
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Domi 2-Cam Adjustable Wing Mounting Plate gives you a steel, screw-on hinge base engineered for Salice cabinet hinges, so you can set up consistent hinge positions across multiple doors on the same run. The stamped or die-cast steel construction provides a solid platform, which helps doors stay aligned under regular opening and closing in typical cabinet use. A nickel-plated finish adds corrosion resistance, supporting long-term performance in kitchens, baths, and shop environments where moisture and handling are common. With a 6mm plate height, this mounting plate establishes a predictable starting position between cabinet side and hinge arm, which helps experienced installers repeat the same reveal from cabinet to cabinet. Designed by Salice America for their hinge systems, this plate is built as part of a matched hinge assembly so the geometry from plate to hinge arm remains consistent.
This screw-on hinge mounting plate fastens through an open hole sized for #6 x 5/8 wood screws, giving you a straightforward installation method on cabinet sides built from common sheet goods. The two cam adjustment design provides cam height adjustment of plus or minus 2 mm, so you can raise or lower the door relative to the cabinet opening without shifting screw positions. Cam depth adjustment from -0.5 mm to +2.8 mm lets you pull the door closer or push it slightly away from the cabinet side, helping you close small gaps or clear adjacent components. With these adjustments built into the plate, you set the base once and then fine-tune the door fit directly at the hinge, which supports cleaner alignment and reduces rework on drilled holes.
This hinge mounting plate is specified for Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, so one plate style can serve across a wide range of Salice concealed hinges in a shop that standardizes on this brand. By working with those hinge series, it supports consistent layouts on face frame or frameless cabinets where Salice hinges are already part of the construction method. The 6mm plate height and Salice geometry give you a known reference when planning boring patterns, so you can design drilling jigs and CNC programs around a stable baseline. Because the plate is part of the Salice America system, it fits into builds where quiet, controlled door movement from these hinges is a design requirement.
The two cam adjustment on this plate gives you one cam dedicated to height and another to depth, turning small turns of each cam into predictable movement of the door. Cam height adjustment of plus or minus 2 mm lets you correct for slight drilling or cutting variation so door tops line up along a run of cabinets. Depth adjustment from -0.5 mm to +2.8 mm allows you to refine overlay or inset relationships, working within the range built into the plate instead of reworking cabinet parts. Because both adjustments are handled at the mounting plate, you can complete most door alignment using a screwdriver at the hinge location, which fits well into production assembly lines and on-site trim adjustments.
The BAR3L69F plate is a Domi 2-Cam Adjustable Wing Mounting Plate for Salice cabinet hinges, which serves as the hinge base plate on the cabinet side.
This mounting plate is for hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, letting one plate support multiple Salice hinge families on cabinet projects.
The two cam adjustment provides height and depth fine-tuning, allowing you to shift door position in millimeter increments instead of relocating mounting screws.
This plate provides cam height adjustment of plus or minus 2 mm and cam depth adjustment from -0.5 mm to +2.8 mm, covering typical cabinet door alignment needs.
The mounting plate uses an open hole for #6 x 5/8 wood screws, giving a direct screw-on connection into the cabinet side material.
The Salice mounting plate is constructed of stamped steel or die-cast steel with a nickel-plated finish, which supports strength and corrosion resistance.
The Domi 2-Cam Adjustable Wing Mounting Plate from Salice America combines a 6mm screw-on plate height with two cam adjustment, giving you a repeatable setup for cabinet doors. Pair this BAR3L69F plate with the specified Salice hinge series to keep hardware selection consistent across your projects while maintaining control over door alignment and overlay relationships.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBBAR3RC9 Mfr# BAR3RC9 | Domi 2-Cam Adjustment Wing Mounting Plate, Nickel-Plated, Screw-On, 12mm | ||||
Sold in: 1 Each | UBBAR3R99 Mfr# BAR3R99 | Domi 2-Cam Adjustment Wing Mounting Plate, Nickel-Plated, Screw-On, 9mm | ||||
Sold in: 1 Each | UBBAR3R69 Mfr# BAR3R69 | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 6mm, Salice BAR3R69 | ||||
Sold in: 1 Each | UBBAR3R39 Mfr# BAR3R39 | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 3mm | ||||
Sold in: 1 Each | UBBAR3R29 Mfr# BAR3R29 | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 2mm | ||||
Sold in: 1 Each | UBBAR3R09 Mfr# BAR3R09 | 0mm Die-cast Hinge Mounting Plate, 2 Cam, Screw-on, Salice BAR3R09 | ||||
Sold in: 1 Each | UBBAR3L39F Mfr# BAR3L39F | 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 3mm (300/Box) | ||||
Sold in: 1 Each | UBBAR3L09F Mfr# BAR3L09F | Domi 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 0mm, BAR3L09F |