Domi Snap-On Mounting Plates Two Cam Adjustment, Die-Cast Steel, Screw-On Attachment, 30mm Height

30mm Diecast Mounting Plate For Salice Hinges

30mm diecast mounting plate describes a Salice America hinge mounting plate with a 30mm height that sets consistent hinge positioning across a run of cabinet doors, which matters when you need uniform reveals and repeatable layouts on a job. This plate is part of the Salice hinge mounting plates class, so it works as the interface between the cabinet side and the hinge arm in a typical European-style cabinet construction. The screw-on attachment design fastens through open holes sized for #6 x 5/8 inch wood screws, giving installers a familiar fixing method on cabinet sides. Being a Domi snap-on mounting plate, it is designed for Salice snap-on style hinges, which helps speed up hinge engagement once the plates are installed.

Key Mounting Plate Details That Support Workflow

• This Salice America hinge mounting plate uses die-cast steel construction, which provides a solid base under the hinge arm so the door load transfers into the cabinet side instead of deforming thin hardware.
• The nickel plating on the die-cast steel helps resist corrosion, which keeps adjustment cams and bearing surfaces working smoothly in typical cabinet environments over time.
• Two cam adjustment is built into the plate, so installers can fine-tune both height and depth at the plate instead of re-drilling or shifting the cabinet side layout.
• The plate offers cam height adjustment of plus or minus 2 mm, giving enough vertical movement to align doors across a bank without changing hinge cup boring positions.
• The cam depth adjustment range of -0.5 mm to +2.8 mm lets you pull the door closer or move it slightly away from the cabinet, which helps correct reveals when cases are not perfectly square.

Screw-On Attachment And Snap-On Hinge Connection

The screw-on attachment style on this hinge mounting plate uses open holes for #6 x 5/8 inch wood screws on the cabinet side, so installers can set plates directly into solid wood or prepared cabinet case material. Once the mounting plates are fixed, the Domi snap-on connection works with Salice snap-on hinges, allowing the hinge arms to be clipped to the plates after doors are hung or finished. This workflow keeps carcass work, plate setting, and door installation as separate steps while still using the same plate height and adjustment range across a project.

Using BAR3RM9 Mounting Plate In Cabinet Projects

Where This Hinge Base Plate Fits In

This hinge base plate is specified as suitable for Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, so it serves as a common plate solution across multiple Salice hinge families. In practice, that means the same BAR3RM9 plate height and adjustment geometry can be used on different door programs that share those hinge series, helping streamline parts on the truck or in the shop. The 30mm height sets the hinge arm position relative to the cabinet side, which affects overlay and reveal relationships when combined with the chosen Salice hinge. Because it is a snap-on style plate for these hinge series, doors can be removed and reattached at the plate without disturbing the screw-on attachment into the cabinet side, which helps when finishing, transporting, or adjusting installed doors.

Adjustment That Supports Consistent Alignment

The two cam adjustment system on this plate provides both cam height and cam depth adjustment directly at the mounting interface. The cam height adjustment of plus or minus 2 mm gives a controlled vertical shift of the door line, so installers can align multiple doors to a reference top or bottom without shifting the cup bores. The cam depth range of -0.5 mm to +2.8 mm allows fine tuning of the door position in and out relative to the cabinet front, which matters when face frames or case edges vary slightly. This adjustment capability at the plate helps reduce rework because small cabinet variances can be corrected with a screwdriver instead of re-boring or moving plates. The plate is backed by a lifetime warranty, which supports long-term use in cabinet installations that must stay serviceable for years of opening and closing cycles.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Runs

This Salice hinge mounting plate with 30mm height, die-cast steel construction, and nickel plating offers a consistent base for hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+. The Domi snap-on interface and screw-on attachment with open holes for #6 x 5/8 inch wood screws support straightforward installation on cabinet sides. The two cam adjustment with defined height and depth ranges lets you align doors cleanly across cabinets while using a single BAR3RM9 mounting plate reference on the job.