salice hinges, so it ties directly into common cabinet hinge layouts in the shop. This hinge mounting plate is part of the hinge mounting plates class, which positions it as the cabinet side interface between the case and the hinge arm. The plate is nickel-plated, which resists corrosion and supports long-term performance in typical cabinet environments where moisture or cleaning chemicals are present. It is built from stamped steel or die-cast steel, giving the plate a solid metal structure for holding hinge alignment under load. The mounting plate is a 3mm version, which sets a specific mounting height that installers can match across a run of doors to keep reveals consistent. The adjustable wing design works with the two cam mechanisms to fine-tune door position after installation without dismantling the hinge setup.

Key Mounting Plate Details That Support Installers

• This Salice America hinge mounting plate is compatible with all Salice hinges, so it supports hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, helping one plate standardize multiple hinge programs in the shop.
• The plate provides two cam adjustment with cam height adjustment of plus or minus 2 mm, allowing vertical fine-tuning at the cabinet interface to dial in door reveals after the hinges are fastened.
• It also offers cam depth adjustment from -0.5 mm to +2.8 mm, which lets installers move the door closer to or farther from the case for better overlay or inset alignment without remounting hardware.
• The cabinet side fastening method uses an open hole for #6 x 5/8 inch wood screws, giving a straightforward screw-on installation that fits common cabinet construction practices.
• The nickel plating on the stamped steel or die-cast steel body provides corrosion resistance, which helps the hinge connection stay functional and presentable over the life of the cabinet installation.

Installation And Adjustment Details For This Hinge Plate

This 3mm screw-on hinge plate uses an open hole for #6 x 5/8 inch wood screws on the cabinet side, so the installer positions the plate and drives wood screws directly into the case material. The plate is adjustable through two cams, which provide cam height adjustment of plus or minus 2 mm so the hinge side of the connection can move up or down relative to the cabinet. The same two cam system delivers cam depth adjustment from -0.5 mm to +2.8 mm, shifting the hinge arm toward or away from the face of the cabinet. Because adjustment happens through cams in the mounting plate, door alignment changes can be made with the hinges in place, reducing rework during final fitting.

How This Salice Mounting Plate Works In Cabinet Runs

Use With Salice Hinges Across Cabinet Projects

This Salice hinge mounting plate is compatible with all Salice hinges, so it works with hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+ in both new cabinet builds and hinge layout updates. As a hinge mounting plate in the hinges and hinge base plates category, it serves as the case-side connection point that receives the hinge arm in face frame or frameless cabinet configurations using Salice hardware systems. The 3mm plate height establishes a known reference level along the cabinet interior, helping installers repeat the same hinge position from cabinet to cabinet when using matching drilling patterns. Nickel-plated stamped steel or die-cast steel construction keeps the interface rigid, which is important when multiple doors hang from several hinges on tall pantry or wardrobe applications.

Adjustment Range That Supports Accurate Door Alignment

The two cam adjustment on this plate provides cam height adjustment of plus or minus 2 mm, which lets installers shift doors slightly up or down while the hinge arm remains engaged, tightening reveals at the top and bottom without moving the screw pattern. Cam depth adjustment from -0.5 mm to +2.8 mm adds another axis of control, allowing the door to move closer to or further from the cabinet edge so overlays can be balanced against adjacent doors or panels. Because both adjustments are built into the mounting plate rather than depending on re-drilling, they support small corrections during final fitting while protecting the cabinet material. Using the open hole for #6 x 5/8 inch wood screws, the plate anchors securely to the cabinet side, so cam changes translate directly into predictable hinge motion for repeatable results across a run of doors.

Common Questions About This Salice Hinge Mounting Plate

Selecting This Plate For Salice Hinge Installations

The Salice America BAR3L39F two cam adjustable wing mounting plate combines a 3mm mounting height, nickel-plated stamped steel or die-cast steel construction, and screw-on installation with #6 x 5/8 inch wood screws, giving installers a consistent cabinet-side base. Its compatibility with all Salice hinges, including series 100, 200, 400, F, M, Universal Hinges, and Silentia+, lets one plate style support varied hinge layouts while two cam adjustment in height and depth simplifies final door alignment. For projects built around Salice hinge systems, choosing this plate standardizes hardware, streamlines hinge setup, and supports accurate reveals across cabinet runs.