0mm Die-cast Hinge Mounting Plate, 2 Cam, Screw-on, Salice BAR3R09

Salice Hinge Mounting Plate For Cabinet Work

Salice hinge mounting plate BAR3R09 is a die-cast hinge mounting plate that ties Salice hinges solidly to the cabinet side, giving a stable base for consistent door alignment. The 0mm plate height keeps the hinge position tight to the cabinet, which helps when you are working to a specific overlay or reveal using the hinge adjustments. Screw-on fastening to the cabinet side with #6 x 5/8 inch wood screws creates a positive mechanical connection into the side panel, supporting a firm door feel over time. Nickel plating over the die-cast construction resists corrosion in normal cabinet environments, so hinge settings are less affected by moisture around kitchens and baths. The plate is designed for Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, keeping one mounting solution across multiple hinge families.

Key Mounting Plate Details For Daily Use

• The 0mm Salice hinge mounting plate height holds the hinge close to the cabinet, which helps maintain planned overlays while allowing fine tuning with the built-in hinge adjustments during door alignment.
• Die-cast construction with nickel plating resists corrosion in typical cabinet environments, so the hinge interface stays cleaner and more stable when cabinets are exposed to moisture and cleaning routines.
• The two cam adjustable system on the plate provides cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, letting you dial in door position without relocating screws.
• The screw-on cabinet side fastening uses an open hole for #6 x 5/8 inch wood screws, giving a straightforward installation process that fits common cabinet construction practices.
• Compatibility with Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+ allows one mounting approach across different hinge lines on the same project.

Mounting And Adjustment Details For Installation

This 0mm die-cast hinge mounting plate is a screw-on style that fastens to the cabinet side using an open hole sized for #6 x 5/8 inch wood screws, which matches common shop stock and keeps drilling simple. Once fixed to the cabinet, the two cam design lets you adjust cam height plus or minus 2 mm and cam depth from -0.5 mm to +2.8 mm directly at the plate, so you can move the door in and out and up or down without re-drilling. That range supports typical door alignment needs on frameless cabinets using Salice hinges, helping to correct minor drilling variances and panel tolerances while keeping the hinge arm locked to a rigid base.

How This Hinge Mounting Plate Performs In Work

Where This BAR3R09 Mounting Plate Fits Best

The Salice America BAR3R09 hinge mounting plate is part of the Salice hinge mounting plates product class and sits in the Hinges and Hinge Base Plates category, so it is intended for cabinet hinge mounting rather than general hardware tasks. It fastens directly to the cabinet side with #6 x 5/8 inch wood screws through an open hole, providing a direct interface between the box and the hinge arm on frameless cabinets. The 0mm plate height keeps the hinge arm close to the side panel, which is useful when the hinge geometry is set to achieve a specific overlay using hinge adjustments instead of plate offset. Because it works with Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, it supports projects where several Salice hinge types are used on the same run of cabinetry while still using the same base plate.

Why Two Cam Adjustment Supports Clean Results

The BAR3R09 two cam adjustable hinge plate provides cam height movement of plus or minus 2 mm, letting the door be shifted up or down relative to the cabinet without moving screws, which saves time when aligning multiple doors in a bank. The cam depth range from -0.5 mm to +2.8 mm lets you pull the door slightly toward the cabinet or push it out, which helps flush adjacent faces and maintain consistent reveals. Die-cast steel construction with nickel plating resists corrosion around kitchen and bath cabinets, so the cams continue to turn smoothly for later adjustments. Being a Salice hinge mounting plate tied to hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+ creates a predictable adjustment feel across those hinges, which helps achieve repeatable results on large installations. Support by a lifetime warranty backs the plate for long-term cabinet service.

Common Questions About BAR3R09 Hinge Plate

Selecting This Plate For Salice Hinge Runs

The Salice hinge mounting plate BAR3R09 combines a 0mm plate height, screw-on #6 x 5/8 inch wood screw fastening, and a two cam system with plus or minus 2 mm height and -0.5 mm to +2.8 mm depth adjustment. That combination supports accurate door alignment on frameless cabinets using Salice series 100, 200, 400, F, M, Universal Hinges, and Silentia+ while die-cast construction with nickel plating resists corrosion. For hinge runs that need consistent adjustment behavior backed by a lifetime warranty, this plate offers a unified mounting solution across those Salice hinges.