Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 6mm, Salice BAR3R69

Salice Hinge Mounting Plate For Adjustable Fit

Salice hinge mounting plate BAR3R69 is a Domi 2-cam adjustable wing mounting plate that works as the interface between the cabinet and compatible Salice hinges, so you can set door position accurately during installation or service work. The 6mm plate height establishes a consistent starting reference, helping keep hinge layouts uniform across a run of cabinets. Die-cast steel construction provides a solid base for the hinge arm, so adjustment holds during normal cabinet use. The nickel-plated finish resists corrosion in typical kitchen and bath environments, supporting long-term alignment. This mounting plate is part of the Salice hinge system, giving installers a familiar adjustment layout when working across series 100, 200, 400, F, M, Universal Hinges, and Silentia+. A lifetime warranty from Salice underscores its role as a long-term component in cabinet installations.

Key Mounting Plate Details That Drive Accuracy

• The two cam adjustment built into this mounting plate allows cam height adjustment of plus or minus 2 mm, giving fine vertical tuning of the door position after the hinge is fixed to the cabinet.
• The same two cam system provides cam depth adjustment from -0.5 mm to +2.8 mm at the plate, so you can bring the door closer to or farther from the cabinet front without relocating screw holes.
• The 6mm plate height defines a fixed offset for the hinge arm, which supports predictable overlay and reveal when you repeat the same plate across multiple doors on a project.
• The nickel plating on the die-cast steel body resists corrosion, which helps maintain smooth cam operation and stable adjustment in typical cabinet environments over the life of the installation.
• The cabinet side fastening pattern uses an open hole sized for #6 x 5/8 inch wood screws, allowing straightforward screw-on mounting to common cabinet materials without special anchors.

Mounting And Adjustment For Salice Hinge Runs

This hinge mounting plate is designed as a screw-on solution, using an open hole layout for #6 x 5/8 inch wood screws in the cabinet side, so installers can secure it directly into wood-based cabinet construction. Once fixed, the two cam design provides independent height adjustment of plus or minus 2 mm and depth adjustment from -0.5 mm to +2.8 mm, which helps fine-tune door gaps and alignment without moving the screw centers. The 6mm plate height works as a defined reference dimension, supporting consistent hinge geometry when used across multiple doors in a bank of cabinets. By combining these adjustments in the plate, this component simplifies door fitting on new installs and on service calls using compatible Salice hinge series.

Using This Salice Mounting Plate In Cabinet Work

Where This Two Cam Adjustable Hinge Plate Fits

This Domi 2-cam adjustable wing mounting plate is part of the Salice hinge hardware lineup, so it is intended for use in cabinet installations that rely on Salice hinges to hang and align doors. The plate is specified for hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, so it can serve across a wide range of Salice concealed hinge applications on a project. The 6mm height, combined with the die-cast steel body, provides a stable mounting interface between the cabinet side and the hinge arm, which supports repeatable geometry whether you are working on kitchen, bath, or other casework using these hinge series. Because the mounting style is screw-on with open holes for #6 x 5/8 inch wood screws, it suits cabinets built from materials that accept wood screw fastening in the side panel.

Why Its Cam Adjustments Support Consistent Results

The two cam design built into this Salice hinge mounting plate delivers separate height and depth adjustments, so alignment tasks stay at the plate instead of at the cabinet layout stage. The cam height range of plus or minus 2 mm allows small vertical corrections after the hinge is installed, which helps close up uneven reveals without changing drilling patterns. The cam depth range from -0.5 mm to +2.8 mm lets you move the door in or out relative to the cabinet front, helping compensate for material tolerances or minor casework irregularities. Because both adjustments are integrated into the nickel-plated, die-cast steel plate, the settings remain tied to a rigid base, supporting stable alignment over time. This adjustment structure is useful both for initial fitting and for later service adjustments on doors hung with compatible Salice hinge series.

Common Questions About BAR3R69 Mounting Plate Use

Select This Mounting Plate For Salice Hinge Runs

The Domi 2-cam adjustable wing mounting plate BAR3R69 from Salice America offers defined 6mm height, two-way cam adjustment, and screw-on mounting with #6 x 5/8 inch wood screws, making it a practical choice when working with Salice hinge series 100, 200, 400, F, M, Universal Hinges, or Silentia+. For cabinet jobs that rely on these hinges and need repeatable alignment, this nickel-plated, die-cast steel plate provides the adjustment range and stable interface needed to set door position accurately across a run of cabinets.