
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Domi 2-cam adjustable wing mounting plate describes a Salice America hinge mounting plate designed to work with Salice hinges and provide precise door alignment on cabinets. The plate sits in the hinge stack-up between the cabinet side and the hinge arm, so its geometry and adjustment range directly affect reveal and overlay. Its 2mm plate height establishes a predictable baseline for layouts that call for a 2mm base plate in Salice systems, which helps keep drilling patterns and hinge settings consistent across a run of doors. As a hinge mounting plate in the Hinge Mounting Plates product class, it supports the hinge arm so the door can carry normal cabinet door loads. The wing design provides surface area at the cabinet side for screw-on fastening, which suits standard cabinet case construction in many shops.
The Domi 2-cam adjustable wing mounting plate uses an open hole for #6 x 5/8" wood screws on the cabinet side, so it installs with standard wood screw driving tools in typical cabinet case material. Its 2mm plate height defines how far the hinge arm sits off the cabinet side, which factors directly into overlay and gap planning when laying out a cabinet run. Two cam adjustment with plus or minus 2 mm height and -0.5 mm to +2.8 mm depth movement lets installers shift the door vertically and pull the door closer or further from the cabinet to correct for small construction or drilling variances. As the cams move the hinge arm relative to the plate, adjustments happen without moving the plate itself, which keeps screw holes in the cabinet side undisturbed during fine-tuning.
The Domi 2-cam adjustable wing mounting plate sits in Salice hinge assemblies as the interface between cabinet side and hinge arm, making it a core part of hinge layouts that call for a 2mm base plate. As a hinge mounting plate from Salice America for hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, it serves applications that use these Salice hinge families across face frame or frameless cabinet designs configured for that plate height. The 2mm dimension in the product name describes the plate height, which installers use in their hinge charts to arrive at the desired overlay and reveal. Because the plate is nickel-plated stamped steel or die-cast steel, it provides a sturdy, corrosion-resistant platform where the hinge arm locks down, supporting smooth operation as doors are opened and closed.
The Domi 2-cam adjustable wing mounting plate provides two cam adjustments that control both height and depth, translating into repeatable adjustments during cabinet door installation. The cam height adjustment of plus or minus 2 mm allows the hinge arm to move up or down relative to the plate, which installers use to align top and bottom reveals between adjacent doors without changing hinge cup positions. The cam depth adjustment range of -0.5 mm to +2.8 mm shifts the hinge arm in and out from the cabinet side, helping correct for doors that sit slightly proud or shy of the cabinet front because of material tolerances. Since the cams operate within these defined ranges, installers can predict how much turn is needed to correct a given misalignment and can apply similar adjustments across multiple doors. The nickel plating over stamped steel or die-cast steel keeps the cam surfaces and bearing points resistant to corrosion, supporting smooth cam rotation over the life of the cabinet installation.
The Domi 2-cam adjustable wing mounting plate is for Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, so it ties into many common Salice hinge families.
The Domi 2-cam adjustable wing mounting plate offers cam height adjustment of plus or minus 2 mm and cam depth adjustment of -0.5 mm to +2.8 mm, providing usable movement for door alignment.
The Domi 2-cam adjustable wing mounting plate uses a 2mm plate height, which enters directly into Salice hinge charts that determine overlay and reveal for a given hinge and door configuration.
The Domi 2-cam adjustable wing mounting plate is constructed from stamped steel or die-cast steel with a nickel-plated finish, which resists corrosion in typical cabinet environments.
The Domi 2-cam adjustable wing mounting plate uses an open hole for #6 x 5/8" wood screws on the cabinet side, so it fastens directly to the case with standard screws.
The BAR3R29 designation identifies this specific Domi 2-cam adjustable wing mounting plate from Salice America, allowing shops to match the exact hinge plate in ordering and planning.
The Domi 2-cam adjustable wing mounting plate from Salice America combines a 2mm plate height, #6 x 5/8" wood screw fastening, and defined cam adjustment ranges to support efficient cabinet hinge installation. Its compatibility with Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+ allows shops using these families to standardize on one hinge mounting plate geometry for many projects. The nickel-plated stamped steel or die-cast steel build keeps the hinge connection stable while providing the two-cam fine-tuning needed to align doors. For cabinet runs planned around Salice hinge systems, this BAR3R29 hinge mounting plate supports predictable layout and adjustment while matching the hardware family already in use.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each | PGH802BN Mfr# H-0802-7411/M | Hughes Supply 5 mm Brown Plastic L-Shaped Shelf Supports (Bulk), H-0802-7411/M |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBBAR3RC9 Mfr# BAR3RC9 | Domi 2-Cam Adjustment Wing Mounting Plate, Nickel-Plated, Screw-On, 12mm | ||||
Sold in: 1 Each | UBBAR3R99 Mfr# BAR3R99 | Domi 2-Cam Adjustment Wing Mounting Plate, Nickel-Plated, Screw-On, 9mm | ||||
Sold in: 1 Each | UBBAR3R69 Mfr# BAR3R69 | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 6mm, Salice BAR3R69 | ||||
Sold in: 1 Each | UBBAR3R39 Mfr# BAR3R39 | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 3mm | ||||
Sold in: 1 Each | UBBAR3R09 Mfr# BAR3R09 | 0mm Die-cast Hinge Mounting Plate, 2 Cam, Screw-on, Salice BAR3R09 | ||||
Sold in: 1 Each | UBBAR3L69F Mfr# BAR3L69F | Domi 2-Cam Adjustable Wing Mounting Plate, Steel, Nickel-Plated, Screw-On, 6mm | ||||
Sold in: 1 Each | UBBAR3L39F Mfr# BAR3L39F | 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 3mm (300/Box) | ||||
Sold in: 1 Each | UBBAR3L09F Mfr# BAR3L09F | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 0mm, BAR3L09F |