Domi 2-Cam Adjustment Wing Mounting Plate, Nickel-Plated, Screw-On, 12mm

Domi 2-Cam Adjustment Wing Mounting Plate Use

Domi 2-cam adjustment wing mounting plate describes a Salice America hinge mounting plate designed to work with Salice hinges and support precise door alignment. This hinge mounting plate belongs to the hinge mounting plates product class, so it provides the interface between the cabinet and the hinge arm. The 12mm specification identifies the mounting plate height, which sets the hinge position relative to the cabinet side and affects reveal and overlay planning. The screw-on description indicates that the plate fastens to the cabinet side using wood screws, so it suits jobs where a secure mechanical connection into the cabinet side is required. The nickel-plated finish over stamped steel or die-cast steel resists corrosion, which helps the plate perform in typical cabinet environments over the long term. The Domi designation and part number BAR3RC9 identify this specific two cam adjustable plate for repeatable purchasing and consistent hardware selection across projects.

Key Details That Support Cabinet Hinge Work

• The two cam adjustable design provides cam height adjustment of plus or minus 2 mm, allowing fine-tuning of door position vertically so small case or drilling variations can be compensated at install or during later adjustments.
• The same two cam system provides cam depth adjustment from -0.5 mm to +2.8 mm, which lets the installer set the door in or out relative to the cabinet front for better reveals and alignment with adjacent doors or panels.
• The cabinet side fastening method uses an open hole sized for #6 x 5/8 inch wood screws, so installers can drive standard wood screws directly into the cabinet side material without special inserts.
• The plate construction is stamped steel or die-cast steel with nickel plating, which delivers a rigid mounting surface for the hinge arm while resisting corrosion in normal cabinet applications such as kitchens, bathrooms, or built-ins.
• The design is identified as Domi two cam adjustable hinge mounting plates, aligning with Salice hinge families and helping hardware planners match base plates to hinge series in a consistent system.

Mounting Plate Installation And Adjustment Details

This 12mm screw-on hinge mounting plate uses an open hole pattern for #6 x 5/8 inch wood screws on the cabinet side, so installers can position the plate on the cabinet side panel and secure it with commonly available wood screws. The two cam adjustment controls offer plus or minus 2 mm in cam height adjustment, providing vertical movement of the door without redrilling the cabinet. The cam depth adjustment range of -0.5 mm to +2.8 mm lets the hinge arm move the door in or out relative to the cabinet face, which is helpful when aligning doors across a bank of cabinets. Nickel plating over stamped steel or die-cast steel creates a stable surface for these adjustments, supporting repeated fine-tuning of the hinge position over the life of the cabinet.

How This Salice Hinge Plate Supports Real Jobs

Using The Plate With Salice Hinge Series

This Salice America hinge mounting plate is described as compatible with hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+. That means the mounting plate works as the cabinet-side base for those Salice hinge arms, so a shop can standardize on one plate style for multiple hinge series. The plate belongs to the hinge mounting plates category, tying directly into common cabinet hinge layouts where a separate base plate and hinge arm are used. The Domi two cam adjustable description connects it to Salice systems built around cam adjustments, so installers who already use these hinges can match this BAR3RC9 plate into their existing drilling patterns and hinge planning. The 12mm plate height contributes to how these hinge series sit on the cabinet, forming part of the overlay and reveal calculations that matter when matching existing runs of cabinetry.

Adjustment Range That Reduces Door Rework

The two cam adjustment feature on this mounting plate provides cam height adjustment of plus or minus 2 mm, so small errors in drilling or case construction can be corrected at the plate rather than altering the cabinet. The cam depth adjustment of -0.5 mm to +2.8 mm gives the hinge arm effective in-and-out travel at the mounting point, allowing an installer to bring doors flush with neighboring fronts or to close small gaps between doors. Because these adjustments are built into the plate, they can be accessed after the door is hung, which supports service work and later fine-tuning on site. The nickel-plated stamped steel or die-cast steel body keeps the cams operating against a solid structure, supporting repeatable adjustments when cabinetry settles or when doors are rehung during remodel work.

Common Questions About This Hinge Mounting Plate

Selecting This Plate For Salice Cabinet Hinges

Choose this Domi 2-cam adjustment wing mounting plate when a Salice America hinge installation needs screw-on cabinet side fastening and precise cam height and depth adjustment. The 12mm plate height, two cam adjustment range, and compatibility with Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+ support consistent setups across multiple cabinet runs. The nickel-plated stamped steel or die-cast steel construction provides a stable base for those hinges in typical woodworking environments. Use the BAR3RC9 part number to align ordering with existing Salice hardware layouts and maintain the same hinge system from shop fabrication through field installation.