Domi Snap-On Mounting Plates Two Cam Adjustment, Die-Cast Steel, Screw-On Attachment, 27mm Height

Domi Snap-On Mounting Plates For Salice Hinges

Domi snap-on mounting plates from Salice America are hinge mounting plates in the hinge base plates category, designed to work as the mounting interface for Salice hinges on cabinet cases. The BAR3RU9 part is a 27mm wing base plate, so it positions the hinge at a 27mm mounting height, giving a predictable reference for overlay and door alignment when laying out cabinet runs. As hinge mounting plates, they form the fixed side of the hinge connection on the cabinet, which matters when dialing in reveals across multiple doors. The product is described as premium two cam adjustable hinge mounting plates, so it builds fine-tuning capability directly into the plate rather than relying only on door-side adjustments during installation.

Key Mounting Plate Details That Support Clean Results

• The plates are described as Domi snap-on mounting plates, so the hinge snaps onto the plate, which speeds hinge hanging when installing or changing doors.
• They are constructed of stamped steel or die-cast steel, so the mounting point is metal throughout, which supports stable hinge performance over repeated door cycles.
• Nickel plating is specified to resist corrosion, so the plates maintain surface condition in typical cabinet environments, which helps appearance and smooth hinge engagement.
• The BAR3RU9 part has a 27mm height, so it establishes a consistent mounting height reference that simplifies layout across multiple cabinets.
• The cabinet side fastening method is an open hole for #6 x 5/8 wood screws, so installers can use a common screw size to secure the plate directly to the cabinet.

Installation And Two Cam Plate Adjustment In Practice

The two cam adjustment provides cam height adjustment of plus or minus 2 mm, so installers can raise or lower the hinge position slightly on the plate to correct minor reveal issues without redrilling the cabinet. The same system also provides cam depth adjustment of minus 0.5 mm to plus 2.8 mm, so the door-to-cabinet gap can be brought in or pushed out within that range at the plate, which helps fine-tune door fit against adjacent fronts or face frames. Because the series uses screw-on attachment, the plate is fastened directly to the cabinet with wood screws, giving a secure mechanical connection that supports consistent door alignment once adjustments are dialed in.

Where This 27mm Wing Base Plate Fits In Your Work

Using BAR3RU9 Plates With Salice Hinge Series

The Web description states that these two cam adjustable hinge mounting plates are compatible with all Salice hinges listed there, specifically hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+. This means the BAR3RU9 hinge base plate can serve across those Salice hinge families, so a single 27mm wing base plate pattern can support multiple door styles that use different Salice hinge bodies. Being in the hinge mounting plates product class, this part acts as the cabinet-side partner for those hinges, giving a common interface when standardizing hardware on a job. That consistency helps when planning drilling patterns and door specifications across a shop or site.

Adjustment Range That Reduces Door Rework

The two cam system built into these premium two cam adjustable hinge mounting plates gives both height and depth tuning at the plate, with cam height adjustment of plus or minus 2 mm and cam depth adjustment from minus 0.5 mm to plus 2.8 mm. Having these ranges directly on the mounting plate lets installers correct small layout variations and door warp within that window by rotating the cams rather than relocating the plate. Because the plate is a 27mm wing base plate, the starting geometry is fixed, and the cams provide controlled movement around that base position. Over a run of cabinets fitted with Salice hinges from the specified series, this combination of a stable die-cast or stamped steel, nickel plated plate and adjustable cams helps keep door reveals consistent, reduces the need for remounting, and supports repeatable hinge settings on similar carcasses. The cabinet side fastening with an open hole for #6 x 5/8 wood screws ties those adjustments back into the cabinet structure through a straightforward screw pattern, which keeps the adjusted position steady once locked.

Common Questions About This Salice Mounting Plate

Select This 27mm Plate For Salice Hinge Runs

The Domi snap-on mounting plates with two cam adjustment from Salice America pair a 27mm wing base plate height with stamped steel or die-cast steel construction and nickel plating, so they offer a stable, corrosion-resistant base for Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+. With screw-on attachment using #6 x 5/8 wood screws and integrated cam height and depth adjustments, this BAR3RU9 hinge base plate supports efficient mounting and precise door alignment across cabinet projects.